lkml.org 
[lkml]   [2012]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: OMAP4 HDMI PHY bug work-around for stable
On Tue, Feb 28, 2012 at 10:03:13AM +0200, Tomi Valkeinen wrote:
> Hi,
>
> I haven't seen these merged nor any comment for these. Perhaps
> stable@kernel.org was wrong address, so adding stable@vger.kernel.org
> too.

Yes, stable@kernel.org has been "dead" since last October.

> I have added one additional fix into for-3.2-stable branch, which fixes
> a problem with panel detection that the GPIO changes brought.

Sorry, but I don't accept pull requests. I need patches in email form,
as described in the file, Documentation/stable_kernel_rules.txt. Please
feel free to send them from your git tree that way.

> On Thu, 2012-02-09 at 13:44 +0200, Tomi Valkeinen wrote:
> > Hi,
> >
> > There is a hardware bug on OMAP4, which may cause the HDMI output to
> > break irreversibly. A work-around for the bug has been merged into
> > mainline, but is missing from stable.
> >
> > I've backported the necessary patches on top of 3.0, 3.1 and 3.2 stable
> > trees, and pushed the following branches to:

3.1 is long dead, so I can't do anything with those patches, sorry.

> > git://gitorious.org/linux-omap-dss2/linux.git
> >
> > fixes/for-3.0-stable
> > fixes/for-3.1-stable
> > fixes/for-3.2-stable
> >
> > 3.0 and 3.1 branches additionally contain a patch "OMAP: DSS2: HDMI: use
> > default dividers", which fixes a problem with the HDMI clock divider.
> > Without that the HDMI output won't start at all on those versions.
> >
> > The branches contain the following backported patches:
> >
> > OMAP: DSS2: HDMI: use default dividers
> > OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios
> > OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD
> > OMAPDSS: remove wrong HDMI HPD muxing
> > OMAP: 4430SDP/Panda: setup HDMI GPIO muxes
> > OMAP: 4430SDP/Panda: add HDMI HPD gpio
> > OMAPDSS: HDMI: PHY burnout fix
> >
> > Of those, the actual fix is in the last one, but as the GPIOs for HDMI
> > were a mess, they needed some cleanup patches before the fix could be
> > made.

That seems like a lot of backporting for a single fix, but I'll be glad
to review them when you send them.

> > I'm not familiar with the process with stable kernels, so are the
> > branches above fine to get them merged? Or should I send the patches
> > with git-send-email?

Again, please read Documentation/stable_kernel_rules.txt, it explains
how this all works.

thanks,

greg k-h


\
 
 \ /
  Last update: 2012-02-28 17:53    [W:0.144 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site