lkml.org 
[lkml]   [2012]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[ 69/73] hwmon: (f75375s) Fix register write order when setting fans to full speed
3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolaus Schulz <schulz@macnetix.de>

commit c1c1a3d012fe5e82a9a025fb4b5a4f8ee67a53f6 upstream.

By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan
to full speed. In the f75375s driver, this need be done by enabling
manual fan control, plus duty mode for the F875387 chip, and then setting
the maximum duty cycle. Fix a bug where the two necessary register writes
were swapped, effectively discarding the setting to full-speed.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/hwmon/f75375s.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -304,8 +304,6 @@ static int set_pwm_enable_direct(struct
case 0: /* Full speed */
fanmode |= (3 << FAN_CTRL_MODE(nr));
data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (3 << FAN_CTRL_MODE(nr));
@@ -318,6 +316,9 @@ static int set_pwm_enable_direct(struct
}
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
+ if (val == 0)
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+ data->pwm[nr]);
return 0;
}




\
 
 \ /
  Last update: 2012-02-28 02:13    [W:0.202 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site