lkml.org 
[lkml]   [2012]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] Clear previous interrupts after fifo is disabled
On Mon, Feb 27, 2012 at 10:48:58AM +0000, Russell King - ARM Linux wrote:
> I'd much prefer to only clear those interrupts which actually need to be
> cleared at this point. So, I'd suggest this approach instead:

Thinking about this a little more, we definitely want to mask and clear
interrupts at probe time as well:

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 6800f5f..6b781bd 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1381,6 +1381,10 @@ static int pl011_startup(struct uart_port *port)

uap->port.uartclk = clk_get_rate(uap->clk);

+ /* Clear pending error and receive interrupts */
+ writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
+ UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
+
/*
* Allocate the IRQ
*/
@@ -1417,10 +1421,6 @@ static int pl011_startup(struct uart_port *port)
cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
writew(cr, uap->port.membase + UART011_CR);

- /* Clear pending error interrupts */
- writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
- uap->port.membase + UART011_ICR);
-
/*
* initialise the old status of the modem signals
*/
@@ -1927,6 +1927,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
goto unmap;
}

+ /* Ensure interrupts from this UART are masked and cleared */
+ writew(0, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
+
uap->vendor = vendor;
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;

\
 
 \ /
  Last update: 2012-02-27 12:05    [W:0.154 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site