lkml.org 
[lkml]   [2012]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/4] pch_uart: Cleanups, board quirks, and user uartclk parameter


On 02/22/2012 12:16 AM, Tomoya MORINAGA wrote:
> 2012年2月22日15:39 Darren Hart <dvhart@linux.intel.com>:
>> We can add a patch to this series that sets the
>> default to 192MHz, drops the CM-iTC quirk, and does nothing in pch_phub
>> probe for the FRI2.
>
> If you set the clock of pch_uart as 64MHz,
> do you need to add quirk for FRI2 to pch_phub so as to provide 64MHz clock?

I admit the value of pch_phub eludes me a bit. In my case, the firmware
sets up the CLKCFG register, so there is no need to set it manually
after boot. Instead, I'm making sure the pch_uart driver defaults to
what the firmware sets up.

--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel


\
 
 \ /
  Last update: 2012-02-22 10:01    [W:0.040 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site