lkml.org 
[lkml]   [2012]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: mmc sdhci mmcblk0: error -110 sending status command, retrying
From
On Mon, Feb 13, 2012 at 12:41 PM, Jeff Chua <jeff.chua.linux@gmail.com> wrote:
> I ran tests for frequency that works dd out 1G of data from 8MHz to
> 16MHz, and it seems frequency less than 8.4MHz can only transfer at
> rate of 14.3MB/s and above 8.4MHz, speed goes up to 18.3 MB/s. Above
> 17MHz, errors encounters.
>
> hz1  8000000  73.5029 s  14.3 MB/s
> hz2  8000000  73.4740 s  14.3 MB/s
> hz3  8000000  73.3982 s  14.3 MB/s
> hz1  8200000  71.9677 s  14.6 MB/s
> hz2  8200000  73.4936 s  14.3 MB/s
> hz3  8200000  73.3462 s  14.3 MB/s
> hz1  8400000  56.6296 s  18.5 MB/s
> hz2  8400000  56.7616 s  18.5 MB/s
> hz3  8400000  56.7926 s  18.5 MB/s
> hz1  8600000  56.6622 s  18.5 MB/s
> hz2  8600000  56.7201 s  18.5 MB/s
> hz3  8600000  56.6476 s  18.5 MB/s
> hz1  8800000  56.8846 s  18.4 MB/s
> hz2  8800000  56.8226 s  18.5 MB/s
> hz3  8800000  56.7070 s  18.5 MB/s

I've turned on write, and there's no error writing. But speed is
slower than accessing it via USB2 SD card reader. Same SD.

Via SD PCI
8.779 sec 4.04 %cpu
Via USB Reader
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-02-13 06:19    [W:0.062 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site