lkml.org 
[lkml]   [2012]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] firewire-sbp2: Fix SCSI sense data mangling
Date
SCSI sense data in SBP-2/3 is carried in an unusual format that means we
have to un-mangle it on our end before we pass it to the SCSI subsystem.
Currently our un-mangling code doesn't quite follow the SBP-2 standard
in that we always assume Current and never Deferred error types, we
never set the VALID bit, and we mishandle the FILEMARK, EOM and ILI
bits.

This patch fixes the sense un-mangling to correctly handle those and
follow the spec.

Signed-off-by: Chris Boot <bootc@bootc.net>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
drivers/firewire/sbp2.c | 13 +++++++++++--
1 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 1572a79..ff632c2 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1318,10 +1318,19 @@ static void sbp2_unmap_scatterlist(struct device *card_device,
static unsigned int sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
{
int sam_status;
+ int sfmt = (sbp2_status[0] >> 6) & 0x03;

- sense_data[0] = 0x70;
+ if (sfmt == 2 || sfmt == 3) {
+ /*
+ * Reserved for future standardization (2) or
+ * Status block format vendor-dependent (3)
+ */
+ return DID_ERROR << 16;
+ }
+
+ sense_data[0] = 0x70 | sfmt | (sbp2_status[1] & 0x80);
sense_data[1] = 0x0;
- sense_data[2] = sbp2_status[1];
+ sense_data[2] = ((sbp2_status[1] << 1) & 0xe0) | (sbp2_status[1] & 0x0f);
sense_data[3] = sbp2_status[4];
sense_data[4] = sbp2_status[5];
sense_data[5] = sbp2_status[6];
--
1.7.8.3


\
 
 \ /
  Last update: 2012-02-10 14:45    [W:0.070 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site