lkml.org 
[lkml]   [2012]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7] TWL6040: Regulator support
Date
Hello,

This series depends on the V3 of MFD: twl6040: Conversion to i2c driver set.

In order to have proper regulator support for twl6040 on SDP4430, and
PandaBoards I needed to add support for the V1V8, and V2V1 SMPS supplies from
twl6030.
The configuration on both boards (and the TRM recommendations) are the same, so
it make sens to have the V1V8, V2V1 supply configured in the twl-common to avoid
duplicated code in board files.

The last patch in this series was part of the V2 of MFD: twl6040: Conversion to
i2c driver set. I have added Mark's Reviewd-by tag, and also addressed his
comment regarding to the supplies member of the twl6040 struct (no need to
allocate it separately).

Regards,
Peter
---
Peter Ujfalusi (7):
OMAP: 4430SDP: Correct fixed regulator device ID
regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply
MFD: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPS
OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration
OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies
OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies
MFD: TWL6040: Add regulator support for VIO, V2V1 supplies

arch/arm/mach-omap2/board-4430sdp.c | 11 ++++++--
arch/arm/mach-omap2/board-omap4panda.c | 4 ++-
arch/arm/mach-omap2/twl-common.c | 43 ++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/twl-common.h | 2 +
drivers/mfd/twl-core.c | 10 +++++++
drivers/mfd/twl6040-core.c | 33 +++++++++++++++++++++---
drivers/regulator/twl-regulator.c | 2 +
include/linux/i2c/twl.h | 2 +
include/linux/mfd/twl6040.h | 2 +
9 files changed, 101 insertions(+), 8 deletions(-)

--
1.7.8.4



\
 
 \ /
  Last update: 2012-02-10 11:07    [W:0.067 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site