lkml.org 
[lkml]   [2012]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: high speed cams are not working on usbip
From
Hi,

在 2012年1月30日下午8:58,nagarjun kommineni <nagarjunkommineni@gmail.com> 寫道:
>
> Hi,
>
> I found that, beyond the resolution 352*288, network utilisation is beyond
> 100Mbps.
>

If I remember correctly, the usbip sugget using gigabit ethernet.
Since the maximum speed of usb 2.0 is 480Mb/s bigger than 100Mbps.

Regards,
David

>
> 2012/1/20 nagarjun kommineni <nagarjunkommineni@gmail.com>
>>
>> Hi,
>>
>> I think we need to increase the depth of video buffers in UVC subsystem.
>>
>>
>> On 1/16/12, nagarjun kommineni <nagarjunkommineni@gmail.com> wrote:
>> > Hi,
>> >
>> > Both server and client are working at 100Mbps.
>> >
>> > On 1/16/12, David Chang <dchang@suse.com> wrote:
>> >> Hi,
>> >>
>> >> 在 2012年1月11日下午3:47,nagarjun kommineni <nagarjunkommineni@gmail.com> 寫道:
>> >>> hi,
>> >>> these are the my test specifications.
>> >>>
>> >>> OS: Scientific Linux 6.1 (default kernel 2.6.32)
>> >>> Kernel: 3.1.4 (I have built it)
>> >>> Web Cam: Logitech Pro 9000
>> >>> Test App: Gstreamer
>> >>>
>> >>> To see the web cam output I have used the Gstreamer with the
>> >>> following
>> >>> command.
>> >>> gst-launch v4l2src !
>> >>> video/x-raw-yuv,width=160,height=120,framerate=15/1
>> >>> !
>> >>> ffmpegcolorspace ! autovideosink
>> >>>
>> >>> my cam supported resloutions are 160*120, 176*144, 320*240, 352*288,
>> >>> 640*480, 800*600, 960*720, 1600*1200.
>> >>>
>> >>> it works fine upto 320*240, beyond this it doesn't work.
>> >>
>> >> What's the speed of server and client network interface?
>> >>
>> >> David
>> >>>
>> >>>
>> >>> 2012/1/10 David Chang <dchang@suse.com>
>> >>>>
>> >>>> Hi Joey,
>> >>>>
>> >>>> 2012/1/10 joeyli <jlee@suse.com>:
>> >>>> > 於 二,2012-01-10 於 13:46 +0530,nagarjun kommineni 提到:
>> >>>> >> Hi,
>> >>>> >>
>> >>>> >> problem with usbip in drivers/staging/usbip
>> >>>> >>
>> >>>> >> I have configured one pc as server and one as client, with this
>> >>>> >> configuration high speed web cams are not working for higher
>> >>>> >> resolutions.
>> >>>> >>
>> >>>> >
>> >>>> > How "high" does this web's speed?
>> >>>> >
>> >>>> >> please have a look at this problem.
>> >>>> >>
>> >>>> >
>> >>>> > David,
>> >>>> > as I remember you test webcam in old kernel before? looks works
>> >>>> > fine.
>> >>>>
>> >>>> Yes, but I would suggest using lower resolution.
>> >>>>
>> >>>> Regards,
>> >>>> David
>> >>>> >
>> >>>> >
>> >>>> > Thanks
>> >>>> > Joey Lee
>> >>>> >
>> >>>> >
>> >>>> > --
>> >>>> > To unsubscribe from this list: send the line "unsubscribe
>> >>>> > linux-kernel"
>> >>>> > in
>> >>>> > the body of a message to majordomo@vger.kernel.org
>> >>>> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>> >>>> > Please read the FAQ at http://www.tux.org/lkml/
>> >>>
>> >>>
>> >>>
>> >>>
>> >>> --
>> >>> Regards,
>> >>> Nagarjuna Kommineni.
>> >>>
>> >>>
>> >>
>> >
>> >
>> > --
>> > Regards,
>> > Nagarjuna Kommineni.
>> >
>>
>>
>> --
>> Regards,
>> Nagarjuna Kommineni.
>
>
>
>
> --
> Regards,
> Nagarjuna Kommineni.
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-02-02 04:03    [W:0.064 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site