lkml.org 
[lkml]   [2012]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] fix readahead pipeline break caused by block plug
On Tue, Jan 31, 2012 at 05:03:33PM -0500, Vivek Goyal wrote:
> On Tue, Jan 31, 2012 at 03:59:40PM +0800, Shaohua Li wrote:
> > Herbert Poetzl reported a performance regression since 2.6.39. The test
> > is a simple dd read, but with big block size. The reason is:
> >
> > T1: ra (A, A+128k), (A+128k, A+256k)
> > T2: lock_page for page A, submit the 256k
> > T3: hit page A+128K, ra (A+256k, A+384). the range isn't submitted
> > because of plug and there isn't any lock_page till we hit page A+256k
> > because all pages from A to A+256k is in memory
> > T4: hit page A+256k, ra (A+384, A+ 512). Because of plug, the range isn't
> > submitted again.
> > T5: lock_page A+256k, so (A+256k, A+512k) will be submitted. The task is
> > waitting for (A+256k, A+512k) finish.
> >
> > There is no request to disk in T3 and T4, so readahead pipeline breaks.
> >
> > We really don't need block plug for generic_file_aio_read() for buffered
> > I/O. The readahead already has plug and has fine grained control when I/O
> > should be submitted. Deleting plug for buffered I/O fixes the regression.
> >
> > One side effect is plug makes the request size 256k, the size is 128k
> > without it. This is because default ra size is 128k and not a reason we
> > need plug here.
>
> For me, this patch helps only so much and does not get back all the
> performance lost in case of raw disk read. It does improve the throughput
> from around 85-90 MB/s to 110-120 MB/s but running the same dd with
> iflag=direct, gets me more than 250MB/s.
>
> # echo 3 > /proc/sys/vm/drop_caches
> # dd if=/dev/sdb of=/dev/null bs=1M count=1K
> 1024+0 records in
> 1024+0 records out
> 1073741824 bytes (1.1 GB) copied, 9.03305 s, 119 MB/s
>
> echo 3 > /proc/sys/vm/drop_caches
> # dd if=/dev/sdb of=/dev/null bs=1M count=1K iflag=direct
> 1024+0 records in
> 1024+0 records out
> 1073741824 bytes (1.1 GB) copied, 4.07426 s, 264 MB/s
>
> I think it is happening because in case of raw read we are submitting
> one page at a time to request queue and by the time all the pages
> are submitted and one big merged request is formed it wates lot of time.
>
> In case of direct IO, we are getting bigger IOs at request queue so
> less cpu overhead, less idling on queue.

Note that "dd bs=1M" will result in 128KB readahead IO. The buffered
dd reads may perform much better if 1MB readahead size is used:

blockdev --setra 2048 /dev/sda

> I created ext4 filesystem on same SSD and did the buffered read and
> that seems to work just fine. Now I am getting bigger requests at
> the request queue. (128K, 256 sectors).
>
> [root@chilli common]# echo 3 > /proc/sys/vm/drop_caches
> [root@chilli common]# dd if=zerofile-4G of=/dev/null bs=1M count=1K
> 1024+0 records in
> 1024+0 records out
> 1073741824 bytes (1.1 GB) copied, 4.09186 s, 262 MB/s

So the raw sda reads have some performance problems. What's the exact
blktrace sequence for sda reads? And the block size?

blockdev --getbsz /dev/sda

> Anyway, remvoing top level plug in case of buffered reads sounds
> reasonable.

Yup.

Thanks,
Fengguang


\
 
 \ /
  Last update: 2012-02-01 08:15    [W:1.477 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site