lkml.org 
[lkml]   [2012]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: ftrace: Ensure code modifications are synchronised across all cpus
On Fri, Dec 07, 2012 at 11:36:40AM -0500, Steven Rostedt wrote:
> On Fri, 2012-12-07 at 16:23 +0000, Russell King - ARM Linux wrote:
>
> > That's fine if there are better ways. If your view is that this would
> > bring things "up to the future" consider this: what you suggest is possible
> > with the standard ARM 32-bit instruction set. With the more modern Thumb
> > instruction set, because we now effectively have prefixes, where those
> > prefixes control the execution of the following instructions, what you
> > suggest becomes no longer possible.
> >
> > So, it's not a question of bringing stuff up to the future at all... you
> > can call it a design regression of you will, but you're really making
> > demands about how CPUs work which are outside of your remit.
> >
> > Think of this a bit like you changing the opcodes immediately following a
> > 'LOCK' prefix on x86. I suspect divorsing the following opcodes from its
> > prefix would be very bad for the instructions atomicity.
>
> But what about the limitations that the function tracer imposes on the
> code that gets modified by stop_machine()?
>
> 1) the original code is simply a call to mcount
>
> 2) on boot up, that call gets converted into a nop
>
> 3) the code that gets changed will only be converting a nop to a call
> into the function tracer, and back again.
>
> IOW, it's a very limited subset of the ARM assembly that gets touched.
> I'm not sure what the op codes are for the above, but I can imagine they
> don't impose the prefixes as you described.
>
> If that's the case, is it still possible to change to the breakpoint
> method?

I have no idea; I've no idea how ftrace works on ARM. That's something
other people use and deal with. Last (and only) time I used the built-in
kernel tracing facilities I ended up giving up with it and going back to
using my sched-clock+record+printk based approaches instead on account
of the kernels built-in tracing being far too heavy.


\
 
 \ /
  Last update: 2012-12-07 18:21    [W:0.099 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site