lkml.org 
[lkml]   [2012]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH resend] spi: Add support for specifying 3-wire mode via device tree
Date
This patch allows to specify that a SPI device is connected in 3-wire mode via
device tree.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
---
Documentation/devicetree/bindings/spi/spi-bus.txt | 2 ++
drivers/spi/spi.c | 2 ++
2 files changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index 77a8b0d..296015e 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -53,6 +53,8 @@ contain the following properties.
shifted clock phase (CPHA) mode
- spi-cs-high - (optional) Empty property indicating device requires
chip select active high
+- spi-3wire - (optional) Empty property indicating device requires
+ 3-wire mode.

If a gpio chipselect is used for the SPI slave the gpio number will be passed
via the cs_gpio
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 22c71e2..cb61ada 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -861,6 +861,8 @@ static void of_register_spi_devices(struct spi_master *master)
spi->mode |= SPI_CPOL;
if (of_find_property(nc, "spi-cs-high", NULL))
spi->mode |= SPI_CS_HIGH;
+ if (of_find_property(nc, "spi-3wire", NULL))
+ spi->mode |= SPI_3WIRE;

/* Device speed */
prop = of_get_property(nc, "spi-max-frequency", &len);
--
1.8.0


\
 
 \ /
  Last update: 2012-12-06 21:21    [W:0.035 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site