lkml.org 
[lkml]   [2012]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 3/3] dt: Document: Add optional MAX77686 operating mode bindings
Date
Add documenatation for various operating mode capabilities of
the MAX77686 PMIC.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
---
Documentation/devicetree/bindings/mfd/max77686.txt | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
index c6a3469..f2867a9 100644
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -13,6 +13,12 @@ Required properties:
- interrupts : This i2c device has an IRQ line connected to the main SoC.
- interrupt-parent : The parent interrupt controller.

+optional properties:
+- max77686-opmode : The regulators of max77686 have various operating mode
+ capabilities such as low power mode, standby mode (controlled by PWRREQ
+ signal) etc. Check the regulator CTRL register for the bits setting these
+ modes.
+
Optional node:
- voltage-regulators : The regulators of max77686 have to be instantiated
under subnode named "voltage-regulators" using the following format.
--
1.7.8.6


\
 
 \ /
  Last update: 2012-12-10 07:41    [W:0.099 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site