lkml.org 
[lkml]   [2012]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] bcm_wimax.ko - Modified supported device list [Correction]
From
On Thu, Nov 8, 2012 at 10:27 AM, Muhammad Minhazul Haque
<mdminhazulhaque@gmail.com> wrote:
> Mr. Kevin and everyone,
>
> There was a serious mistake in the previous message. I forgot to
> attach the patch. Please ignore it. I am posting it again.
>
> I was never reported for that product id 0x0132. Yet you can continue
> support for it if it is rare. In the meantime, we can add more devices
> to the header and add those names to "usb_device_id" table in
> "InterfaceInit.c". I added a new product string
> "BCM_USB_PRODUCT_ID_ZTE_326" and also modified the device id table.
>
> Again, I removed product if 0xbccd because Beceem, ZTE, Sprint use
> this id for the block device containing device driver. Again, this is
> always switched to base product id via udev. Here is my dmesg output
> when udev is turned off.
> =====
> root@inspiron:~# dmesg -c
> [24449.439134] cdrom: issuing MRW background format suspend
> [24459.102669] usb 2-1.2: new high-speed USB device number 11 using ehci_hcd
> [24459.336258] scsi11 : usb-storage 2-1.2:1.0
> [24460.334906] scsi 11:0:0:0: CD-ROM BCM-CD V 01.02 01.01
> 1.13 PQ: 0 ANSI: 2
> [24460.336721] sr0: scsi3-mmc drive: 0x/0x xa/form2 tray
> [24460.336971] sr 11:0:0:0: Attached scsi CD-ROM sr0
> [24460.337167] sr 11:0:0:0: Attached scsi generic sg1 type 5
>
> root@inspiron:~# mount /dev/sr1 /media/tmp
> mount: block device /dev/sr1 is write-protected, mounting read-only
> =====
>
> I did build after these changes and probed the module. It works
> perfectly. I also tested 0x0172 and 0x0173. No error is reported. So I
> assure that these products are valid. Not sure about 0x0132. Here is
> the modinfo output.
> =====
> license: GPL
> version: 5.2.45
> description: Beceem Communications Inc. WiMAX driver
> srcversion: 6968AC3635745331FE6470D
> alias: usb:v19D2p0132d*dc*dsc*dp*ic*isc*ip*
> alias: usb:v19D2p0007d*dc*dsc*dp*ic*isc*ip*
> alias: usb:v19D2p0173d*dc*dsc*dp*ic*isc*ip*
> alias: usb:v19D2p0172d*dc*dsc*dp*ic*isc*ip*
> alias: usb:v0489pE017d*dc*dsc*dp*ic*isc*ip*
> alias: usb:v198Fp015Ed*dc*dsc*dp*ic*isc*ip*
> alias: usb:v198Fp0300d*dc*dsc*dp*ic*isc*ip*
> alias: usb:v198Fp0220d*dc*dsc*dp*ic*isc*ip*
> alias: usb:v198Fp0210d*dc*dsc*dp*ic*isc*ip*
> depends:
> vermagic: 3.2.0-32-generic-pae SMP mod_unload modversions 686
> parm: debug:Debug level (0=none,...,16=all) (uint)
> =====
>
> This patch is currently against a linux 3.7-rc4 kernel, for the x86
> architecture.
>
> The first patch is
> =====
> diff --git a/bcm.orig/InterfaceInit.c b/bcm/InterfaceInit.c
> index b05f5f7..7da666e 100644
> --- a/bcm.orig/InterfaceInit.c
> +++ b/bcm/InterfaceInit.c
> @@ -4,11 +4,12 @@ static struct usb_device_id InterfaceUsbtable[] = {
> { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3) },
> { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3B) },
> { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_T3L) },
> - { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SM250) },
> - { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) },
> + { USB_DEVICE(BCM_USB_VENDOR_ID_T3, BCM_USB_PRODUCT_ID_SYM) },
> { USB_DEVICE(BCM_USB_VENDOR_ID_FOXCONN, BCM_USB_PRODUCT_ID_1901) },
> + { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_226) },
> { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_TU25) },
> { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_226) },
> + { USB_DEVICE(BCM_USB_VENDOR_ID_ZTE, BCM_USB_PRODUCT_ID_ZTE_326) },
> { }
> };
> MODULE_DEVICE_TABLE(usb, InterfaceUsbtable);
> =====
>
> And the second patch is
> =====
> diff --git a/bcm.orig/InterfaceInit.h b/bcm/InterfaceInit.h
> index 866924e..1486608 100644
> --- a/bcm.orig/InterfaceInit.h
> +++ b/bcm/InterfaceInit.h
> @@ -8,11 +8,11 @@
> #define BCM_USB_PRODUCT_ID_T3 0x0300
> #define BCM_USB_PRODUCT_ID_T3B 0x0210
> #define BCM_USB_PRODUCT_ID_T3L 0x0220
> -#define BCM_USB_PRODUCT_ID_SM250 0xbccd
> #define BCM_USB_PRODUCT_ID_SYM 0x15E
> -#define BCM_USB_PRODUCT_ID_1901 0xe017
> +#define BCM_USB_PRODUCT_ID_1901 0xe017 /* Sprint U1901 */
> #define BCM_USB_PRODUCT_ID_226 0x0132 /* not sure if this is valid */
> #define BCM_USB_PRODUCT_ID_ZTE_226 0x172
> +#define BCM_USB_PRODUCT_ID_ZTE_326 0x173 /* ZTE AX326 */
> #define BCM_USB_PRODUCT_ID_ZTE_TU25 0x0007
>
> #define BCM_USB_MINOR_BASE 192
> =====
>
> diffstat for this patch is:
> =====
> {bcm => bcm.orig}/InterfaceInit.c | 5 ++---
> {bcm => bcm.orig}/InterfaceInit.h | 4 ++--
> 2 files changed, 4 insertions(+), 5 deletions(-)
> =====

Thanks for these patches. I see the changes you have made a they look
good, however I am not able to apply these patches. Can you resubmit
them in the correct format?

> To use the patch, remove module if it is probed. Build, and then probe.
>
> About the TODO: I currently have a solution to make the device work.
> It is not from Intel's wimax stack. I used Beceem's API. Can we
> discuss on this?

Sure, lets work together to get this device working. It should be
working correctly on 32 bit machines, however there is still an
outstanding bug that I am trying to track down on 64 bit machines.
Have you noticed this also?

Thanks,
Kevin


\
 
 \ /
  Last update: 2012-11-09 06:21    [W:0.033 / U:20.616 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site