lkml.org 
[lkml]   [2012]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: Supermicro X9SRL-F - channel enumeration error & ACPI/firmware bug question
Date


-----Original Message-----
From: Robert Hancock [mailto:hancockrwd@gmail.com]
Sent: Wednesday, November 28, 2012 7:35 PM
To: Justin Piszcz
Cc: 'Bjorn Helgaas'; 'Bruno Prémont'; support@supermicro.com;
linux-kernel@vger.kernel.org; 'Dan Williams'
Subject: Re: Supermicro X9SRL-F - channel enumeration error & ACPI/firmware
bug question


What does lspci -vv show on that controller? Not sure what actual
chipset that controller is, but there's a known issue with some Marvell
6Gbps SATA controllers with DMAR enabled - it seems the device issues
memory read/write requests from the wrong PCI function ID and the IOMMU
rightly denies access as the function listed in the requests doesn't
have any mapping to that memory. I don't think there's presently a
workaround other than disabling DMAR. We could (and likely should) be
detecting that device and adding some kind of quirk for it.

That sounds likely...
It is shown below:

Card name: HighPoint Rocket 620 Dual Port SATA 6 Gbps PCI Express 2.0 Host
Adapter

lspci -vv output:

84:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA
6.0 Gb/s controller (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s
controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 119
Region 0: I/O ports at e000 [size=8]
Region 1: I/O ports at dc00 [size=4]
Region 2: I/O ports at ec00 [size=8]
Region 3: I/O ports at e800 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at cfeee000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at cfef0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee20000 Data: 4076
Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns,
L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt-
ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: ahci

>
> --
>
>
> ==> Further issues with the X9SRL-F -- does this board support ASPM or is
> this a Linux/ASPM implementation issue?
> [ 0.632170] pci0000:ff: ACPI _OSC support notification failed,
disabling
> PCIe ASPM
> [ 0.632239] pci0000:ff: Unable to request _OSC control (_OSC support
> mask: 0x08)

What's the full dmesg from this machine (or is it already posted somewhere)?

It is now available here:
http://home.comcast.net/~jpiszcz/20121128/dmesg.txt

Justin.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-11-29 02:01    [W:0.103 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site