lkml.org 
[lkml]   [2012]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v3 3/3] acpi_memhotplug: Allow eject to proceed on rebind scenario
From
Date
On Wed, 2012-11-28 at 22:40 +0100, Rafael J. Wysocki wrote:
> On Wednesday, November 28, 2012 02:02:48 PM Toshi Kani wrote:
> > > > > > > > > Consider the following case:
> > > > > > > > >
> > > > > > > > > We hotremove the memory device by SCI and unbind it from the driver at the same time:
> > > > > > > > >
> > > > > > > > > CPUa CPUb
> > > > > > > > > acpi_memory_device_notify()
> > > > > > > > > unbind it from the driver
> > > > > > > > > acpi_bus_hot_remove_device()
> > > > > > > >
> > > > > > > > Can we make acpi_bus_remove() to fail if a given acpi_device is not
> > > > > > > > bound with a driver? If so, can we make the unbind operation to perform
> > > > > > > > unbind only?
> > > > > > >
> > > > > > > acpi_bus_remove_device could check if the driver is present, and return -ENODEV
> > > > > > > if it's not present (dev->driver == NULL).
> > > > > > >
> > > > > > > But there can still be a race between an eject and an unbind operation happening
> > > > > > > simultaneously. This seems like a general problem to me i.e. not specific to an
> > > > > > > acpi memory device. How do we ensure an eject does not race with a driver unbind
> > > > > > > for other acpi devices?
> > > > > > >
> > > > > > > Is there a per-device lock in acpi-core or device-core that can prevent this from
> > > > > > > happening? Driver core does a device_lock(dev) on all operations, but this is
> > > > > > > probably not grabbed on SCI-initiated acpi ejects.
> > > > > >
> > > > > > Since driver_unbind() calls device_lock(dev->parent) before calling
> > > > > > device_release_driver(), I am wondering if we can call
> > > > > > device_lock(dev->dev->parent) at the beginning of acpi_bus_remove()
> > > > > > (i.e. before calling pre_remove) and fails if dev->driver is NULL. The
> > > > > > parent lock is otherwise released after device_release_driver() is done.
> > > > >
> > > > > I would be careful. You may introduce some subtle locking-related issues
> > > > > this way.
> > > >
> > > > Right. This requires careful inspection and testing. As far as the
> > > > locking is concerned, I am not keen on using fine grained locking for
> > > > hot-plug. It is much simpler and solid if we serialize such operations.
> > > >
> > > > > Besides, there may be an alternative approach to all this. For example,
> > > > > what if we don't remove struct device objects on eject? The ACPI handles
> > > > > associated with them don't go away in that case after all, do they?
> > > >
> > > > Umm... Sorry, I am not getting your point. The issue is that we need
> > > > to be able to fail a request when memory range cannot be off-lined.
> > > > Otherwise, we end up ejecting online memory range.
> > >
> > > Yes, this is the major one. The minor issue, however, is a race condition
> > > between unbinding a driver from a device and removing the device if I
> > > understand it correctly. Which will go away automatically if the device is
> > > not removed in the first place. Or so I would think. :-)
> >
> > I see. I do not think whether or not the device is removed on eject
> > makes any difference here. The issue is that after driver_unbind() is
> > done, acpi_bus_hot_remove_device() no longer calls the ACPI memory
> > driver (hence, it cannot fail in prepare_remove), and goes ahead to call
> > _EJ0. If driver_unbind() did off-line the memory, this is OK. However,
> > it cannot off-line kernel memory ranges. So, we basically need to
> > either 1) serialize acpi_bus_hot_remove_device() and driver_unbind(), or
> > 2) make acpi_bus_hot_remove_device() to fail if driver_unbind() is run
> > during the operation.
>
> OK, I see the problem now.
>
> What exactly is triggering the driver_unbind() in this scenario?

User can request driver_unbind() from sysfs as follows. I do not see
much reason why user has to do for memory, though.

echo "PNP0C80:XX" > /sys/bus/acpi/drivers/acpi_memhotplug/unbind


Thanks,
-Toshi





\
 
 \ /
  Last update: 2012-11-28 23:21    [W:0.164 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site