lkml.org 
[lkml]   [2012]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] gpio: New driver for GPO emulation using PWM generators
On 11/23/2012 10:44 AM, Peter Ujfalusi wrote:
> Hi Grant,
>
> On 11/23/2012 10:13 AM, Peter Ujfalusi wrote:
>> Hi Grant,
>>
>> On 11/23/2012 08:55 AM, Grant Likely wrote:
>>> Ugh. and this is why I wanted the PWM and GPIO subsystems to use the
>>> same namespace and binding. <grumble, mutter> But that's not your fault.
>>>
>>> It's pretty horrible to have a separate translator node to convert a PWM
>>> into a GPIO (with output only of course). The gpio properties should
>>> appear directly in the PWM node itself and the translation code should
>>> be in either the pwm or the gpio core. I don't think it should look like
>>> a separate device.
>>
>> Let me see if I understand your suggestion correctly. In the DT you suggest
>> something like this:
>>
>> twl_pwmled: pwmled {
>> compatible = "ti,twl4030-pwmled";
>> #pwm-cells = <2>;
>> #gpio-cells = <2>;
>> gpio-controller;
>> };
>
> After I thought about this.. Is this what we really want?
> After all what we have here is a PWM generator used to emulate a GPIO signal.
> The PWM itself can be used for driving a LED (standard LED or backlight and we
> have DT bindings for these already), vibra motor, or other things.
> If we combine the PWM with GPIO we should go and 'bloat' the DT node to also
> include all sort of other uses of PWM at once?
>
> IMHO it is better to keep them as separate things.
> pwm node to describe the PWM generator,
> separate nodes to describe it's uses like led, backlight, motor and gpio.
>

The difference here is that the LED, backlight, etc are all different
physical devices begin driven by the pwm pin, so it makes sense to have a
device tree node for them, while using the pwm as gpio is just a different
function of the same physical pin. So in a sense the pwm controller also
becomes a gpio controller. I like the idea of the pwm core automatically
instantiating a pwm-gpo device if it sees a gpio-controller property in the
pwm device devicetree node.

- Lars


\
 
 \ /
  Last update: 2012-11-26 12:21    [W:0.133 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site