lkml.org 
[lkml]   [2012]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/8] serial: xilinx_uartps: get clock rate info from dts
On Fri, Nov 02, 2012 at 10:20:33AM +0100, Lars-Peter Clausen wrote:
> On 10/31/2012 08:28 PM, Josh Cartwright wrote:
> > Add support for specifying clock information for the uart clk via the
> > device tree. This eliminates the need to hardcode rates in the device
> > tree.
> >
> > Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
> > ---
> > arch/arm/boot/dts/zynq-7000.dtsi | 4 ++--
> > drivers/tty/serial/xilinx_uartps.c | 30 +++++++++++++++++-------------
> > 2 files changed, 19 insertions(+), 15 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
> > index bb3085c..5fb763f 100644
> > --- a/arch/arm/boot/dts/zynq-7000.dtsi
> > +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> > @@ -44,14 +44,14 @@
> > compatible = "xlnx,xuartps";
> > reg = <0xE0000000 0x1000>;
> > interrupts = <0 27 4>;
> > - clock = <50000000>;
> > + clocks = <&uart_clk 0>;
> > };
> >
> > uart1: uart@e0001000 {
> > compatible = "xlnx,xuartps";
> > reg = <0xE0001000 0x1000>;
> > interrupts = <0 50 4>;
> > - clock = <50000000>;
> > + clocks = <&uart_clk 0>;
>
> Shouldn't this be <&uart_clk 1>?

Yes, indeed.

Thanks,
Josh
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2012-11-02 15:21    [W:0.208 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site