lkml.org 
[lkml]   [2012]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] RFC: pinctrl: grab default handler with bus notifiers
On 11/11/2012 05:22 AM, Linus Walleij wrote:
> From: Linus Walleij <linus.walleij@linaro.org>
>
> This makes the pinctrl subsystem auto-grab the pinctrl handle and
> set the "default" (PINCTRL_STATE_DEFAULT) state for every device
> that is present on the platform or AMBA (PrimeCell) bus right
> before probe. This will account for the lion's share of embedded
> silicon devcies. The behaviour is achieved using bus notifiers
> on the platform and AMBA (PrimeCell) busses.

Doing this seems reasonable.

> Notice that the patch disregards deferral as per above:
...
> Another solution that was discussed was whether to move
> the default pinctrl handle and state grab to the device
> core as an optional field in struct device itself, but
> I'd like to first propose this less intrusive mechanism.

I think doing that approach makes a lot more sense; wouldn't it
completely avoid the issues with deferred probe that this notifier-based
method can't solve? It would also be very much in line with e.g.
dev_get_regmap() - if every resource that a driver required were handled
like that, then deferred probe could be significantly isolated into the
driver core rather than in every driver...

> diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
> index da40efb..b6c27b1 100644
> --- a/Documentation/pinctrl.txt
> +++ b/Documentation/pinctrl.txt
> @@ -972,6 +972,19 @@ pinmux core.
> Pin control requests from drivers
> =================================
>
> +When a device driver is about to probe on the platform or AMBA (PrimeCell)
> +bus,

Why not make this apply to every device? I don't think the specific bus
type impacts whether pinctrl would be useful?

> @@ -1097,8 +1110,8 @@ situations that can be electrically unpleasant, you will certainly want to
> -The above can be hidden: using pinctrl hogs, the pin control driver may be
> -setting up the config and muxing for the pins when it is probing,
> +The above can be hidden: using device notifiers, the pinctrl core may be
> +setting up the config and muxing for the pins when the device is probing,
> nevertheless orthogonal to the GPIO subsystem.

Why removing "using pinctrl hogs"; can't "it" (although I didn't check
what "it" is...) be hidden using either pinctrl hogs or device notifiers?

> But there are also situations where it makes sense for the GPIO subsystem
> @@ -1144,6 +1157,13 @@ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-foo", NULL /* group */, "power_func")
>
> This gives the exact same result as the above construction.
>
> +This should not be used for any kind of device which is represented in
> +the device model. For platform and AMBA (PrimeCell) devices, such as found
> +in many SoC:s, the pinctrl core will listen to notifications from these
> +buses and attempt to do pinctrl_get_select_default() for these devices
> +right before their device drivers are probed, so hogging these will just
> +make the model look strange.

(re: the first sentence:) Why not? For the device tree case, that's
forcing DT authors to sprinkle the device tree across all devices
throughout the tree, rather than having a simple single "hog" table in
the pin controller itself. At least where there's no dynamic muxing
required, I don't think it makes any semantic difference whether the
pinctrl configuration is represented as a single "pinmux HW"
configuration, or split up per-device, and writing the single
centralized configuration is easier.

> diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c

> @@ -684,9 +687,16 @@ static struct pinctrl *pinctrl_get_locked(struct device *dev)
> if (WARN_ON(!dev))
> return ERR_PTR(-EINVAL);
>
> + /*
> + * See if somebody else (such as the pinctrl core, using the
> + * notifiers) has already obtained a handle to the pinctrl for
> + * this device. In that case, return another pointer to it.
> + */
> p = find_pinctrl(dev);
> - if (p != NULL)
> - return ERR_PTR(-EBUSY);
> + if (p != NULL) {
> + dev_dbg(dev, "obtain a copy of previously claimed pinctrl\n");
> + return p;

You'd want to implement full reference-counting then; IIRC, that's why I
banned pinctrl_get() running twice in the original code.


\
 
 \ /
  Last update: 2012-11-12 21:41    [W:0.081 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site