lkml.org 
[lkml]   [2012]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/5] regulator: tps65090: Add voltage out level in platform data
On Sat, Oct 06, 2012 at 08:47:50PM +0530, Laxman Dewangan wrote:

> TPS65090's DCDCs and FETs act as switch and so output
> voltage can be enable or disable only. The output voltage
> of this regulators depends on the input voltage.
> Add the voltage parameter to tell the output voltage value
> of these rails.

This should be using the recently added bypass support - the regualtors
should arrange to always report themselves as bypass (in the case of the
FETs, I'm not 100% sure what you mean for the DCDCs...) and the
framework should be reporting the input voltage for regulators in bypass
mode.


\
 
 \ /
  Last update: 2012-10-09 11:41    [W:0.238 / U:1.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site