lkml.org 
[lkml]   [2012]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v4 5/5] zynq: move static peripheral mappings
Shifting them up into the vmalloc region prevents the following warning,
when booting a zynq qemu target with more than 512mb of RAM:

BUG: mapping for 0xe0000000 at 0xe0000000 out of vmalloc space

In addition, it allows for reuse of these mappings when the proper
drivers issue requests via ioremap().

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Cc: John Linn <john.linn@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-zynq/common.c | 6 +++---
arch/arm/mach-zynq/include/mach/zynq_soc.h | 23 +++++++++++++----------
2 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index ba48f06..ba8d14f 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -73,12 +73,12 @@ static struct map_desc io_desc[] __initdata = {
{
.virtual = TTC0_VIRT,
.pfn = __phys_to_pfn(TTC0_PHYS),
- .length = SZ_4K,
+ .length = TTC0_SIZE,
.type = MT_DEVICE,
}, {
.virtual = SCU_PERIPH_VIRT,
.pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
- .length = SZ_8K,
+ .length = SCU_PERIPH_SIZE,
.type = MT_DEVICE,
},

@@ -86,7 +86,7 @@ static struct map_desc io_desc[] __initdata = {
{
.virtual = UART0_VIRT,
.pfn = __phys_to_pfn(UART0_PHYS),
- .length = SZ_4K,
+ .length = UART0_SIZE,
.type = MT_DEVICE,
},
#endif
diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h
index 218283a..c6b9b67 100644
--- a/arch/arm/mach-zynq/include/mach/zynq_soc.h
+++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h
@@ -15,27 +15,30 @@
#ifndef __MACH_XILINX_SOC_H__
#define __MACH_XILINX_SOC_H__

+#include <asm/pgtable.h>
+
#define PERIPHERAL_CLOCK_RATE 2500000

-/* For now, all mappings are flat (physical = virtual)
+/* Static peripheral mappings are mapped at the top of the
+ * vmalloc region
*/
-#define UART0_PHYS 0xE0000000
-#define UART0_VIRT UART0_PHYS
+#define UART0_PHYS 0xE0000000
+#define UART0_SIZE SZ_4K
+#define UART0_VIRT (VMALLOC_END - UART0_SIZE)

-#define TTC0_PHYS 0xF8001000
-#define TTC0_VIRT TTC0_PHYS
+#define TTC0_PHYS 0xF8001000
+#define TTC0_SIZE SZ_4K
+#define TTC0_VIRT (UART0_VIRT - TTC0_SIZE)

-#define SCU_PERIPH_PHYS 0xF8F00000
-#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS
+#define SCU_PERIPH_PHYS 0xF8F00000
+#define SCU_PERIPH_SIZE SZ_8K
+#define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE)

/* The following are intended for the devices that are mapped early */

#define TTC0_BASE IOMEM(TTC0_VIRT)
#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)

-/*
- * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical
- */
#define LL_UART_PADDR UART0_PHYS
#define LL_UART_VADDR UART0_VIRT

--
1.8.0

\
 
 \ /
  Last update: 2012-10-25 04:21    [W:0.176 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site