lkml.org 
[lkml]   [2012]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] Enable A20 using KBC for some MSI laptops to fix S3 resume
Date
On Wednesday 24 October 2012 21:36:04 H. Peter Anvin wrote:
> Minor concern: it should do the wait for ready before sending each command.

It was a hack and then I forgot to add the waits... Should I redo the patch?
I'll not be able to test it as I have to return the machine.

> "Rafael J. Wysocki" <rjw@sisk.pl> wrote:
> >On Wednesday 24 of October 2012 08:47:52 Ondrej Zary wrote:
> >> Some MSI laptop BIOSes are broken - INT 15h code uses port 92h to
> >
> >enable A20
> >
> >> line but resume code assumes that KBC was used.
> >> The laptop will not resume from S3 otherwise but powers off after a
> >
> >while
> >
> >> and then powers on again stuck with a blank screen.
> >>
> >> Fix it by enabling A20 using KBC. Affected laptop list and DMI data
> >
> >are from
> >
> >> bug reports at Ubuntu Launchpad.
> >>
> >> Tested with EX600 and PR200.
> >>
> >> Fixes https://bugzilla.kernel.org/show_bug.cgi?id=12878
> >>
> >> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
> >
> >Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> >> --- a/arch/x86/kernel/acpi/boot.c
> >> +++ b/arch/x86/kernel/acpi/boot.c
> >> @@ -1349,6 +1349,20 @@ static int __init
> >
> >dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
> >
> >> }
> >>
> >> /*
> >> + * Enable A20 line using KBC even if it's already enabled using
> >
> >other method.
> >
> >> + * This is needed for some MSI laptops to resume from S3.
> >> + */
> >> +static int __init a20_enable_kbc(const struct dmi_system_id *d)
> >> +{
> >> + printk(KERN_NOTICE "%s detected: enabling A20 using KBC\n",
> >
> >d->ident);
> >
> >> + outb(0xd1, 0x64); /* Command write */
> >> + outb(0xdf, 0x60); /* A20 on */
> >> + outb(0xff, 0x64); /* Null command, but UHCI wants it */
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +/*
> >> * If your system is blacklisted here, but you find that acpi=force
> >> * works for you, please contact linux-acpi@vger.kernel.org
> >> */
> >> @@ -1423,6 +1437,60 @@ static struct dmi_system_id __initdata
> >
> >acpi_dmi_table[] = {
> >
> >> DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
> >> },
> >> },
> >> + /*
> >> + * Some MSI laptop BIOSes are broken - INT 15h code uses port 92h
> >
> >to
> >
> >> + * enable A20 line but resume code assumes that KBC was used.
> >> + * The laptop will not resume from S3 otherwise but powers off
> >> + * after a while and then powers on again stuck with a blank
> >
> >screen.
> >
> >> + */
> >> + {
> >> + .callback = a20_enable_kbc,
> >> + .ident = "MSI EX600 Laptop",
> >> + .matches = {
> >> + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
> >> + DMI_MATCH(DMI_PRODUCT_NAME, "MSI Notebook EX600"),
> >> + },
> >> + },
> >> + {
> >> + .callback = a20_enable_kbc,
> >> + .ident = "MSI EX700 Laptop",
> >> + .matches = {
> >> + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
> >> + DMI_MATCH(DMI_PRODUCT_NAME, "EX700"),
> >> + },
> >> + },
> >> + {
> >> + .callback = a20_enable_kbc,
> >> + .ident = "MSI GX700 Laptop",
> >> + .matches = {
> >> + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
> >> + DMI_MATCH(DMI_PRODUCT_NAME, "GX700"),
> >> + },
> >> + },
> >> + {
> >> + .callback = a20_enable_kbc,
> >> + .ident = "MSI VR201 Laptop",
> >> + .matches = {
> >> + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
> >> + DMI_MATCH(DMI_PRODUCT_NAME, "MSI Notebook VR201"),
> >> + },
> >> + },
> >> + {
> >> + .callback = a20_enable_kbc,
> >> + .ident = "MSI VR601 Laptop",
> >> + .matches = {
> >> + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
> >> + DMI_MATCH(DMI_PRODUCT_NAME, "MSI Notebook VR601"),
> >> + },
> >> + },
> >> + {
> >> + .callback = a20_enable_kbc,
> >> + .ident = "MSI PR200 Laptop",
> >> + .matches = {
> >> + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
> >> + DMI_MATCH(DMI_PRODUCT_NAME, "MSI Notebook PR200"),
> >> + },
> >> + },
> >> {}
> >> };


--
Ondrej Zary


\
 
 \ /
  Last update: 2012-10-25 01:01    [W:0.113 / U:1.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site