lkml.org 
[lkml]   [2012]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config update
On 10/24/2012 04:01 PM, Thomas Petazzoni wrote:
> Hello,
>
> Shouldn't you split into one commit adding the SATA definition in
> the .dtsi + doing the defconfig change (the "SoC" level modifications),
> and then another commit for the .dts change? I don't really care
> personally, it's really up to Jason/Andrew on this.
>
> Another comment below, though.
>
> On Wed, 24 Oct 2012 15:49:21 +0200, Gregory CLEMENT wrote:
>
>> diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
>> index 94b4b9e..3f08233 100644
>> --- a/arch/arm/boot/dts/armada-370-xp.dtsi
>> +++ b/arch/arm/boot/dts/armada-370-xp.dtsi
>> @@ -69,6 +69,16 @@
>> compatible = "marvell,armada-addr-decoding-controller";
>> reg = <0xd0020000 0x258>;
>> };
>> +
>> + sata@d00a0000 {
>> + compatible = "marvell,orion-sata";
>> + reg = <0xd00a0000 0x2400>;
>> + interrupts = <55>;
>> + nr-ports = <2>;
>> + clocks = <&coreclk 0>;//, <&coreclk 0>;
>
> Alignment problem + remainings of tests or something like that.

True I missed this one.

Jason, Andrew, do you want I split this patch as suggested by Thomas or
are you fine with having one single patch?

I will wait your answer before sending the V2.

Thanks,

Gregory


\
 
 \ /
  Last update: 2012-10-24 16:41    [W:0.362 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site