lkml.org 
[lkml]   [2012]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subject[GIT PULL] First round of SCSI updates for the 3.6+ merge window
From
Date
This is a large set of updates, mostly for drivers (qla2xxx [including
support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa,
be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas). There's
also a rework for tape adding virtually unlimited numbers of tape drives
plus a set of dif fixes for sd and a fix for a live lock on hot remove
of SCSI devices.

This round includes a signed tag pull of isci-for-3.6

Because of the need to keep the tree stable for next testing, anything
submitted after last Saturday will be in the next round.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-for-linus

The short changelog is

Adam Radford (3):
megaraid_sas: Version and Changelog update
megaraid_sas: Add resetwaittime module parameter
megaraid_sas: Add throttlequeuedepth module parameter

Alexey Khoroshilov (1):
mpt2sas: fix double mutex lock in NON_BLOCKING state

Andi Kleen (1):
Fix incorrect memset in bnx2fc_parse_fcp_rsp

Andrew Vasquez (2):
qla2xxx: Fail initialization if unable to load RISC code.
qla2xxx: Ensure PLOGI is sent to Fabric Management-Server upon request.

Artur Wojcik (1):
isci: implement suspend/resume support

Arun Easi (5):
qla2xxx: Use the right field for container_of.
qla2xxx: Fix incorrect status reporting on DIF errors.
qla2xxx: T10 DIF - ISP83xx changes.
qla2xxx: Use #defines instead of hardcoded values for intr status.
qla2xxx: Fix for continuous rescan attempts in arbitrated loop topology.

Atul Deshmukh (1):
qla2xxx: Wrong PCIe(2.5Gb/s x8) speed in the kerenel message for ISP82xx.

Bart Van Assche (1):
scsi_dh_alua: Enable STPG for unavailable ports

Benjamin Herrenschmidt (2):
ibmvscsi: Fix host config length field overflow
ibmvscsi: Remove backend abstraction

Brian King (6):
ibmvfc: Driver version 1.0.10
ibmvfc: Ignore fabric RSCNs when link is dead
ibmvfc: Fix double completion on abort timeout
ipr: Driver version 2.5.4
ipr: Reduce interrupt lock time
ipr: Reduce queuecommand lock time

Chad Dupuis (12):
qla2xxx: Update version number to 8.04.00.07-k.
qla2xxx: Set Maximum Read Request Size to 4K.
qla2xxx: Fix for handling some error conditions in loopback.
qla2xxx: Fix description of qla2xmaxqdepth parameter.
qla2xxx: Remove setting Scsi_host->this_id during adapter probe.
qla2xxx: Implement beacon support for ISP83xx.
qla2xxx: Only enable link up on the correct interrupt event.
qla2xxx: Update the driver copyright.
qla2xxx: Changes for ISP83xx loopback support.
qla2xxx: Use bitmap to store loop_id's for fcports.
qla2xxx: Add check in qla82xx_watchdog for failed hardware state.
qla2xxx: Bind to ISP8031 devices.

Dan Carpenter (4):
ipr: remove an unneeded check
ipr: missing unlock before a return
isci: add a couple __iomem annotations
isci: make function declaration match implementation

Dan Williams (6):
scsi_remove_target: fix softlockup regression on hot remove
libsas, ipr: cleanup ata_host flags initialization via ata_host_init
libsas: suspend / resume support
libata: export ata_port suspend/resume infrastructure for sas
libata: reset once
isci: fix isci_pci_probe() generates warning on efi failure path

Dave Jiang (1):
isci: Fix interrupt coalescing assumption of active TCs

Dave Maurer (1):
isci: fix COMSAS negation timout workaround for WD SAS drives

Fengguang Wu (1):
megaraid_sas: combine kmalloc+memset into kzalloc

Giridhar Malavali (4):
qla2xxx: Allow MSI interrupt registration for ISP82xx.
qla2xxx: Don't toggle RISC interrupt bits after IRQ lines are attached.
qla2xxx: Fix for legacy interrupts for ISP83xx.
qla2xxx: Don't register to legacy interrupt for ISP82xx.

Hanjun Guo (1):
Fusion MPT: disable pci device when mpt map resoures failed

Hannes Reinecke (1):
st: remove st_mutex

Harish Zunjarrao (1):
qla2xxx: Add FW DUMP SIZE sysfs attribute.

James Smart (33):
lpfc 8.3.34: Update lpfc version for 8.3.34 driver release
lpfc 8.3.34: Fixed leaking memory from pci dma pool
lpfc 8.3.34: Correct lock handling to eliminate reset escalation on I/O abort
lpfc 8.3.34: Adjust IO Channels to 1 when INTx
lpfc 8.3.34: Add XRI to abort handler timeout log message
lpfc 8.3.34: Streamline fcp underrun message printing
lpfc 8.3.34: Correct typecasts for snprintf messages
lpfc 8.3.34: Simplify BlockGuard lpfc_printf_vlog messages
lpfc 8.3.34: Fix parameter field in CQE to mask for LOCAL_REJECT status
lpfc 8.3.34: Fix number of IO channels to match CPUs
lpfc 8.3.34: Add SLI-4 V1 Capacity and Resource Descriptor support
lpfc 8.3.34: Add LOGO support after ABTS compliance
lpfc 8.3.33: Update lpfc version for 8.3.33 driver release
lpfc 8.3.33: Fixed incomplete list of SLI4 commands with extended timeout value
lpfc 8.3.33: Fixed debugfs queInfo to include queue stats
lpfc 8.3.33: Add lpfc_fcp_look_ahead module parameter
lpfc 8.3.33: Make I/O to hw queue distribution algorithm a module parameter
lpfc 8.3.33: Change Naming convention for SLI4 Interrupt vector
lpfc 8.3.33: Allow per-hba interrupt rate tuning
lpfc 8.3.33: Tie parallel I/O queues into separate MSIX vectors
lpfc 8.3.33: Add Interrupts per second stats via debugfs
lpfc 8.3.33: Parallelize SLI-4 Q distribution
lpfc 8.3.33: Misc changes to optimize critical path
lpfc 8.3.33: Formally separate lpfc_sli_ring SLI-3 and SLI-4 variantions
lpfc 8.3.33: Convert to no SCSI host lock in queuecommand
lpfc 8.3.33: Add debugfs interface to display SLI queue information
lpfc 8.3.33: Fix error when remote port switches address
lpfc 8.3.33: Fix scsi_eh escalation panic by checking the proper return status
lpfc 8.3.33: Check data transfer amount on write commands
lpfc 8.3.33: Fix error of not reiniting mbx cmd before reissue
lpfc 8.3.33: Fix bug with rrq_pool not being destroyed during driver removal.
lpfc 8.3.33: Enable attachment to OCe14000 adapters
lpfc 8.3.33: When doing loopback testing, set the diag valid bit

Jeff Mahoney (5):
st: raise device limit
st: clean up device file creation and removal
st: get rid of scsi_tapes array
st: clean up dev cleanup in st_probe
st: Use static class attributes

Jeff Skirvin (1):
isci: Allow SSP tasks into the task management path.

Jianpeng Ma (1):
mvsas: Fix oops when ata commond timeout.

Joe Carnuccio (3):
qla2xxx: Do PCI fundamental reset for ISP83xx
qla2xxx: Add bit to identify adapters for thermal temp.
qla2xxx: Add I2C BSG interface.

John Soni Jose (7):
be2iscsi: Bump the driver version.
be2iscsi: Fix a kernel panic because of TCP RST/FIN received.
be2iscsi: Add support for configuring the VLAN on the adapter.
be2iscsi: Format the MAC_ADDR with sysfs_format_mac.
be2iscsi: Added Logging mechanism for the driver.
be2iscsi: Issue MBX Cmd for login to boot target in crashdump mode
be2iscsi: Removing the iscsi_data_pdu setting.

Julia Lawall (1):
zfcp: remove invalid reference to list iterator variable

Kleber Sacilotto de Souza (1):
ipr: trivial: fix small coding style issues

Krishna Gudipati (10):
bfa: Update the driver version to v3.1.2.0.
bfa: Update MAINTAINERS file for BFA driver.
bfa: Add support for max target ports discovery
bfa: Add support to register node symbolic name with name server
bfa: Fix to process mbox interrupts only if interrupts are enabled in INTx mode.
bfa: Add PowerPC support and enable PCIE AER handling.
bfa: Add new hardware model info to sysfs model description routine.
bfa: Make changes to FCXP resource management.
bfa: FCS remote port enhancements.
bfa: Support vport symbolic name change from sysfs.

Lalit Chandivade (1):
qla4xxx: Properly handle SCSI underrun while processing status IOCBs.

Manish Dusane (2):
qla4xxx: Fix double clearing of risc_intr for ISP83XX
qla4xxx: Added new mbox cmd to pass driver version to FW

Manish Rangankar (2):
qla4xxx: Fix multiple conn login event issue during session recovery.
qla4xxx: Fix memory corruption issue in qla4xxx_ep_connect.

Martin K. Petersen (6):
sd: Ensure we correctly disable devices with unknown protection type
mpt2sas: Add a module parameter that permits overriding protection capabilities
mpt2sas: Return the correct sense key for DIF errors
Disable DIF on Hitachi Ultrastar 15K300
sd: Allow protection_type to be overridden
sd: Avoid remapping bad reference tags

Martin Peschke (1):
zfcp: only access zfcp_scsi_dev for valid scsi_device

Martin Pitt (1):
scsi_debug: Add "removable" parameter

Masanari Iida (1):
qla2xxx: Fix typo in qla2xxx files

Mike Miller (1):
hpsa: gen8plus Smart Array IDs

Moger, Babu (4):
scsi_dh_rdac : minor return fix for rdac
scsi_dh_rdac : Consolidate rdac strings together
scsi_dh_rdac: Add a new netapp vendor/product string
add DID_TARGET_FAILURE and DID_NEXUS_FAILURE to hostbyte_table in constants.c

Nilesh Javali (1):
qla4xxx: IDC implementation for Loopback

Poornima Vonti (2):
qla4xxx: Fail probe_adapter if IRQ allocation fails
qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery

Rob Evers (1):
iscsi_tcp: increase max_lun to ~0, don't care

Robert Jennings (1):
ibmvscsi: Add maintainer for IBM virtual SCSI/FC drivers

Robert Love (1):
fc-transport: Remove unnecessary include

Santosh Vernekar (2):
qla2xxx: Perform ROM mbx cmd access only after ISP soft-reset during f/w recovery.
qla2xxx: IDC implementation for ISP83xx.

Saurav Kashyap (10):
qla2xxx: Restrict nic core reset to one function for mctp.
qla2xxx: Enable fw attributes for ISP24xx and above.
qla2xxx: Get fcal position map should not be called for p2p topology.
qla2xxx: Enclose adapter related calls in adapter check in failed state handler.
qla2xxx: set idc version if function is first one to come.
qla2xxx: Do not restrict the number of NPIV ports for ISP83xx.
qla2xxx: Dont call nic restart firmware if it is already active and running.
qla2xxx: Implemetation of mctp.
qla2xxx: Implementation of bidirectional.
qla2xxx: Display mailbox failure by default.

Steffen Maier (6):
zfcp: No automatic port_rescan on events
zfcp: restore refcount check on port_remove
zfcp: Do not wakeup while suspended
zfcp: Bounds checking for deferred error trace
zfcp: Make trace record tags unique
zfcp: Adapt to new FC_PORTSPEED semantics

Stephen M. Cameron (3):
hpsa: use ioremap_nocache instead of ioremap
hpsa: fix incorrect abort diagnostic message
hpsa: Use LUN reset instead of target reset

Tej Parkash (1):
qla4xxx: Disable generating pause frames for ISP83XX

Vikas Chaudhary (26):
qla4xxx: Update driver version to 5.03.00-k1
qla4xxx: update copyrights in LICENSE.qla4xxx
qla4xxx: Fix panic while rmmod
qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX
qla4xxx: Update idc reg in case of PCI AER
qla4xxx: Clear interrupt while unloading driver for ISP83XX
qla4xxx: Print correct IDC version
qla4xxx: Update driver version to 5.03.00-k0
qla4xxx: Update Copyright header
qla4xxx: Added support for ISP83XX
qla4xxx: Added new function qla4_8xxx_get_minidump
qla4xxx: Set IDC version in correct way
qla4xxx: Replace all !is_qla8022() with is_qla40XX()
qla4xxx: Added new functions in isp_ops
qla4xxx: Clean-up and optimize macros
qla4xxx: Rename 82XX macros
qla4xxx: Update func name from ql4_ to qla4_
qla4xxx: Update structure and variable names
qla4xxx: Update function name from 8xxx to 82xx
qla4xxx: Update driver version to 5.02.00-k20
qla4xxx: Wait for cmd to complete before chip reset for ISP40XX
qla4xxx: Clear interrupt while unloading driver.
qla4xxx: Fix lockdep warning in qla4xxx_post_work()
scsi_lib: Set the device state from transport-offline to running
qla4xxx: Update driver version to 5.02.00-k19
qla4xxx: Fix gcc warning for x86 system

sreekanth.reddy@lsi.com (8):
mpt2sas: Bump driver vesion to 14.100.00.00
mpt2sas: Fix for With post diag reset same set of device gets added, removed and then again gets added with new target ids
mpt2sas: Fix for staged device discovery functionality of driver not working
mpt2sas : MPI 2.0 Rev V(2.0.14) specification
mpt2sas: Fix for max_sectors warning message is stating the incorrect range
mpt2sas: Provide sysfs attribute to report Backup Rail Monitor Status
mpt2sas: To include more Intel Branding
mpt2sas: 2012 source code copyright

And the diffstat:

Documentation/kernel-parameters.txt | 3 +
Documentation/scsi/ChangeLog.megaraid_sas | 10 +
Documentation/scsi/LICENSE.qla2xxx | 2 +-
Documentation/scsi/LICENSE.qla4xxx | 2 +-
Documentation/scsi/st.txt | 6 +-
MAINTAINERS | 8 +-
drivers/ata/libata-core.c | 69 +-
drivers/ata/libata-eh.c | 2 +
drivers/message/fusion/mptbase.c | 18 +-
drivers/s390/scsi/zfcp_aux.c | 1 +
drivers/s390/scsi/zfcp_ccw.c | 80 +-
drivers/s390/scsi/zfcp_cfdc.c | 2 +-
drivers/s390/scsi/zfcp_dbf.c | 22 +-
drivers/s390/scsi/zfcp_dbf.h | 1 +
drivers/s390/scsi/zfcp_def.h | 2 +
drivers/s390/scsi/zfcp_erp.c | 2 +-
drivers/s390/scsi/zfcp_ext.h | 4 +
drivers/s390/scsi/zfcp_fc.c | 23 +-
drivers/s390/scsi/zfcp_fsf.c | 59 +-
drivers/s390/scsi/zfcp_qdio.c | 16 +-
drivers/s390/scsi/zfcp_sysfs.c | 18 +-
drivers/s390/scsi/zfcp_unit.c | 36 +-
drivers/scsi/be2iscsi/be_cmds.c | 160 ++-
drivers/scsi/be2iscsi/be_cmds.h | 27 +
drivers/scsi/be2iscsi/be_iscsi.c | 355 ++++--
drivers/scsi/be2iscsi/be_main.c | 890 +++++++++------
drivers/scsi/be2iscsi/be_main.h | 40 +-
drivers/scsi/be2iscsi/be_mgmt.c | 314 +++++-
drivers/scsi/be2iscsi/be_mgmt.h | 11 +
drivers/scsi/bfa/bfa_core.c | 21 +-
drivers/scsi/bfa/bfa_cs.h | 4 +-
drivers/scsi/bfa/bfa_defs_fcs.h | 18 +
drivers/scsi/bfa/bfa_fc.h | 10 +
drivers/scsi/bfa/bfa_fcbuild.c | 21 +
drivers/scsi/bfa/bfa_fcbuild.h | 2 +
drivers/scsi/bfa/bfa_fcpim.c | 12 +-
drivers/scsi/bfa/bfa_fcs.c | 182 ++-
drivers/scsi/bfa/bfa_fcs.h | 66 +-
drivers/scsi/bfa/bfa_fcs_fcpim.c | 129 ++-
drivers/scsi/bfa/bfa_fcs_lport.c | 632 ++++++++++-
drivers/scsi/bfa/bfa_fcs_rport.c | 466 ++++++--
drivers/scsi/bfa/bfa_ioc.c | 24 +-
drivers/scsi/bfa/bfa_ioc.h | 2 +
drivers/scsi/bfa/bfa_modules.h | 1 +
drivers/scsi/bfa/bfa_svc.c | 95 +-
drivers/scsi/bfa/bfa_svc.h | 23 +-
drivers/scsi/bfa/bfad.c | 236 +++-
drivers/scsi/bfa/bfad_attr.c | 46 +-
drivers/scsi/bfa/bfad_bsg.c | 39 +-
drivers/scsi/bfa/bfad_bsg.h | 2 +
drivers/scsi/bfa/bfad_drv.h | 5 +-
drivers/scsi/bfa/bfad_im.c | 9 +
drivers/scsi/bnx2fc/bnx2fc_io.c | 2 +-
drivers/scsi/constants.c | 3 +-
drivers/scsi/device_handler/scsi_dh_alua.c | 3 +-
drivers/scsi/device_handler/scsi_dh_rdac.c | 26 +-
drivers/scsi/hpsa.c | 39 +-
drivers/scsi/ibmvscsi/Makefile | 6 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 36 +-
drivers/scsi/ibmvscsi/ibmvfc.h | 4 +-
drivers/scsi/ibmvscsi/ibmvscsi.c | 352 +++++-
drivers/scsi/ibmvscsi/ibmvscsi.h | 22 -
drivers/scsi/ibmvscsi/rpa_vscsi.c | 368 ------
drivers/scsi/ipr.c | 234 ++--
drivers/scsi/ipr.h | 5 +-
drivers/scsi/isci/host.c | 24 +-
drivers/scsi/isci/host.h | 2 +-
drivers/scsi/isci/init.c | 59 +-
drivers/scsi/isci/phy.c | 4 +-
drivers/scsi/isci/probe_roms.c | 1 -
drivers/scsi/isci/remote_node_context.h | 2 +-
drivers/scsi/iscsi_tcp.c | 2 +-
drivers/scsi/libsas/sas_ata.c | 91 +-
drivers/scsi/libsas/sas_discover.c | 69 +-
drivers/scsi/libsas/sas_dump.c | 1 +
drivers/scsi/libsas/sas_event.c | 4 +-
drivers/scsi/libsas/sas_init.c | 90 +-
drivers/scsi/libsas/sas_internal.h | 1 +
drivers/scsi/libsas/sas_phy.c | 21 +
drivers/scsi/libsas/sas_port.c | 52 +-
drivers/scsi/lpfc/lpfc.h | 6 +-
drivers/scsi/lpfc/lpfc_attr.c | 76 +-
drivers/scsi/lpfc/lpfc_bsg.c | 8 +-
drivers/scsi/lpfc/lpfc_crtn.h | 6 +-
drivers/scsi/lpfc/lpfc_ct.c | 16 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 494 ++++----
drivers/scsi/lpfc/lpfc_debugfs.h | 72 +-
drivers/scsi/lpfc/lpfc_disc.h | 10 +-
drivers/scsi/lpfc/lpfc_els.c | 186 +++-
drivers/scsi/lpfc/lpfc_hbadisc.c | 98 +-
drivers/scsi/lpfc/lpfc_hw.h | 18 +-
drivers/scsi/lpfc/lpfc_hw4.h | 42 +-
drivers/scsi/lpfc/lpfc_init.c | 839 +++++++-------
drivers/scsi/lpfc/lpfc_mbox.c | 38 +-
drivers/scsi/lpfc/lpfc_mem.c | 6 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 127 +++
drivers/scsi/lpfc/lpfc_scsi.c | 144 ++-
drivers/scsi/lpfc/lpfc_sli.c | 621 ++++++-----
drivers/scsi/lpfc/lpfc_sli.h | 42 +-
drivers/scsi/lpfc/lpfc_sli4.h | 63 +-
drivers/scsi/lpfc/lpfc_version.h | 7 +-
drivers/scsi/megaraid/megaraid_sas.h | 8 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 39 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 12 +-
drivers/scsi/mpt2sas/Kconfig | 2 +-
drivers/scsi/mpt2sas/mpi/mpi2.h | 14 +-
drivers/scsi/mpt2sas/mpi/mpi2_init.h | 9 +-
drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 8 +-
drivers/scsi/mpt2sas/mpi/mpi2_raid.h | 7 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 6 +-
drivers/scsi/mpt2sas/mpt2sas_base.h | 14 +-
drivers/scsi/mpt2sas/mpt2sas_config.c | 38 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 80 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_debug.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 59 +-
drivers/scsi/mpt2sas/mpt2sas_transport.c | 2 +-
drivers/scsi/mvsas/mv_sas.c | 2 +-
drivers/scsi/qla2xxx/qla_attr.c | 147 ++-
drivers/scsi/qla2xxx/qla_bsg.c | 376 ++++++-
drivers/scsi/qla2xxx/qla_bsg.h | 30 +-
drivers/scsi/qla2xxx/qla_dbg.c | 29 +-
drivers/scsi/qla2xxx/qla_dbg.h | 2 +-
drivers/scsi/qla2xxx/qla_def.h | 166 ++-
drivers/scsi/qla2xxx/qla_dfs.c | 2 +-
drivers/scsi/qla2xxx/qla_fw.h | 49 +-
drivers/scsi/qla2xxx/qla_gbl.h | 39 +-
drivers/scsi/qla2xxx/qla_gs.c | 4 +-
drivers/scsi/qla2xxx/qla_init.c | 565 ++++++++--
drivers/scsi/qla2xxx/qla_inline.h | 28 +-
drivers/scsi/qla2xxx/qla_iocb.c | 261 ++++-
drivers/scsi/qla2xxx/qla_isr.c | 437 +++++++-
drivers/scsi/qla2xxx/qla_mbx.c | 224 +++-
drivers/scsi/qla2xxx/qla_mid.c | 5 +-
drivers/scsi/qla2xxx/qla_nx.c | 153 +--
drivers/scsi/qla2xxx/qla_nx.h | 17 +-
drivers/scsi/qla2xxx/qla_os.c | 770 ++++++++++++-
drivers/scsi/qla2xxx/qla_settings.h | 2 +-
drivers/scsi/qla2xxx/qla_sup.c | 67 +-
drivers/scsi/qla2xxx/qla_version.h | 6 +-
drivers/scsi/qla4xxx/Kconfig | 4 +-
drivers/scsi/qla4xxx/Makefile | 2 +-
drivers/scsi/qla4xxx/ql4_83xx.c | 1611 +++++++++++++++++++++++++++
drivers/scsi/qla4xxx/ql4_83xx.h | 283 +++++
drivers/scsi/qla4xxx/ql4_attr.c | 26 +-
drivers/scsi/qla4xxx/ql4_dbg.c | 32 +-
drivers/scsi/qla4xxx/ql4_dbg.h | 2 +-
drivers/scsi/qla4xxx/ql4_def.h | 65 +-
drivers/scsi/qla4xxx/ql4_fw.h | 59 +-
drivers/scsi/qla4xxx/ql4_glbl.h | 94 +-
drivers/scsi/qla4xxx/ql4_init.c | 23 +-
drivers/scsi/qla4xxx/ql4_inline.h | 2 +-
drivers/scsi/qla4xxx/ql4_iocb.c | 28 +-
drivers/scsi/qla4xxx/ql4_isr.c | 406 +++++--
drivers/scsi/qla4xxx/ql4_mbx.c | 186 ++--
drivers/scsi/qla4xxx/ql4_nvram.c | 2 +-
drivers/scsi/qla4xxx/ql4_nvram.h | 2 +-
drivers/scsi/qla4xxx/ql4_nx.c | 1432 ++++++++++++++++--------
drivers/scsi/qla4xxx/ql4_nx.h | 198 ++--
drivers/scsi/qla4xxx/ql4_os.c | 494 +++++---
drivers/scsi/qla4xxx/ql4_version.h | 4 +-
drivers/scsi/scsi_debug.c | 30 +-
drivers/scsi/scsi_devinfo.c | 1 +
drivers/scsi/scsi_lib.c | 3 +-
drivers/scsi/scsi_scan.c | 3 +
drivers/scsi/scsi_sysfs.c | 30 +-
drivers/scsi/sd.c | 80 +-
drivers/scsi/sd.h | 2 +-
drivers/scsi/sd_dif.c | 25 +-
drivers/scsi/st.c | 416 +++----
drivers/scsi/st.h | 5 +-
include/linux/libata.h | 15 +-
include/linux/pci_ids.h | 1 +
include/scsi/libsas.h | 20 +-
include/scsi/sas_ata.h | 10 +
include/scsi/scsi_bsg_fc.h | 2 -
include/scsi/scsi_device.h | 4 +
include/scsi/scsi_devinfo.h | 1 +
include/scsi/scsi_host.h | 6 +
179 files changed, 13497 insertions(+), 4465 deletions(-)
delete mode 100644 drivers/scsi/ibmvscsi/rpa_vscsi.c
create mode 100644 drivers/scsi/qla4xxx/ql4_83xx.c
create mode 100644 drivers/scsi/qla4xxx/ql4_83xx.h

James





\
 
 \ /
  Last update: 2012-10-02 11:01    [W:0.041 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site