lkml.org 
[lkml]   [2012]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/9] Staging: winbond: wbusb: Fixed coding style issue
Date
Removed unnecessary printk and pr_debug tracing calls

Signed-off-by: Adil Mujeeb <mujeeb.adil@gmail.com>
---
linux-3.6-rc7/drivers/staging/winbond/wbusb.c | 14 --------------
1 files changed, 0 insertions(+), 14 deletions(-)

diff --git a/linux-3.6-rc7/drivers/staging/winbond/wbusb.c b/linux-3.6-rc7/drivers/staging/winbond/wbusb.c
index 0ca857a..a0497ea 100644
--- a/linux-3.6-rc7/drivers/staging/winbond/wbusb.c
+++ b/linux-3.6-rc7/drivers/staging/winbond/wbusb.c
@@ -79,18 +79,15 @@ static int wbsoft_add_interface(struct ieee80211_hw *dev,
static void wbsoft_remove_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif)
{
- printk("wbsoft_remove interface called\n");
}

static void wbsoft_stop(struct ieee80211_hw *hw)
{
- printk(KERN_INFO "%s called\n", __func__);
}

static int wbsoft_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
- printk(KERN_INFO "%s called\n", __func__);
return 0;
}

@@ -177,12 +174,9 @@ static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info
if (pHwData->SurpriseRemove)
return;

- printk("Going to channel: %d/%d\n", channel.band, channel.ChanNo);
-
RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */
pHwData->Channel = channel.ChanNo;
pHwData->band = channel.band;
- pr_debug("Set channel is %d, band =%d\n", pHwData->Channel, pHwData->band);
reg->M28_MacControl &= ~0xff; /* Clean channel information field */
reg->M28_MacControl |= channel.ChanNo;
Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl,
@@ -262,8 +256,6 @@ static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
struct wbsoft_priv *priv = dev->priv;
struct chan_info ch;

- printk("wbsoft_config called\n");
-
/* Should use channel_num, or something, as that is already pre-translated */
ch.band = 1;
ch.ChanNo = 1;
@@ -280,7 +272,6 @@ static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)

static u64 wbsoft_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif)
{
- printk("wbsoft_get_tsf called\n");
return 0;
}

@@ -714,7 +705,6 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
}

priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
- pr_debug("Driver init, antenna no = %d\n", priv->sLocalPara.bAntennaNo);
hal_get_hw_radio_off(pHwData);

/* Waiting for HAL setting OK */
@@ -780,9 +770,6 @@ static int wb35_probe(struct usb_interface *intf,
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;

- if (endpoint[2].wMaxPacketSize == 512)
- printk("[w35und] Working on USB 2.0\n");
-
err = wb35_hw_init(dev);
if (err)
goto error_free_hw;
@@ -834,7 +821,6 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
{
/* Turn off Rx and Tx hardware ability */
hal_stop(&adapter->sHwData);
- pr_debug("[w35und] Hal_stop O.K.\n");
/* Waiting Irp completed */
msleep(100);

--
1.7.7.3


\
 
 \ /
  Last update: 2012-10-12 19:22    [W:0.112 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site