lkml.org 
[lkml]   [2012]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] drm/i915: set AUD_CONFIG N_value_index for DisplayPort
It should be programmed to "0" for HDMI or "1" for DisplayPort.

This enables DisplayPort audio for

- HP EliteBook 8460p
(whose BIOS does not set the N_value_index bit for us)

- DisplayPort monitor hot plugged after boot
(otherwise most BIOS will fill the N_value_index bit for us)

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +++
drivers/gpu/drm/i915/intel_display.c | 5 +++++
2 files changed, 8 insertions(+)

--- linux.orig/drivers/gpu/drm/i915/i915_reg.h 2012-01-06 15:00:55.000000000 +0800
+++ linux/drivers/gpu/drm/i915/i915_reg.h 2012-01-06 15:04:10.000000000 +0800
@@ -3582,4 +3582,7 @@
#define CPT_AUD_CNTL_ST_A 0xE50B4
#define CPT_AUD_CNTRL_ST2 0xE50C0

+#define IBX_AUD_CONFIG_A 0xe2000
+#define CPT_AUD_CONFIG_A 0xe5000
+
#endif /* _I915_REG_H_ */
--- linux.orig/drivers/gpu/drm/i915/intel_display.c 2012-01-06 15:05:47.000000000 +0800
+++ linux/drivers/gpu/drm/i915/intel_display.c 2012-01-06 16:07:59.000000000 +0800
@@ -5908,15 +5908,18 @@ static void ironlake_write_eld(struct dr
uint32_t i;
int len;
int hdmiw_hdmiedid;
+ int aud_config;
int aud_cntl_st;
int aud_cntrl_st2;

if (HAS_PCH_IBX(connector->dev)) {
hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
+ aud_config = IBX_AUD_CONFIG_A;
aud_cntl_st = IBX_AUD_CNTL_ST_A;
aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
} else {
hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
+ aud_config = CPT_AUD_CONFIG_A;
aud_cntl_st = CPT_AUD_CNTL_ST_A;
aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
}
@@ -5924,6 +5927,7 @@ static void ironlake_write_eld(struct dr
i = to_intel_crtc(crtc)->pipe;
hdmiw_hdmiedid += i * 0x100;
aud_cntl_st += i * 0x100;
+ aud_config += i * 0x100;

DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));

@@ -5943,6 +5947,7 @@ static void ironlake_write_eld(struct dr
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
+ I915_WRITE(aud_config, 1 << 29); /* N value index, 0x1 = DP */
}

if (intel_eld_uptodate(connector,

\
 
 \ /
  Last update: 2012-01-09 14:59    [W:1.128 / U:2.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site