lkml.org 
[lkml]   [2012]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] fs: Invalidate the cache for a parent block-device if fsync() is called for a partition
On 01/26/2012 10:03 AM, Andrew Morton wrote:
> I suggest a viro cc on this one.
>
> On Mon, 23 Jan 2012 10:38:29 +0000 Niels de Vos <ndevos@redhat.com> wrote:
>
>> Executing an fsync() on a file-descriptor of a partition flushes the
>> caches for that partition by calling blkdev_issue_flush(). However, it
>
> The changelog is stale.

Hmm, looks like it. I'll update it and send out a corrected patch soon.

>> seems that reading data through the parent device will still return the
>> old cached data.
>>
>> The cache for the block-device is not synced if the block-device is kept
>> open (due to a mounted partition, for example). Only when all users for
>> the disk have exited, the cache for the disk is made consistent again.
>>
>> Calling invalidate_bdev() on the parent block-device in case
>> blkdev_fsync() was called for a partition, fixes this.
>>
>> The problem can be worked around by forcing the caches to be flushed
>> with either
>> # blockdev --flushbufs ${dev_disk}
>> or
>> # echo 3 > /proc/sys/vm/drop_caches
>
> Please include your (useful) problem description in the changelog:
>
> : The problem that was noticed is the following:
> : 1) create two or more partitions on a device
> : - use fdisk to create /dev/sdb1 and /dev/sdb2
> : 2) format and mount one of the partition
> : - mkfs -t ext3 /dev/sdb1
> : 3) read through the main device to have something in the cache
> : - read /dev/sdb with dd or use something like "parted /dev/sdb print"
> : 4) now write something to /dev/sdb2, format the partition for example
> : - mkfs -t ext3 /dev/sdb2
> : 5) read the blocks where sdb2 starts, through /dev/sdb
> : - use dd or do again a "parted /dev/sdb print"
> :
> : Without this patch, calling "blockdev --flushbufs" or dropping the
> : caches, the result in 5) is the same as in 3). Reading the same area
> : through /dev/sdb2 shows the inconsistancy between the two caches.
> :
> : With this patch, or one of the workarounds, the data read through
> : /dev/sdb and /dev/sdb2 is the same.

I'll include this too.

>>
>> ...
>>
>> --- a/fs/block_dev.c
>> +++ b/fs/block_dev.c
>> @@ -424,6 +424,10 @@ int blkdev_fsync(struct file *filp, loff_t start, loff_t end, int datasync)
>> if (error == -EOPNOTSUPP)
>> error = 0;
>>
>> + /* invalidate parent block_device */
>> + if (!error && bdev != bdev->bd_contains)
>> + invalidate_bdev(bdev->bd_contains);
>> +
>> return error;
>> }
>
> It doesn't seem terribly logical to do this in blkdev_fsync(). Why not
> do it right there in blkdev_ioctl()'s "case BLKFLSBUF"?

Most userspace tools do not call the blkdev_ioctl(), but only do a
fsync(). Therefore it does not help existing tools if we update that
calling path. I agree it seems more logical to make the change there,
but it is out of scope for the use-cases I have seen until now.

> Bear in mind that invalidate_bdev() isn't a very strong function -
> it won't drop pages which are dirty or under writeback nor pages which
> others have a reference on. But I can see that this change would be a
> best-effort user-convenience thing.

It is only intended to refresh the read caches. The writeback path
should not be affected.

Thanks for the feedback,
Niels


\
 
 \ /
  Last update: 2012-01-26 12:55    [W:0.111 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site