lkml.org 
[lkml]   [2012]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RFC 07/14] irq_domain: Move irq_domain code from powerpc to kernel/irq
    Date
    This patch only moves the code.  It doesn't make any changes, and the
    code is still only compiled for powerpc. Follow-on patches will generalize
    the code for other architectures.

    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
    Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
    ---
    arch/powerpc/Kconfig | 1 +
    arch/powerpc/include/asm/irq.h | 144 ----------
    arch/powerpc/kernel/irq.c | 495 ---------------------------------
    include/linux/irqdomain.h | 46 +++-
    kernel/irq/irqdomain.c | 588 ++++++++++++++++++++++++++++++++++++++++
    5 files changed, 631 insertions(+), 643 deletions(-)

    diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
    index 48ab0bb..fcbf0f0 100644
    --- a/arch/powerpc/Kconfig
    +++ b/arch/powerpc/Kconfig
    @@ -135,6 +135,7 @@ config PPC
    select HAVE_GENERIC_HARDIRQS
    select HAVE_SPARSE_IRQ
    select IRQ_PER_CPU
    + select IRQ_DOMAIN
    select GENERIC_IRQ_SHOW
    select GENERIC_IRQ_SHOW_LEVEL
    select IRQ_FORCED_THREADING
    diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
    index f80f262..728cc30 100644
    --- a/arch/powerpc/include/asm/irq.h
    +++ b/arch/powerpc/include/asm/irq.h
    @@ -42,155 +42,11 @@ extern atomic_t ppc_n_lost_interrupts;
    /* Same thing, used by the generic IRQ code */
    #define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS

    -/*
    - * The host code and data structures are fairly agnostic to the fact that
    - * we use an open firmware device-tree. We do have references to struct
    - * device_node in two places: in irq_find_host() to find the host matching
    - * a given interrupt controller node, and of course as an argument to its
    - * counterpart host->ops->match() callback. However, those are treated as
    - * generic pointers by the core and the fact that it's actually a device-node
    - * pointer is purely a convention between callers and implementation. This
    - * code could thus be used on other architectures by replacing those two
    - * by some sort of arch-specific void * "token" used to identify interrupt
    - * controllers.
    - */
    -
    struct irq_data;
    extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
    extern irq_hw_number_t virq_to_hw(unsigned int virq);

    /**
    - * irq_alloc_host - Allocate a new irq_domain data structure
    - * @of_node: optional device-tree node of the interrupt controller
    - * @revmap_type: type of reverse mapping to use
    - * @revmap_arg: for IRQ_DOMAIN_MAP_LINEAR linear only: size of the map
    - * @ops: map/unmap host callbacks
    - * @inval_irq: provide a hw number in that host space that is always invalid
    - *
    - * Allocates and initialize and irq_domain structure. Note that in the case of
    - * IRQ_DOMAIN_MAP_LEGACY, the map() callback will be called before this returns
    - * for all legacy interrupts except 0 (which is always the invalid irq for
    - * a legacy controller). For a IRQ_DOMAIN_MAP_LINEAR, the map is allocated by
    - * this call as well. For a IRQ_DOMAIN_MAP_TREE, the radix tree will be allocated
    - * later during boot automatically (the reverse mapping will use the slow path
    - * until that happens).
    - */
    -extern struct irq_domain *irq_alloc_host(struct device_node *of_node,
    - unsigned int revmap_type,
    - unsigned int revmap_arg,
    - struct irq_domain_ops *ops,
    - irq_hw_number_t inval_irq);
    -
    -
    -/**
    - * irq_find_host - Locates a host for a given device node
    - * @node: device-tree node of the interrupt controller
    - */
    -extern struct irq_domain *irq_find_host(struct device_node *node);
    -
    -
    -/**
    - * irq_set_default_host - Set a "default" host
    - * @host: default host pointer
    - *
    - * For convenience, it's possible to set a "default" host that will be used
    - * whenever NULL is passed to irq_create_mapping(). It makes life easier for
    - * platforms that want to manipulate a few hard coded interrupt numbers that
    - * aren't properly represented in the device-tree.
    - */
    -extern void irq_set_default_host(struct irq_domain *host);
    -
    -
    -/**
    - * irq_set_virq_count - Set the maximum number of virt irqs
    - * @count: number of linux virtual irqs, capped with NR_IRQS
    - *
    - * This is mainly for use by platforms like iSeries who want to program
    - * the virtual irq number in the controller to avoid the reverse mapping
    - */
    -extern void irq_set_virq_count(unsigned int count);
    -
    -
    -/**
    - * irq_create_mapping - Map a hardware interrupt into linux virq space
    - * @host: host owning this hardware interrupt or NULL for default host
    - * @hwirq: hardware irq number in that host space
    - *
    - * Only one mapping per hardware interrupt is permitted. Returns a linux
    - * virq number.
    - * If the sense/trigger is to be specified, set_irq_type() should be called
    - * on the number returned from that call.
    - */
    -extern unsigned int irq_create_mapping(struct irq_domain *host,
    - irq_hw_number_t hwirq);
    -
    -
    -/**
    - * irq_dispose_mapping - Unmap an interrupt
    - * @virq: linux virq number of the interrupt to unmap
    - */
    -extern void irq_dispose_mapping(unsigned int virq);
    -
    -/**
    - * irq_find_mapping - Find a linux virq from an hw irq number.
    - * @host: host owning this hardware interrupt
    - * @hwirq: hardware irq number in that host space
    - *
    - * This is a slow path, for use by generic code. It's expected that an
    - * irq controller implementation directly calls the appropriate low level
    - * mapping function.
    - */
    -extern unsigned int irq_find_mapping(struct irq_domain *host,
    - irq_hw_number_t hwirq);
    -
    -/**
    - * irq_create_direct_mapping - Allocate a virq for direct mapping
    - * @host: host to allocate the virq for or NULL for default host
    - *
    - * This routine is used for irq controllers which can choose the hardware
    - * interrupt numbers they generate. In such a case it's simplest to use
    - * the linux virq as the hardware interrupt number.
    - */
    -extern unsigned int irq_create_direct_mapping(struct irq_domain *host);
    -
    -/**
    - * irq_radix_revmap_insert - Insert a hw irq to linux virq number mapping.
    - * @host: host owning this hardware interrupt
    - * @virq: linux irq number
    - * @hwirq: hardware irq number in that host space
    - *
    - * This is for use by irq controllers that use a radix tree reverse
    - * mapping for fast lookup.
    - */
    -extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq,
    - irq_hw_number_t hwirq);
    -
    -/**
    - * irq_radix_revmap_lookup - Find a linux virq from a hw irq number.
    - * @host: host owning this hardware interrupt
    - * @hwirq: hardware irq number in that host space
    - *
    - * This is a fast path, for use by irq controller code that uses radix tree
    - * revmaps
    - */
    -extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host,
    - irq_hw_number_t hwirq);
    -
    -/**
    - * irq_linear_revmap - Find a linux virq from a hw irq number.
    - * @host: host owning this hardware interrupt
    - * @hwirq: hardware irq number in that host space
    - *
    - * This is a fast path, for use by irq controller code that uses linear
    - * revmaps. It does fallback to the slow path if the revmap doesn't exist
    - * yet and will create the revmap entry with appropriate locking
    - */
    -
    -extern unsigned int irq_linear_revmap(struct irq_domain *host,
    - irq_hw_number_t hwirq);
    -
    -
    -/**
    * irq_early_init - Init irq remapping subsystem
    */
    extern void irq_early_init(void);
    diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
    index a15cf0a..e3673ff 100644
    --- a/arch/powerpc/kernel/irq.c
    +++ b/arch/powerpc/kernel/irq.c
    @@ -486,17 +486,6 @@ void do_softirq(void)
    local_irq_restore(flags);
    }

    -
    -/*
    - * IRQ controller and virtual interrupts
    - */
    -
    -static LIST_HEAD(irq_domain_list);
    -static DEFINE_MUTEX(irq_domain_mutex);
    -static DEFINE_MUTEX(revmap_trees_mutex);
    -static unsigned int irq_virq_count = NR_IRQS;
    -static struct irq_domain *irq_default_host;
    -
    irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
    {
    return d->hwirq;
    @@ -510,354 +499,6 @@ irq_hw_number_t virq_to_hw(unsigned int virq)
    }
    EXPORT_SYMBOL_GPL(virq_to_hw);

    -static int default_irq_host_match(struct irq_domain *h, struct device_node *np)
    -{
    - return h->of_node != NULL && h->of_node == np;
    -}
    -
    -struct irq_domain *irq_alloc_host(struct device_node *of_node,
    - unsigned int revmap_type,
    - unsigned int revmap_arg,
    - struct irq_domain_ops *ops,
    - irq_hw_number_t inval_irq)
    -{
    - struct irq_domain *host, *h;
    - unsigned int size = sizeof(struct irq_domain);
    - unsigned int i;
    - unsigned int *rmap;
    -
    - /* Allocate structure and revmap table if using linear mapping */
    - if (revmap_type == IRQ_DOMAIN_MAP_LINEAR)
    - size += revmap_arg * sizeof(unsigned int);
    - host = kzalloc(size, GFP_KERNEL);
    - if (host == NULL)
    - return NULL;
    -
    - /* Fill structure */
    - host->revmap_type = revmap_type;
    - host->inval_irq = inval_irq;
    - host->ops = ops;
    - host->of_node = of_node_get(of_node);
    -
    - if (host->ops->match == NULL)
    - host->ops->match = default_irq_host_match;
    -
    - mutex_lock(&irq_domain_mutex);
    - /* Make sure only one legacy controller can be created */
    - if (revmap_type == IRQ_DOMAIN_MAP_LEGACY) {
    - list_for_each_entry(h, &irq_domain_list, link) {
    - if (WARN_ON(h->revmap_type == IRQ_DOMAIN_MAP_LEGACY)) {
    - mutex_unlock(&irq_domain_mutex);
    - of_node_put(host->of_node);
    - kfree(host);
    - return NULL;
    - }
    - }
    - }
    - list_add(&host->link, &irq_domain_list);
    - mutex_unlock(&irq_domain_mutex);
    -
    - /* Additional setups per revmap type */
    - switch(revmap_type) {
    - case IRQ_DOMAIN_MAP_LEGACY:
    - /* 0 is always the invalid number for legacy */
    - host->inval_irq = 0;
    - /* setup us as the host for all legacy interrupts */
    - for (i = 1; i < NUM_ISA_INTERRUPTS; i++) {
    - struct irq_data *irq_data = irq_get_irq_data(i);
    - irq_data->hwirq = i;
    - irq_data->domain = host;
    -
    - /* Legacy flags are left to default at this point,
    - * one can then use irq_create_mapping() to
    - * explicitly change them
    - */
    - ops->map(host, i, i);
    -
    - /* Clear norequest flags */
    - irq_clear_status_flags(i, IRQ_NOREQUEST);
    - }
    - break;
    - case IRQ_DOMAIN_MAP_LINEAR:
    - rmap = (unsigned int *)(host + 1);
    - for (i = 0; i < revmap_arg; i++)
    - rmap[i] = NO_IRQ;
    - host->revmap_data.linear.size = revmap_arg;
    - host->revmap_data.linear.revmap = rmap;
    - break;
    - case IRQ_DOMAIN_MAP_TREE:
    - INIT_RADIX_TREE(&host->revmap_data.tree, GFP_KERNEL);
    - break;
    - default:
    - break;
    - }
    -
    - pr_debug("irq: Allocated host of type %d @0x%p\n", revmap_type, host);
    -
    - return host;
    -}
    -
    -struct irq_domain *irq_find_host(struct device_node *node)
    -{
    - struct irq_domain *h, *found = NULL;
    -
    - /* We might want to match the legacy controller last since
    - * it might potentially be set to match all interrupts in
    - * the absence of a device node. This isn't a problem so far
    - * yet though...
    - */
    - mutex_lock(&irq_domain_mutex);
    - list_for_each_entry(h, &irq_domain_list, link)
    - if (h->ops->match(h, node)) {
    - found = h;
    - break;
    - }
    - mutex_unlock(&irq_domain_mutex);
    - return found;
    -}
    -EXPORT_SYMBOL_GPL(irq_find_host);
    -
    -void irq_set_default_host(struct irq_domain *host)
    -{
    - pr_debug("irq: Default host set to @0x%p\n", host);
    -
    - irq_default_host = host;
    -}
    -
    -void irq_set_virq_count(unsigned int count)
    -{
    - pr_debug("irq: Trying to set virq count to %d\n", count);
    -
    - BUG_ON(count < NUM_ISA_INTERRUPTS);
    - if (count < NR_IRQS)
    - irq_virq_count = count;
    -}
    -
    -static int irq_setup_virq(struct irq_domain *host, unsigned int virq,
    - irq_hw_number_t hwirq)
    -{
    - struct irq_data *irq_data = irq_get_irq_data(virq);
    -
    - irq_data->hwirq = hwirq;
    - irq_data->domain = host;
    - if (host->ops->map(host, virq, hwirq)) {
    - pr_debug("irq: -> mapping failed, freeing\n");
    - irq_data->hwirq = 0;
    - irq_data->domain = NULL;
    - return -1;
    - }
    -
    - irq_clear_status_flags(virq, IRQ_NOREQUEST);
    -
    - return 0;
    -}
    -
    -unsigned int irq_create_direct_mapping(struct irq_domain *host)
    -{
    - unsigned int virq;
    -
    - if (host == NULL)
    - host = irq_default_host;
    -
    - BUG_ON(host == NULL);
    - WARN_ON(host->revmap_type != IRQ_DOMAIN_MAP_NOMAP);
    -
    - virq = irq_alloc_desc(0);
    - if (virq == NO_IRQ) {
    - pr_debug("irq: create_direct virq allocation failed\n");
    - return NO_IRQ;
    - }
    -
    - pr_debug("irq: create_direct obtained virq %d\n", virq);
    -
    - if (irq_setup_virq(host, virq, virq)) {
    - irq_free_desc(virq);
    - return NO_IRQ;
    - }
    -
    - return virq;
    -}
    -
    -unsigned int irq_create_mapping(struct irq_domain *host,
    - irq_hw_number_t hwirq)
    -{
    - unsigned int virq, hint;
    -
    - pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", host, hwirq);
    -
    - /* Look for default host if nececssary */
    - if (host == NULL)
    - host = irq_default_host;
    - if (host == NULL) {
    - printk(KERN_WARNING "irq_create_mapping called for"
    - " NULL host, hwirq=%lx\n", hwirq);
    - WARN_ON(1);
    - return NO_IRQ;
    - }
    - pr_debug("irq: -> using host @%p\n", host);
    -
    - /* Check if mapping already exists */
    - virq = irq_find_mapping(host, hwirq);
    - if (virq != NO_IRQ) {
    - pr_debug("irq: -> existing mapping on virq %d\n", virq);
    - return virq;
    - }
    -
    - /* Get a virtual interrupt number */
    - if (host->revmap_type == IRQ_DOMAIN_MAP_LEGACY) {
    - /* Handle legacy */
    - virq = (unsigned int)hwirq;
    - if (virq == 0 || virq >= NUM_ISA_INTERRUPTS)
    - return NO_IRQ;
    - return virq;
    - } else {
    - /* Allocate a virtual interrupt number */
    - hint = hwirq % irq_virq_count;
    - virq = irq_alloc_desc_from(hint, 0);
    - if (!virq)
    - virq = irq_alloc_desc(0);
    - if (virq == NO_IRQ) {
    - pr_debug("irq: -> virq allocation failed\n");
    - return NO_IRQ;
    - }
    - }
    -
    - if (irq_setup_virq(host, virq, hwirq)) {
    - if (host->revmap_type != IRQ_DOMAIN_MAP_LEGACY)
    - irq_free_desc(virq);
    - return NO_IRQ;
    - }
    -
    - pr_debug("irq: irq %lu on host %s mapped to virtual irq %u\n",
    - hwirq, host->of_node ? host->of_node->full_name : "null", virq);
    -
    - return virq;
    -}
    -EXPORT_SYMBOL_GPL(irq_create_mapping);
    -
    -unsigned int irq_create_of_mapping(struct device_node *controller,
    - const u32 *intspec, unsigned int intsize)
    -{
    - struct irq_domain *host;
    - irq_hw_number_t hwirq;
    - unsigned int type = IRQ_TYPE_NONE;
    - unsigned int virq;
    -
    - if (controller == NULL)
    - host = irq_default_host;
    - else
    - host = irq_find_host(controller);
    - if (host == NULL) {
    - printk(KERN_WARNING "irq: no irq host found for %s !\n",
    - controller->full_name);
    - return NO_IRQ;
    - }
    -
    - /* If host has no translation, then we assume interrupt line */
    - if (host->ops->xlate == NULL)
    - hwirq = intspec[0];
    - else {
    - if (host->ops->xlate(host, controller, intspec, intsize,
    - &hwirq, &type))
    - return NO_IRQ;
    - }
    -
    - /* Create mapping */
    - virq = irq_create_mapping(host, hwirq);
    - if (virq == NO_IRQ)
    - return virq;
    -
    - /* Set type if specified and different than the current one */
    - if (type != IRQ_TYPE_NONE &&
    - type != (irqd_get_trigger_type(irq_get_irq_data(virq))))
    - irq_set_irq_type(virq, type);
    - return virq;
    -}
    -EXPORT_SYMBOL_GPL(irq_create_of_mapping);
    -
    -void irq_dispose_mapping(unsigned int virq)
    -{
    - struct irq_data *irq_data = irq_get_irq_data(virq);
    - struct irq_domain *host;
    - irq_hw_number_t hwirq;
    -
    - if (virq == NO_IRQ || !irq_data)
    - return;
    -
    - host = irq_data->domain;
    - if (WARN_ON(host == NULL))
    - return;
    -
    - /* Never unmap legacy interrupts */
    - if (host->revmap_type == IRQ_DOMAIN_MAP_LEGACY)
    - return;
    -
    - irq_set_status_flags(virq, IRQ_NOREQUEST);
    -
    - /* remove chip and handler */
    - irq_set_chip_and_handler(virq, NULL, NULL);
    -
    - /* Make sure it's completed */
    - synchronize_irq(virq);
    -
    - /* Tell the PIC about it */
    - if (host->ops->unmap)
    - host->ops->unmap(host, virq);
    - smp_mb();
    -
    - /* Clear reverse map */
    - hwirq = irq_data->hwirq;
    - switch(host->revmap_type) {
    - case IRQ_DOMAIN_MAP_LINEAR:
    - if (hwirq < host->revmap_data.linear.size)
    - host->revmap_data.linear.revmap[hwirq] = NO_IRQ;
    - break;
    - case IRQ_DOMAIN_MAP_TREE:
    - mutex_lock(&revmap_trees_mutex);
    - radix_tree_delete(&host->revmap_data.tree, hwirq);
    - mutex_unlock(&revmap_trees_mutex);
    - break;
    - }
    -
    - /* Destroy map */
    - irq_data->hwirq = host->inval_irq;
    -
    - irq_free_desc(virq);
    -}
    -EXPORT_SYMBOL_GPL(irq_dispose_mapping);
    -
    -unsigned int irq_find_mapping(struct irq_domain *host,
    - irq_hw_number_t hwirq)
    -{
    - unsigned int i;
    - unsigned int hint = hwirq % irq_virq_count;
    -
    - /* Look for default host if nececssary */
    - if (host == NULL)
    - host = irq_default_host;
    - if (host == NULL)
    - return NO_IRQ;
    -
    - /* legacy -> bail early */
    - if (host->revmap_type == IRQ_DOMAIN_MAP_LEGACY)
    - return hwirq;
    -
    - /* Slow path does a linear search of the map */
    - if (hint < NUM_ISA_INTERRUPTS)
    - hint = NUM_ISA_INTERRUPTS;
    - i = hint;
    - do {
    - struct irq_data *data = irq_get_irq_data(i);
    - if (data && (data->domain == host) && (data->hwirq == hwirq))
    - return i;
    - i++;
    - if (i >= irq_virq_count)
    - i = NUM_ISA_INTERRUPTS;
    - } while(i != hint);
    - return NO_IRQ;
    -}
    -EXPORT_SYMBOL_GPL(irq_find_mapping);
    -
    #ifdef CONFIG_SMP
    int irq_choose_cpu(const struct cpumask *mask)
    {
    @@ -894,147 +535,11 @@ int irq_choose_cpu(const struct cpumask *mask)
    }
    #endif

    -unsigned int irq_radix_revmap_lookup(struct irq_domain *host,
    - irq_hw_number_t hwirq)
    -{
    - struct irq_data *irq_data;
    -
    - if (WARN_ON_ONCE(host->revmap_type != IRQ_DOMAIN_MAP_TREE))
    - return irq_find_mapping(host, hwirq);
    -
    - /*
    - * Freeing an irq can delete nodes along the path to
    - * do the lookup via call_rcu.
    - */
    - rcu_read_lock();
    - irq_data = radix_tree_lookup(&host->revmap_data.tree, hwirq);
    - rcu_read_unlock();
    -
    - /*
    - * If found in radix tree, then fine.
    - * Else fallback to linear lookup - this should not happen in practice
    - * as it means that we failed to insert the node in the radix tree.
    - */
    - return irq_data ? irq_data->irq : irq_find_mapping(host, hwirq);
    -}
    -
    -void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq,
    - irq_hw_number_t hwirq)
    -{
    - struct irq_data *irq_data = irq_get_irq_data(virq);
    -
    - if (WARN_ON(host->revmap_type != IRQ_DOMAIN_MAP_TREE))
    - return;
    -
    - if (virq != NO_IRQ) {
    - mutex_lock(&revmap_trees_mutex);
    - radix_tree_insert(&host->revmap_data.tree, hwirq, irq_data);
    - mutex_unlock(&revmap_trees_mutex);
    - }
    -}
    -
    -unsigned int irq_linear_revmap(struct irq_domain *host,
    - irq_hw_number_t hwirq)
    -{
    - unsigned int *revmap;
    -
    - if (WARN_ON_ONCE(host->revmap_type != IRQ_DOMAIN_MAP_LINEAR))
    - return irq_find_mapping(host, hwirq);
    -
    - /* Check revmap bounds */
    - if (unlikely(hwirq >= host->revmap_data.linear.size))
    - return irq_find_mapping(host, hwirq);
    -
    - /* Check if revmap was allocated */
    - revmap = host->revmap_data.linear.revmap;
    - if (unlikely(revmap == NULL))
    - return irq_find_mapping(host, hwirq);
    -
    - /* Fill up revmap with slow path if no mapping found */
    - if (unlikely(revmap[hwirq] == NO_IRQ))
    - revmap[hwirq] = irq_find_mapping(host, hwirq);
    -
    - return revmap[hwirq];
    -}
    -
    int arch_early_irq_init(void)
    {
    return 0;
    }

    -#ifdef CONFIG_VIRQ_DEBUG
    -static int virq_debug_show(struct seq_file *m, void *private)
    -{
    - unsigned long flags;
    - struct irq_desc *desc;
    - const char *p;
    - static const char none[] = "none";
    - void *data;
    - int i;
    -
    - seq_printf(m, "%-5s %-7s %-15s %-18s %s\n", "virq", "hwirq",
    - "chip name", "chip data", "host name");
    -
    - for (i = 1; i < nr_irqs; i++) {
    - desc = irq_to_desc(i);
    - if (!desc)
    - continue;
    -
    - raw_spin_lock_irqsave(&desc->lock, flags);
    -
    - if (desc->action && desc->action->handler) {
    - struct irq_data *irq_data = irq_desc_get_data(desc);
    - struct irq_chip *chip;
    -
    - seq_printf(m, "%5d ", i);
    - seq_printf(m, "0x%05lx ", irq_data->hwirq);
    -
    - chip = irq_desc_get_chip(desc);
    - if (chip && chip->name)
    - p = chip->name;
    - else
    - p = none;
    - seq_printf(m, "%-15s ", p);
    -
    - data = irq_desc_get_chip_data(desc);
    - seq_printf(m, "0x%16p ", data);
    -
    - if (irq_data->domain.of_node)
    - p = irq_data->domain.of_node->full_name;
    - else
    - p = none;
    - seq_printf(m, "%s\n", p);
    - }
    -
    - raw_spin_unlock_irqrestore(&desc->lock, flags);
    - }
    -
    - return 0;
    -}
    -
    -static int virq_debug_open(struct inode *inode, struct file *file)
    -{
    - return single_open(file, virq_debug_show, inode->i_private);
    -}
    -
    -static const struct file_operations virq_debug_fops = {
    - .open = virq_debug_open,
    - .read = seq_read,
    - .llseek = seq_lseek,
    - .release = single_release,
    -};
    -
    -static int __init irq_debugfs_init(void)
    -{
    - if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root,
    - NULL, &virq_debug_fops) == NULL)
    - return -ENOMEM;
    -
    - return 0;
    -}
    -__initcall(irq_debugfs_init);
    -#endif /* CONFIG_VIRQ_DEBUG */
    -
    #ifdef CONFIG_PPC64
    static int __init setup_noirqdistrib(char *str)
    {
    diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
    index 35b9ff3..18f4ab0 100644
    --- a/include/linux/irqdomain.h
    +++ b/include/linux/irqdomain.h
    @@ -16,6 +16,17 @@
    * (though a domain can cover more than one PIC if they have a flat number
    * model). It's the domain callbacks that are responsible for setting the
    * irq_chip on a given irq_desc after it's been mapped.
    + *
    + * The host code and data structures are agnostic to whether or not
    + * we use an open firmware device-tree. We do have references to struct
    + * device_node in two places: in irq_find_host() to find the host matching
    + * a given interrupt controller node, and of course as an argument to its
    + * counterpart domain->ops->match() callback. However, those are treated as
    + * generic pointers by the core and the fact that it's actually a device-node
    + * pointer is purely a convention between callers and implementation. This
    + * code could thus be used on other architectures by replacing those two
    + * by some sort of arch-specific void * "token" used to identify interrupt
    + * controllers.
    */

    #ifndef _LINUX_IRQDOMAIN_H
    @@ -108,6 +119,32 @@ struct irq_domain {
    };

    #ifdef CONFIG_IRQ_DOMAIN
    +#ifdef CONFIG_PPC
    +extern struct irq_domain *irq_alloc_host(struct device_node *of_node,
    + unsigned int revmap_type,
    + unsigned int revmap_arg,
    + struct irq_domain_ops *ops,
    + irq_hw_number_t inval_irq);
    +extern struct irq_domain *irq_find_host(struct device_node *node);
    +extern void irq_set_default_host(struct irq_domain *host);
    +extern void irq_set_virq_count(unsigned int count);
    +
    +
    +extern unsigned int irq_create_mapping(struct irq_domain *host,
    + irq_hw_number_t hwirq);
    +extern void irq_dispose_mapping(unsigned int virq);
    +extern unsigned int irq_find_mapping(struct irq_domain *host,
    + irq_hw_number_t hwirq);
    +extern unsigned int irq_create_direct_mapping(struct irq_domain *host);
    +extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq,
    + irq_hw_number_t hwirq);
    +extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host,
    + irq_hw_number_t hwirq);
    +extern unsigned int irq_linear_revmap(struct irq_domain *host,
    + irq_hw_number_t hwirq);
    +
    +#else /* CONFIG_PPC */
    +
    /**
    * irq_domain_to_irq() - Translate from a hardware irq to a linux irq number
    *
    @@ -137,15 +174,16 @@ extern void irq_domain_add(struct irq_domain *domain);
    extern void irq_domain_del(struct irq_domain *domain);

    extern struct irq_domain_ops irq_domain_simple_ops;
    -#endif /* CONFIG_IRQ_DOMAIN */

    -#if defined(CONFIG_IRQ_DOMAIN) && defined(CONFIG_OF_IRQ)
    +#if defined(CONFIG_OF_IRQ)
    extern void irq_domain_add_simple(struct device_node *controller, int irq_base);
    extern void irq_domain_generate_simple(const struct of_device_id *match,
    u64 phys_base, unsigned int irq_start);
    -#else /* CONFIG_IRQ_DOMAIN && CONFIG_OF_IRQ */
    +#else /* CONFIG_OF_IRQ */
    static inline void irq_domain_generate_simple(const struct of_device_id *match,
    u64 phys_base, unsigned int irq_start) { }
    -#endif /* CONFIG_IRQ_DOMAIN && CONFIG_OF_IRQ */
    +#endif /* !CONFIG_OF_IRQ */
    +#endif /* !CONFIG_PPC */
    +#endif /* CONFIG_IRQ_DOMAIN */

    #endif /* _LINUX_IRQDOMAIN_H */
    diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
    index 509adb8..b59482a 100644
    --- a/kernel/irq/irqdomain.c
    +++ b/kernel/irq/irqdomain.c
    @@ -1,3 +1,4 @@
    +#include <linux/hardirq.h>
    #include <linux/irq.h>
    #include <linux/irqdomain.h>
    #include <linux/module.h>
    @@ -5,10 +6,595 @@
    #include <linux/of.h>
    #include <linux/of_address.h>
    #include <linux/slab.h>
    +#include <linux/smp.h>

    static LIST_HEAD(irq_domain_list);
    static DEFINE_MUTEX(irq_domain_mutex);

    +#ifdef CONFIG_PPC
    +static DEFINE_MUTEX(revmap_trees_mutex);
    +static unsigned int irq_virq_count = NR_IRQS;
    +static struct irq_domain *irq_default_host;
    +
    +static int default_irq_host_match(struct irq_domain *h, struct device_node *np)
    +{
    + return h->of_node != NULL && h->of_node == np;
    +}
    +
    +/**
    + * irq_alloc_host() - Allocate a new irq_domain data structure
    + * @of_node: optional device-tree node of the interrupt controller
    + * @revmap_type: type of reverse mapping to use
    + * @revmap_arg: for IRQ_DOMAIN_MAP_LINEAR linear only: size of the map
    + * @ops: map/unmap host callbacks
    + * @inval_irq: provide a hw number in that host space that is always invalid
    + *
    + * Allocates and initialize and irq_domain structure. Note that in the case of
    + * IRQ_DOMAIN_MAP_LEGACY, the map() callback will be called before this returns
    + * for all legacy interrupts except 0 (which is always the invalid irq for
    + * a legacy controller). For a IRQ_DOMAIN_MAP_LINEAR, the map is allocated by
    + * this call as well. For a IRQ_DOMAIN_MAP_TREE, the radix tree will be
    + * allocated later during boot automatically (the reverse mapping will use the
    + * slow path until that happens).
    + */
    +struct irq_domain *irq_alloc_host(struct device_node *of_node,
    + unsigned int revmap_type,
    + unsigned int revmap_arg,
    + struct irq_domain_ops *ops,
    + irq_hw_number_t inval_irq)
    +{
    + struct irq_domain *host, *h;
    + unsigned int size = sizeof(struct irq_domain);
    + unsigned int i;
    + unsigned int *rmap;
    +
    + /* Allocate structure and revmap table if using linear mapping */
    + if (revmap_type == IRQ_DOMAIN_MAP_LINEAR)
    + size += revmap_arg * sizeof(unsigned int);
    + host = kzalloc(size, GFP_KERNEL);
    + if (host == NULL)
    + return NULL;
    +
    + /* Fill structure */
    + host->revmap_type = revmap_type;
    + host->inval_irq = inval_irq;
    + host->ops = ops;
    + host->of_node = of_node_get(of_node);
    +
    + if (host->ops->match == NULL)
    + host->ops->match = default_irq_host_match;
    +
    + mutex_lock(&irq_domain_mutex);
    + /* Make sure only one legacy controller can be created */
    + if (revmap_type == IRQ_DOMAIN_MAP_LEGACY) {
    + list_for_each_entry(h, &irq_domain_list, link) {
    + if (WARN_ON(h->revmap_type == IRQ_DOMAIN_MAP_LEGACY)) {
    + mutex_unlock(&irq_domain_mutex);
    + of_node_put(host->of_node);
    + kfree(host);
    + return NULL;
    + }
    + }
    + }
    + list_add(&host->link, &irq_domain_list);
    + mutex_unlock(&irq_domain_mutex);
    +
    + /* Additional setups per revmap type */
    + switch(revmap_type) {
    + case IRQ_DOMAIN_MAP_LEGACY:
    + /* 0 is always the invalid number for legacy */
    + host->inval_irq = 0;
    + /* setup us as the host for all legacy interrupts */
    + for (i = 1; i < NUM_ISA_INTERRUPTS; i++) {
    + struct irq_data *irq_data = irq_get_irq_data(i);
    + irq_data->hwirq = i;
    + irq_data->domain = host;
    +
    + /* Legacy flags are left to default at this point,
    + * one can then use irq_create_mapping() to
    + * explicitly change them
    + */
    + ops->map(host, i, i);
    +
    + /* Clear norequest flags */
    + irq_clear_status_flags(i, IRQ_NOREQUEST);
    + }
    + break;
    + case IRQ_DOMAIN_MAP_LINEAR:
    + rmap = (unsigned int *)(host + 1);
    + for (i = 0; i < revmap_arg; i++)
    + rmap[i] = NO_IRQ;
    + host->revmap_data.linear.size = revmap_arg;
    + host->revmap_data.linear.revmap = rmap;
    + break;
    + case IRQ_DOMAIN_MAP_TREE:
    + INIT_RADIX_TREE(&host->revmap_data.tree, GFP_KERNEL);
    + break;
    + default:
    + break;
    + }
    +
    + pr_debug("irq: Allocated host of type %d @0x%p\n", revmap_type, host);
    +
    + return host;
    +}
    +
    +/**
    + * irq_find_host() - Locates a domain for a given device node
    + * @node: device-tree node of the interrupt controller
    + */
    +struct irq_domain *irq_find_host(struct device_node *node)
    +{
    + struct irq_domain *h, *found = NULL;
    +
    + /* We might want to match the legacy controller last since
    + * it might potentially be set to match all interrupts in
    + * the absence of a device node. This isn't a problem so far
    + * yet though...
    + */
    + mutex_lock(&irq_domain_mutex);
    + list_for_each_entry(h, &irq_domain_list, link)
    + if (h->ops->match(h, node)) {
    + found = h;
    + break;
    + }
    + mutex_unlock(&irq_domain_mutex);
    + return found;
    +}
    +EXPORT_SYMBOL_GPL(irq_find_host);
    +
    +/**
    + * irq_set_default_host() - Set a "default" irq domain
    + * @host: default host pointer
    + *
    + * For convenience, it's possible to set a "default" domain that will be used
    + * whenever NULL is passed to irq_create_mapping(). It makes life easier for
    + * platforms that want to manipulate a few hard coded interrupt numbers that
    + * aren't properly represented in the device-tree.
    + */
    +void irq_set_default_host(struct irq_domain *host)
    +{
    + pr_debug("irq: Default host set to @0x%p\n", host);
    +
    + irq_default_host = host;
    +}
    +
    +/**
    + * irq_set_virq_count() - Set the maximum number of linux irqs
    + * @count: number of linux irqs, capped with NR_IRQS
    + *
    + * This is mainly for use by platforms like iSeries who want to program
    + * the virtual irq number in the controller to avoid the reverse mapping
    + */
    +void irq_set_virq_count(unsigned int count)
    +{
    + pr_debug("irq: Trying to set virq count to %d\n", count);
    +
    + BUG_ON(count < NUM_ISA_INTERRUPTS);
    + if (count < NR_IRQS)
    + irq_virq_count = count;
    +}
    +
    +static int irq_setup_virq(struct irq_domain *host, unsigned int virq,
    + irq_hw_number_t hwirq)
    +{
    + struct irq_data *irq_data = irq_get_irq_data(virq);
    +
    + irq_data->hwirq = hwirq;
    + irq_data->domain = host;
    + if (host->ops->map(host, virq, hwirq)) {
    + pr_debug("irq: -> mapping failed, freeing\n");
    + irq_data->hwirq = 0;
    + irq_data->domain = NULL;
    + return -1;
    + }
    +
    + irq_clear_status_flags(virq, IRQ_NOREQUEST);
    +
    + return 0;
    +}
    +
    +/**
    + * irq_create_direct_mapping() - Allocate an irq for direct mapping
    + * @host: domain to allocate the irq for or NULL for default host
    + *
    + * This routine is used for irq controllers which can choose the hardware
    + * interrupt numbers they generate. In such a case it's simplest to use
    + * the linux irq as the hardware interrupt number.
    + */
    +unsigned int irq_create_direct_mapping(struct irq_domain *host)
    +{
    + unsigned int virq;
    +
    + if (host == NULL)
    + host = irq_default_host;
    +
    + BUG_ON(host == NULL);
    + WARN_ON(host->revmap_type != IRQ_DOMAIN_MAP_NOMAP);
    +
    + virq = irq_alloc_desc(0);
    + if (virq == NO_IRQ) {
    + pr_debug("irq: create_direct virq allocation failed\n");
    + return NO_IRQ;
    + }
    +
    + pr_debug("irq: create_direct obtained virq %d\n", virq);
    +
    + if (irq_setup_virq(host, virq, virq)) {
    + irq_free_desc(virq);
    + return NO_IRQ;
    + }
    +
    + return virq;
    +}
    +
    +/**
    + * irq_create_mapping() - Map a hardware interrupt into linux irq space
    + * @host: host owning this hardware interrupt or NULL for default host
    + * @hwirq: hardware irq number in that host space
    + *
    + * Only one mapping per hardware interrupt is permitted. Returns a linux
    + * irq number.
    + * If the sense/trigger is to be specified, set_irq_type() should be called
    + * on the number returned from that call.
    + */
    +unsigned int irq_create_mapping(struct irq_domain *host,
    + irq_hw_number_t hwirq)
    +{
    + unsigned int virq, hint;
    +
    + pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", host, hwirq);
    +
    + /* Look for default host if nececssary */
    + if (host == NULL)
    + host = irq_default_host;
    + if (host == NULL) {
    + printk(KERN_WARNING "irq_create_mapping called for"
    + " NULL host, hwirq=%lx\n", hwirq);
    + WARN_ON(1);
    + return NO_IRQ;
    + }
    + pr_debug("irq: -> using host @%p\n", host);
    +
    + /* Check if mapping already exists */
    + virq = irq_find_mapping(host, hwirq);
    + if (virq != NO_IRQ) {
    + pr_debug("irq: -> existing mapping on virq %d\n", virq);
    + return virq;
    + }
    +
    + /* Get a virtual interrupt number */
    + if (host->revmap_type == IRQ_DOMAIN_MAP_LEGACY) {
    + /* Handle legacy */
    + virq = (unsigned int)hwirq;
    + if (virq == 0 || virq >= NUM_ISA_INTERRUPTS)
    + return NO_IRQ;
    + return virq;
    + } else {
    + /* Allocate a virtual interrupt number */
    + hint = hwirq % irq_virq_count;
    + virq = irq_alloc_desc_from(hint, 0);
    + if (!virq)
    + virq = irq_alloc_desc(0);
    + if (virq == NO_IRQ) {
    + pr_debug("irq: -> virq allocation failed\n");
    + return NO_IRQ;
    + }
    + }
    +
    + if (irq_setup_virq(host, virq, hwirq)) {
    + if (host->revmap_type != IRQ_DOMAIN_MAP_LEGACY)
    + irq_free_desc(virq);
    + return NO_IRQ;
    + }
    +
    + pr_debug("irq: irq %lu on host %s mapped to virtual irq %u\n",
    + hwirq, host->of_node ? host->of_node->full_name : "null", virq);
    +
    + return virq;
    +}
    +EXPORT_SYMBOL_GPL(irq_create_mapping);
    +
    +unsigned int irq_create_of_mapping(struct device_node *controller,
    + const u32 *intspec, unsigned int intsize)
    +{
    + struct irq_domain *host;
    + irq_hw_number_t hwirq;
    + unsigned int type = IRQ_TYPE_NONE;
    + unsigned int virq;
    +
    + if (controller == NULL)
    + host = irq_default_host;
    + else
    + host = irq_find_host(controller);
    + if (host == NULL) {
    + printk(KERN_WARNING "irq: no irq host found for %s !\n",
    + controller->full_name);
    + return NO_IRQ;
    + }
    +
    + /* If host has no translation, then we assume interrupt line */
    + if (host->ops->xlate == NULL)
    + hwirq = intspec[0];
    + else {
    + if (host->ops->xlate(host, controller, intspec, intsize,
    + &hwirq, &type))
    + return NO_IRQ;
    + }
    +
    + /* Create mapping */
    + virq = irq_create_mapping(host, hwirq);
    + if (virq == NO_IRQ)
    + return virq;
    +
    + /* Set type if specified and different than the current one */
    + if (type != IRQ_TYPE_NONE &&
    + type != (irqd_get_trigger_type(irq_get_irq_data(virq))))
    + irq_set_irq_type(virq, type);
    + return virq;
    +}
    +EXPORT_SYMBOL_GPL(irq_create_of_mapping);
    +
    +/**
    + * irq_dispose_mapping() - Unmap an interrupt
    + * @virq: linux irq number of the interrupt to unmap
    + */
    +void irq_dispose_mapping(unsigned int virq)
    +{
    + struct irq_data *irq_data = irq_get_irq_data(virq);
    + struct irq_domain *host;
    + irq_hw_number_t hwirq;
    +
    + if (virq == NO_IRQ || !irq_data)
    + return;
    +
    + host = irq_data->domain;
    + if (WARN_ON(host == NULL))
    + return;
    +
    + /* Never unmap legacy interrupts */
    + if (host->revmap_type == IRQ_DOMAIN_MAP_LEGACY)
    + return;
    +
    + irq_set_status_flags(virq, IRQ_NOREQUEST);
    +
    + /* remove chip and handler */
    + irq_set_chip_and_handler(virq, NULL, NULL);
    +
    + /* Make sure it's completed */
    + synchronize_irq(virq);
    +
    + /* Tell the PIC about it */
    + if (host->ops->unmap)
    + host->ops->unmap(host, virq);
    + smp_mb();
    +
    + /* Clear reverse map */
    + hwirq = irq_data->hwirq;
    + switch(host->revmap_type) {
    + case IRQ_DOMAIN_MAP_LINEAR:
    + if (hwirq < host->revmap_data.linear.size)
    + host->revmap_data.linear.revmap[hwirq] = NO_IRQ;
    + break;
    + case IRQ_DOMAIN_MAP_TREE:
    + mutex_lock(&revmap_trees_mutex);
    + radix_tree_delete(&host->revmap_data.tree, hwirq);
    + mutex_unlock(&revmap_trees_mutex);
    + break;
    + }
    +
    + /* Destroy map */
    + irq_data->hwirq = host->inval_irq;
    +
    + irq_free_desc(virq);
    +}
    +EXPORT_SYMBOL_GPL(irq_dispose_mapping);
    +
    +/**
    + * irq_find_mapping() - Find a linux irq from an hw irq number.
    + * @host: domain owning this hardware interrupt
    + * @hwirq: hardware irq number in that host space
    + *
    + * This is a slow path, for use by generic code. It's expected that an
    + * irq controller implementation directly calls the appropriate low level
    + * mapping function.
    + */
    +unsigned int irq_find_mapping(struct irq_domain *host,
    + irq_hw_number_t hwirq)
    +{
    + unsigned int i;
    + unsigned int hint = hwirq % irq_virq_count;
    +
    + /* Look for default host if nececssary */
    + if (host == NULL)
    + host = irq_default_host;
    + if (host == NULL)
    + return NO_IRQ;
    +
    + /* legacy -> bail early */
    + if (host->revmap_type == IRQ_DOMAIN_MAP_LEGACY)
    + return hwirq;
    +
    + /* Slow path does a linear search of the map */
    + if (hint < NUM_ISA_INTERRUPTS)
    + hint = NUM_ISA_INTERRUPTS;
    + i = hint;
    + do {
    + struct irq_data *data = irq_get_irq_data(i);
    + if (data && (data->domain == host) && (data->hwirq == hwirq))
    + return i;
    + i++;
    + if (i >= irq_virq_count)
    + i = NUM_ISA_INTERRUPTS;
    + } while(i != hint);
    + return NO_IRQ;
    +}
    +EXPORT_SYMBOL_GPL(irq_find_mapping);
    +
    +/**
    + * irq_radix_revmap_lookup() - Find a linux irq from a hw irq number.
    + * @host: host owning this hardware interrupt
    + * @hwirq: hardware irq number in that host space
    + *
    + * This is a fast path, for use by irq controller code that uses radix tree
    + * revmaps
    + */
    +unsigned int irq_radix_revmap_lookup(struct irq_domain *host,
    + irq_hw_number_t hwirq)
    +{
    + struct irq_data *irq_data;
    +
    + if (WARN_ON_ONCE(host->revmap_type != IRQ_DOMAIN_MAP_TREE))
    + return irq_find_mapping(host, hwirq);
    +
    + /*
    + * Freeing an irq can delete nodes along the path to
    + * do the lookup via call_rcu.
    + */
    + rcu_read_lock();
    + irq_data = radix_tree_lookup(&host->revmap_data.tree, hwirq);
    + rcu_read_unlock();
    +
    + /*
    + * If found in radix tree, then fine.
    + * Else fallback to linear lookup - this should not happen in practice
    + * as it means that we failed to insert the node in the radix tree.
    + */
    + return irq_data ? irq_data->irq : irq_find_mapping(host, hwirq);
    +}
    +
    +/**
    + * irq_radix_revmap_insert() - Insert a hw irq to linux irq number mapping.
    + * @host: host owning this hardware interrupt
    + * @virq: linux irq number
    + * @hwirq: hardware irq number in that host space
    + *
    + * This is for use by irq controllers that use a radix tree reverse
    + * mapping for fast lookup.
    + */
    +void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq,
    + irq_hw_number_t hwirq)
    +{
    + struct irq_data *irq_data = irq_get_irq_data(virq);
    +
    + if (WARN_ON(host->revmap_type != IRQ_DOMAIN_MAP_TREE))
    + return;
    +
    + if (virq != NO_IRQ) {
    + mutex_lock(&revmap_trees_mutex);
    + radix_tree_insert(&host->revmap_data.tree, hwirq, irq_data);
    + mutex_unlock(&revmap_trees_mutex);
    + }
    +}
    +
    +/**
    + * irq_linear_revmap() - Find a linux irq from a hw irq number.
    + * @host: host owning this hardware interrupt
    + * @hwirq: hardware irq number in that host space
    + *
    + * This is a fast path, for use by irq controller code that uses linear
    + * revmaps. It does fallback to the slow path if the revmap doesn't exist
    + * yet and will create the revmap entry with appropriate locking
    + */
    +unsigned int irq_linear_revmap(struct irq_domain *host,
    + irq_hw_number_t hwirq)
    +{
    + unsigned int *revmap;
    +
    + if (WARN_ON_ONCE(host->revmap_type != IRQ_DOMAIN_MAP_LINEAR))
    + return irq_find_mapping(host, hwirq);
    +
    + /* Check revmap bounds */
    + if (unlikely(hwirq >= host->revmap_data.linear.size))
    + return irq_find_mapping(host, hwirq);
    +
    + /* Check if revmap was allocated */
    + revmap = host->revmap_data.linear.revmap;
    + if (unlikely(revmap == NULL))
    + return irq_find_mapping(host, hwirq);
    +
    + /* Fill up revmap with slow path if no mapping found */
    + if (unlikely(revmap[hwirq] == NO_IRQ))
    + revmap[hwirq] = irq_find_mapping(host, hwirq);
    +
    + return revmap[hwirq];
    +}
    +
    +#ifdef CONFIG_VIRQ_DEBUG
    +static int virq_debug_show(struct seq_file *m, void *private)
    +{
    + unsigned long flags;
    + struct irq_desc *desc;
    + const char *p;
    + static const char none[] = "none";
    + void *data;
    + int i;
    +
    + seq_printf(m, "%-5s %-7s %-15s %-18s %s\n", "virq", "hwirq",
    + "chip name", "chip data", "host name");
    +
    + for (i = 1; i < nr_irqs; i++) {
    + desc = irq_to_desc(i);
    + if (!desc)
    + continue;
    +
    + raw_spin_lock_irqsave(&desc->lock, flags);
    +
    + if (desc->action && desc->action->handler) {
    + struct irq_data *irq_data = irq_desc_get_data(desc);
    + struct irq_chip *chip;
    +
    + seq_printf(m, "%5d ", i);
    + seq_printf(m, "0x%05lx ", irq_data->hwirq);
    +
    + chip = irq_desc_get_chip(desc);
    + if (chip && chip->name)
    + p = chip->name;
    + else
    + p = none;
    + seq_printf(m, "%-15s ", p);
    +
    + data = irq_desc_get_chip_data(desc);
    + seq_printf(m, "0x%16p ", data);
    +
    + if (irq_data->domain.of_node)
    + p = irq_data->domain.of_node->full_name;
    + else
    + p = none;
    + seq_printf(m, "%s\n", p);
    + }
    +
    + raw_spin_unlock_irqrestore(&desc->lock, flags);
    + }
    +
    + return 0;
    +}
    +
    +static int virq_debug_open(struct inode *inode, struct file *file)
    +{
    + return single_open(file, virq_debug_show, inode->i_private);
    +}
    +
    +static const struct file_operations virq_debug_fops = {
    + .open = virq_debug_open,
    + .read = seq_read,
    + .llseek = seq_lseek,
    + .release = single_release,
    +};
    +
    +static int __init irq_debugfs_init(void)
    +{
    + if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root,
    + NULL, &virq_debug_fops) == NULL)
    + return -ENOMEM;
    +
    + return 0;
    +}
    +__initcall(irq_debugfs_init);
    +#endif /* CONFIG_VIRQ_DEBUG */
    +
    +#else /* CONFIG_PPC */
    +
    /**
    * irq_domain_add() - Register an irq_domain
    * @domain: ptr to initialized irq_domain structure
    @@ -185,3 +771,5 @@ struct irq_domain_ops irq_domain_simple_ops = {
    #endif /* CONFIG_OF_IRQ */
    };
    EXPORT_SYMBOL_GPL(irq_domain_simple_ops);
    +
    +#endif /* !CONFIG_PPC */
    --
    1.7.5.4


    \
     
     \ /
      Last update: 2012-01-11 21:29    [W:5.941 / U:0.148 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site