lkml.org 
[lkml]   [2011]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] pata_sis: mark most const data static as well
Date
This pushes timing and other values into preinitialized read-only data
sections rather than being inlined into the code. None of these
functions are called more than a handful of times, so reducing code size
makes sense.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
---
drivers/ata/pata_sis.c | 20 ++++++++++----------
1 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index a42668b..d886b0b 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -231,8 +231,8 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
u8 t1, t2;
int speed = adev->pio_mode - XFER_PIO_0;

- const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
- const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
+ static const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
+ static const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };

sis_set_fifo(ap, adev);

@@ -267,7 +267,7 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
int port = sis_old_port_base(adev);
int speed = adev->pio_mode - XFER_PIO_0;

- const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
+ static const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };

sis_set_fifo(ap, adev);

@@ -293,14 +293,14 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
u32 t1;
int speed = adev->pio_mode - XFER_PIO_0;

- const u32 timing133[] = {
+ static const u32 timing133[] = {
0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */
0x0C266000,
0x04263000,
0x0C0A3000,
0x05093000
};
- const u32 timing100[] = {
+ static const u32 timing100[] = {
0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */
0x091C4000,
0x031C2000,
@@ -341,8 +341,8 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
int drive_pci = sis_old_port_base(adev);
u16 timing;

- const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
- const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
+ static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+ static const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };

pci_read_config_word(pdev, drive_pci, &timing);

@@ -381,8 +381,8 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
u16 timing;

/* MWDMA 0-2 and UDMA 0-5 */
- const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
- const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
+ static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+ static const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };

pci_read_config_word(pdev, drive_pci, &timing);

@@ -419,7 +419,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
int drive_pci = sis_old_port_base(adev);
u8 timing;

- const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
+ static const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};

pci_read_config_byte(pdev, drive_pci + 1, &timing);

--
1.7.6.1


\
 
 \ /
  Last update: 2011-09-07 18:35    [W:0.042 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site