lkml.org 
[lkml]   [2011]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [GIT] Bcache version 12
From
On Fri, Sep 30, 2011 at 12:14 AM, Kent Overstreet
<kent.overstreet@gmail.com> wrote:
>> > Cache devices have a basically identical superblock as backing devices
>> > though, and some of the registration code is shared, but cache devices
>> > don't correspond to any block devices.
>>
>> Just like a raid0 is a virtual creation from two block devices?  Or
>> some other meaning of "don't correspond"?
>
> No.
>
> Remember, you can hang multiple backing devices off a cache.
>
> Each backing device shows up as as a new block device - i.e. if you're
> caching /dev/sdb, you now use it as /dev/bcache0.
>
> But the SSD doesn't belong to any of those /dev/bcacheN devices.

So to clarify I read that as "it belongs to all of them". The ssd
(/dev/sda, for example) can cache the contents of N block devices, and
to get to the cached version of each of those you go through
/dev/bcache[0..N]. The problem you perceive is that an md device
requires a 1:1 mapping of member devices to md devices. So if we had
/dev/sda and /dev/sdb in a cache configuration (/dev/md0) your concern
is that if we simultaneously wanted a /dev/md1 that caches /dev/sda
and /dev/sdc that md would not be able to handle it.

Is that the right interpretation?

I assume /dev/sda in the example would have some bcache-logical
partitions to delineate the /dev/sdb and /dev/sdc cache data? Which
sounds similar to the logical partitions md handles now for external
metadata. I'm not proposing that cache-state metadata could be
handled in userspace it's too integral to the i/o path, just pointing
out that having /dev/sda be a member of both /dev/md0 and /dev/md1 is
possible.

>> > A cache set is a set of cache devices - i.e. SSDs. The primary
>> > motivitation for cache sets (as distinct from just caches) is to have
>> > the ability to mirror only dirty data, and not clean data.
>> >
>> > i.e. if you're doing writeback caching of a raid6, your ssd is now a
>> > single point of failure. You could use raid1 SSDs, but most of the data
>> > in the cache is clean, so you don't need to mirror that... just the
>> > dirty data.
>>
>> ...but you only incur that "mirror clean data" penalty once, and then
>> it's just a normal raid1 mirroring writes, right?
>
> No idea what you mean...

/dev/md1 is a slow raid5 and /dev/md0 is a raid1 of two ssds. Once
/dev/md0 is synced the only mirror traffic is for incoming
cache-dirtying writes and cache-clean read allocations. We agree
about incoming dirty-data, but you are saying you don't want to mirror
read allocations?

>> See, if these things were just md devices multiple cache device would
>> already be "done", or at least on its way by just stacking md devices.
>>  Where "done" is probably an oversimplification.
>
> No, it really wouldn't save us anything. If all we wanted to do was
> mirror everything, there'd be no point in implementing multiple cache
> device support, and you'd just use bcache on top of md. We're
> implementing something completely new!
>
> You read what I said about only mirroring dirty data... right?

I did but I guess I did not fully grok it.

>> >> In any case it certainly could be modelled in md - and if the modelling were
>> >> not elegant (e.g. even device numbers for backing devices, odd device numbers
>> >> for cache devices) we could "fix" md to make it more elegant.
>> >
>> > But we've no reason to create block devices for caches or have a 1:1
>> > mapping - that'd be a serious step backwards in functionality.
>>
>> I don't follow that...  there's nothing that prevents having multiple
>> superblocks per cache array.
>
> Multiple... superblocks? Do you mean partitioning up the cache, or do
> you mean creating multiple block devices for a cache? Either way it's a
> silly hack.
>
>> A couple reasons I'm probing the md angle.
>>
>> 1/ Since the backing devices are md devices it would be nice if all
>> the user space assembly logic that has seeped into udev and dracut
>> could be re-used for assembling bcache devices.  As it stands it seems
>> bcache relies on in-kernel auto-assembly, which md has discouraged
>> with the v1 superblock.
>
> md was doing in kernel probing, which bcache does not do. What bcache is
> doing is centralizing all the code that touches the on disk
> superblock/metadata. You want to change something in the superblock -
> you just have to tell the kernel to do it for you. Otherwise not only
> would there be duplication of code, it'd be impossible to do safely
> without races or the userspace code screwing something up; only the
> kernel knows and controls the state of everything.

Makes sense but there is a difference between the metadata that
specifies the configuration and the metadata that tracks the state of
the cache. If that distinction is made then userspace can tell the
kernel to run a block cache of blockdevA and blockdevB and the kernel
only needs to handle the cache state metadata.

> Or do you expect the ext4 superblock to be managed in normal operation
> by userspace tools?

No.

>> We even have nascent GUI support in
>> gnome-disk-utility it would be nice to harness some of that enabling
>> momentum for this.
>
> I've got nothing against standardizing the userspace interfaces to make
> life easier for things like gnome-disk-utility. Tell me what you want
> and if it's sane I'll see about implementing it.

That's the point, userspace has some knowledge of how to interrogate
and manage md devices. A bcache device is brand new... maybe for good
reason but that's what I'm trying to understand.

>> 2/ md supports multiple superblock formats and if you Google "ssd
>> caching" you'll see that there may be other superblock formats that
>> the Linux block-caching driver could be asked to support down the
>> road.  And wouldn't it be nice if bcache had at least the option to
>> support the on-disk format of whatever dm-cache is doing?
>
> That's pure fantasy. That's like expecting the ext4 code to mount a ntfs
> filesystem!

No, there's portions of what bcache does that are similar to what md
does. Do we need to invent new multiple-device handling
infrastructure for a block device driver? But we are quickly
approaching the "show me the code" portion of this discussion, so I
need to go do more reading of bcache.

> There's a lot more to bcache's metadata than a superblock, there's a
> journal and a full b-tree. A cache is going to need an index of some
> kind.

Yes, but that can be independent of the configuration metadata.

--
Dan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-09-30 21:49    [W:0.761 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site