lkml.org 
[lkml]   [2011]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/21] drm/i915: Enable eDP panel power during I2C initialization sequence
Date
The DP i2c initialization code does a couple of i2c transactions,
which means that an eDP panel must be powered up.

Signed-off-by: Keith Packard <keithp@keithp.com>
---
drivers/gpu/drm/i915/intel_dp.c | 10 +++++++++-
1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 9829581..414aef7 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -595,10 +595,15 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
return -EREMOTEIO;
}

+static void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp);
+static void ironlake_edp_panel_vdd_off(struct intel_dp *intel_dp);
+
static int
intel_dp_i2c_init(struct intel_dp *intel_dp,
struct intel_connector *intel_connector, const char *name)
{
+ int ret;
+
DRM_DEBUG_KMS("i2c_init %s\n", name);
intel_dp->algo.running = false;
intel_dp->algo.address = 0;
@@ -612,7 +617,10 @@ intel_dp_i2c_init(struct intel_dp *intel_dp,
intel_dp->adapter.algo_data = &intel_dp->algo;
intel_dp->adapter.dev.parent = &intel_connector->base.kdev;

- return i2c_dp_aux_add_bus(&intel_dp->adapter);
+ ironlake_edp_panel_vdd_on(intel_dp);
+ ret = i2c_dp_aux_add_bus(&intel_dp->adapter);
+ ironlake_edp_panel_vdd_off(intel_dp);
+ return ret;
}

static bool
--
1.7.6.3


\
 
 \ /
  Last update: 2011-09-30 03:13    [W:0.309 / U:2.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site