[lkml]   [2011]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2] ACPI S3 to work under Xen.
Attached is an [v2] set of patches to enable S3 to work with the Xen hypervisor.

Changes since the RFC posting [] by
Liang Tang:
- Per review comments added: __unused__ attribute, support for PM1A/B if more than 16-bit,
- Added support for PHYSDEVOP_restore_msi_ext call.

The relationship that Xen has with Linux kernel is symbiotic. The Linux
kernel does the ACPI "stuff" and tells the hypervisor to do the low-level
stuff (such as program the IOAPIC, setup vectors, etc). The realm of
ACPI S3 is more complex as we need to save the CPU state (and Intel TXT
values - which the hypervisor has to do).

The major difficulties we hit was with 'acpi_suspend_lowlevel' - which tweaks
a lot of lowlevel values and some of them are not properly handled by Xen.
Liang Tang has figured which ones of them we trip over (read below) - and he
suggested that perhaps we can provide a registration mechanism to abstract
this away. The reason for all of this is that Linux does not talk to the
BIOS directly - instead it simply walks through the necessary ACPI methods
and then issues hypercall to Xen which then further completes the remaining
suspend steps.

So the attached patches do exactly that - there are two entry points
in the ACPI.

1). For S3: acpi_suspend_lowlevel -> .. lots of code -> acpi_enter_sleep_state
2). For S1/S4/S5: acpi_enter_sleep_state

The first naive idea was of abstracting away in the 'acpi_enter_sleep_state'
function the tboot_sleep code so that we can use it too. And low-behold - it
worked splendidly for powering off (S5 I believe)

For S3 that did not work - during suspend the hypervisor tripped over when
saving cr8. During resume it tripped over at restoring the cr3, cr8, idt,
and gdt values.

When I posted the RFC, the feedback I got was to use a higher upper interface
to make the call to the hypervisor. Instead of doing it at the lower pv-ops
case for cr3, cr8, idt, gdt, etc. The code I've to say - is much nicer than
doing it via pv-ops.

Anyhow, please take a look!

Konrad Rzeszutek Wilk (5):
x86: Expand the x86_msi_ops to have a restore MSIs.
x86, acpi, tboot: Have a ACPI sleep override instead of calling tboot_sleep.
xen: Utilize the restore_msi_irqs hook.
xen/acpi/sleep: Enable ACPI sleep via the __acpi_override_sleep
xen/acpi/sleep: Register to the acpi_suspend_lowlevel a callback.

Liang Tang (2):
x86/acpi/sleep: Provide registration for acpi_suspend_lowlevel.
xen/pci:use hypercall PHYSDEVOP_restore_msi_ext to restore MSI/MSI-X vectors

Yu Ke (1):
xen/acpi: Domain0 acpi parser related platform hypercall

arch/ia64/include/asm/xen/interface.h | 1 +
arch/x86/include/asm/acpi.h | 6 +-
arch/x86/include/asm/pci.h | 9 +
arch/x86/include/asm/x86_init.h | 1 +
arch/x86/include/asm/xen/hypercall.h | 8 +
arch/x86/include/asm/xen/interface.h | 1 +
arch/x86/kernel/acpi/boot.c | 6 +
arch/x86/kernel/acpi/sleep.c | 4 +-
arch/x86/kernel/acpi/sleep.h | 2 +
arch/x86/kernel/tboot.c | 14 +-
arch/x86/kernel/x86_init.c | 1 +
arch/x86/pci/xen.c | 29 +++
arch/x86/xen/enlighten.c | 3 +
drivers/acpi/acpica/hwsleep.c | 12 +-
drivers/acpi/sleep.c | 2 +
drivers/pci/msi.c | 29 +++-
drivers/xen/Makefile | 2 +-
drivers/xen/acpi.c | 65 +++++++
include/linux/tboot.h | 3 +-
include/xen/acpi.h | 70 +++++++
include/xen/interface/physdev.h | 15 ++
include/xen/interface/platform.h | 320 +++++++++++++++++++++++++++++++++
include/xen/interface/xen.h | 1 +
23 files changed, 591 insertions(+), 13 deletions(-)

 \ /
  Last update: 2011-09-29 22:23    [W:0.064 / U:2.940 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site