Messages in this thread | | | Date | Tue, 27 Sep 2011 09:05:12 +0900 | From | Tomoya MORINAGA <> | Subject | Re: [PATCH 3/7] i2c-eg20t: delete 10bit access processing |
| |
(2011/09/23 2:49), Jeffrey (Sheng-Hui) Chu wrote: > The device is BCM20791. Please contact Aaron Smith (aarons@broadcom.com) for evaluation. Though googling the device, I can't find the device. Broadcom website too.
> > By the way, the existing handling of 10-bit address in the patch you intended to delete does not work. You'll need to fix that before you can test with the device successfully. > > For the write operation, it's a easy fix: > > @@ -410,25 +408,16 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap, > } > > if (msgs->flags& I2C_M_TEN) { > - addr_2_msb = ((addr& I2C_MSB_2B_MSK)>> 7); > + addr_2_msb = ((addr& I2C_MSB_2B_MSK)>> 7)& 0x06; > > > For the read operation, static s32 pch_i2c_readbytes(), you'll need to do a write followed by a restart and a read... please refer to the i2c spec... > > Regards,
Thank you for your indication. We will update this after supporting 10bit access.
Thanks, tomoya
| |