lkml.org 
[lkml]   [2011]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: linux-next-20110923: warning kernel/rcutree.c:1833
On Mon, Sep 26, 2011 at 10:49:53AM +0200, Frederic Weisbecker wrote:
> On Sun, Sep 25, 2011 at 06:25:01PM -0700, Paul E. McKenney wrote:
> > On Mon, Sep 26, 2011 at 03:04:21AM +0200, Frederic Weisbecker wrote:
> > > On Sun, Sep 25, 2011 at 09:48:04AM -0700, Paul E. McKenney wrote:
> > > > On Sun, Sep 25, 2011 at 03:06:25PM +0200, Frederic Weisbecker wrote:
> > > > > On Sun, Sep 25, 2011 at 02:26:37PM +0300, Kirill A. Shutemov wrote:
> > > > > > On Sat, Sep 24, 2011 at 10:08:26PM -0700, Paul E. McKenney wrote:
> > > > > > > On Sun, Sep 25, 2011 at 03:24:09AM +0300, Kirill A. Shutemov wrote:
> > > > > > > > [ 29.974288] ------------[ cut here ]------------
> > > > > > > > [ 29.974308] WARNING: at /home/kas/git/public/linux-next/kernel/rcutree.c:1833 rcu_needs_cpu+0xff
> > > > > > > > [ 29.974316] Hardware name: HP EliteBook 8440p
> > > > > > > > [ 29.974321] Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iple_mangle xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc rfcomm bnep acpi_cpufreq mperfckd fscache auth_rpcgss nfs_acl sunrpc ext2 loop kvm_intel kvm snd_hda_codec_hdmi snd_hda_codec_idtideodev media v4l2_compat_ioctl32 snd_seq bluetooth drm_kms_helper snd_timer tpm_infineon snd_seq_drt tpm_tis hp_accel intel_ips soundcore lis3lv02d tpm rfkill i2c_algo_bit snd_page_alloc i2c_core c16 sha256_generic aesni_intel cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod sg sr_mod sd_mod cd thermal_sys [last unloaded: scsi_wait_scan]
> > > > > > > > [ 29.974517] Pid: 0, comm: kworker/0:1 Not tainted 3.1.0-rc7-next-20110923 #2
> > > > > > > > [ 29.974521] Call Trace:
> > > > > > > > [ 29.974525] <IRQ> [<ffffffff8104d72a>] warn_slowpath_common+0x7a/0xb0
> > > > > > > > [ 29.974540] [<ffffffff8104d775>] warn_slowpath_null+0x15/0x20
> > > > > > > > [ 29.974546] [<ffffffff810bffdf>] rcu_needs_cpu+0xff/0x110
> > > > > > > > [ 29.974555] [<ffffffff8108396f>] tick_nohz_stop_sched_tick+0x13f/0x3d0
> > > > > > > > [ 29.974563] [<ffffffff814329c0>] ? notifier_call_chain+0x70/0x70
> > > > > > > > [ 29.974571] [<ffffffff81055622>] irq_exit+0xa2/0xd0
> > > > > > > > [ 29.974578] [<ffffffff8101ee75>] smp_apic_timer_interrupt+0x85/0x1c0
> > > > > > > > [ 29.974585] [<ffffffff814329c0>] ? notifier_call_chain+0x70/0x70
> > > > > > > > [ 29.974592] [<ffffffff81436e1e>] apic_timer_interrupt+0x6e/0x80
> > > > > > > > [ 29.974596] <EOI> [<ffffffff81297abd>] ? acpi_hw_read+0x4a/0x51
> > > > > > > > [ 29.974609] [<ffffffff81087a07>] ? lock_acquire+0xa7/0x160
> > > > > > > > [ 29.974615] [<ffffffff814329c0>] ? notifier_call_chain+0x70/0x70
> > > > > > > > [ 29.974622] [<ffffffff81432a16>] __atomic_notifier_call_chain+0x56/0xb0
> > > > > > > > [ 29.974631] [<ffffffff814329c0>] ? notifier_call_chain+0x70/0x70
> > > > > > > > [ 29.974642] [<ffffffff8130ebb6>] ? cpuidle_idle_call+0x106/0x350
> > > > > > > > [ 29.974651] [<ffffffff81432a81>] atomic_notifier_call_chain+0x11/0x20
> > > > > > > > [ 29.974661] [<ffffffff81001233>] cpu_idle+0xe3/0x120
> > > > > > > > [ 29.974672] [<ffffffff8141e34b>] start_secondary+0x1fd/0x204
> > > > > > > > [ 29.974681] ---[ end trace 6c1d44095a3bb7c5 ]---
> > > > > > >
> > > > > > > Do the following help?
> > > > > > >
> > > > > > > https://lkml.org/lkml/2011/9/17/47
> > > > > > > https://lkml.org/lkml/2011/9/17/45
> > > > > > > https://lkml.org/lkml/2011/9/17/43
> > > > > >
> > > > > > Yes. Thanks.
> > > > >
> > > > > I believe that doesn't really fix the issue. But the warning is not
> > > > > easy to trigger. You simply haven't hit it by chance after applying
> > > > > the patches.
> > > > >
> > > > > This happens when the idle notifier callchain is called in idle
> > > > > and is interrupted in the middle. So we have called rcu_read_lock()
> > > > > but haven't yet released with rcu_read_unlock(), and in the end
> > > > > of the interrupt we call tick_nohz_stop_sched_tick() -> rcu_needs_cpu()
> > > > > which is illegal while in an rcu read side critical section.
> > > > >
> > > > > No idea how to solve that. Any use of RCU after the tick gets stopped
> > > > > is concerned here. If it is really required that rcu_needs_cpu() can't
> > > > > be called in an rcu read side critical sectionn then it's not going
> > > > > to be easy to fix.
> > > > >
> > > > > But I don't really understand that requirement. rcu_needs_cpu() simply
> > > > > checks if we don't have callbacks to handle. So I don't understand how
> > > > > read side is concerned. It's rather the write side.
> > > > > The rule I can imagine instead is: don't call __call_rcu() once the tick is
> > > > > stopped.
> > > > >
> > > > > But I'm certainly missing something.
> > > > >
> > > > > Paul?
> > > >
> > > > This is required for RCU_FAST_NO_HZ, which checks to see whether the
> > > > current CPU can accelerate the current grace period so as to enter
> > > > dyntick-idle mode sooner than it would otherwise. This takes effect
> > > > in the situation where rcu_needs_cpu() sees that there are callbacks.
> > > > It then notes a quiescent state (which is illegal in an RCU read-side
> > > > critical section), calls force_quiescent_state(), and so on. For this
> > > > to work, the current CPU must be in an RCU read-side critical section.
> > >
> > > You mean it must *not* be in an RCU read-side critical section (ie: in a
> > > quiescent state)?
> >
> > Yes, you are right, it must -not- be in an RCU read-side critical section.
> >
> > > That assumption at least fails anytime in idle for the RCU
> > > sched flavour given that preemption is disabled in the idle loop.
> >
> > Except that the idle loop is a quiescent state.
> >
> > > > If this cannot be made to work, another option is to call a new RCU
> > > > function in the case where rcu_needs_cpu() returned false, but after
> > > > the RCU read-side critical section has exited.
> > >
> > > You mean when rcu_needs_cpu() returns true (when we have callbacks
> > > enqueued)?
> >
> > Yes. I definitely am having problems with polarity this weekend. :-/
> >
> > > > This new RCU function
> > > > could then attempt to rearrange RCU so as to allow the CPU to enter
> > > > dyntick-idle mode more quickly. It is more important for this to
> > > > happen when the CPU is going idle than when it is executing a user
> > > > process.
> > > >
> > > > So, is this doable?
> > >
> > > At least not when we have RCU sched callbacks enqueued, given preemption
> > > is disabled. But that sounds plausible in order to accelerate the switch
> > > to dyntick-idle mode when we only have rcu and/or rcu bh callbacks.
> >
> > Again, the idle loop is a quiescent state for RCU-sched.
>
> We need to add an idle_cpu() check in rcu_read_lock_sched_held()
> and rcu_read_lock_bh_held().

OK, but just to make sure... For this to work, the idle notifiers would
need to be invoked from outside of the idle task. If the idle notifiers
are instead invoked from idle-task context, then RCU needs to get more
precise about what it thinks of as "idle", probably via a per-CPU variable
that gets set and cleared within each idle loop.

/me reminisces about the time when the definition of "idle" seemed so
simple... ;-)

Thanx, Paul


\
 
 \ /
  Last update: 2011-09-27 00:33    [W:0.187 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site