lkml.org 
[lkml]   [2011]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH] x86_64: permit to configure ISA support also for x86_64 systems
    On 09/22/2011 04:20 PM, Arnd Bergmann wrote:
    > On Thursday 22 September 2011, Wolfgang Grandegger wrote:
    >> On 09/21/2011 11:24 AM, Arnd Bergmann wrote:
    >>> On Wednesday 21 September 2011 10:33:10 Wolfgang Grandegger wrote:
    >>> The other point is that you are probably using inb/outb operations,
    >>> which I'm trying to provide only on ISA/PCMCIA/PCI based systems in
    >>> the future. Once I finish that work, you will also need to depend on
    >>> HAS_IOPORT (which currently means something else).
    >>
    >> OK, the sja1000_isa driver just uses memory mapped access.
    >
    > According to this it uses both PIO and MMIO:
    >
    > $ git grep '\(in\|out\|read\|write\)\(b\|w\|l\)' drivers/net/can/sja1000/sja1000_isa.c
    > drivers/net/can/sja1000/sja1000_isa.c: return readb(priv->reg_base + reg);
    > drivers/net/can/sja1000/sja1000_isa.c: writeb(val, priv->reg_base + reg);
    > drivers/net/can/sja1000/sja1000_isa.c: return inb((unsigned long)priv->reg_base + reg);
    > drivers/net/can/sja1000/sja1000_isa.c: outb(val, (unsigned long)priv->reg_base + reg);
    > drivers/net/can/sja1000/sja1000_isa.c: outb(reg, base);
    > drivers/net/can/sja1000/sja1000_isa.c: return inb(base + 1);
    > drivers/net/can/sja1000/sja1000_isa.c: outb(reg, base);
    > drivers/net/can/sja1000/sja1000_isa.c: outb(val, base + 1);

    Ah, oh, I forgot. The driver supports both, I/O port and memory mapped
    access.

    > But don't worry about it, I'll make the right Kconfig annotation when I submit my
    > patches.

    OK,

    Wolfgang.


    \
     
     \ /
      Last update: 2011-09-22 16:59    [W:0.021 / U:92.880 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site