lkml.org 
[lkml]   [2011]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Re: Re: [PATCH 07/17] ASoC: twl6040: Lower the initial gains
Date
On Monday 19 September 2011 12:40:32 Mark Brown wrote:
> On Mon, Sep 19, 2011 at 02:26:31PM +0300, Péter Ujfalusi wrote:
> > Here in twl6040 we also have event handlers to do the ramp up/down on
> > the
> > gains. AFAIK some wm* codec have similar code.
>
> WM8350.

The implementation in twl6040 looks similar to the one in the wm8350 in
regards to the ramp code, and caching of the user configured gains.

If you take a look at the wm8350 driver it is also changing the L/R OUT 1/2
registers at probe time.
I don't see any difference in the two.
Also it seams that wm8350 has the same problem:
The default after the reset is 0x39 (0 dB)
In the wm8350 probe it is changed to 0x00 (-57dB)

The twl6040 already had the ramp up, and down code, but it was missing the
initialization part (IOW configuring the lowest gain on the outputs after
first power on).

We do have other scenarios covered, but this initialization was missing. This
resulted that the _first_ playback has pop noise, but all subsequent playbacks
were fine, since we had the runtime fix for this.

--
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-09-21 11:25    [W:0.078 / U:19.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site