lkml.org 
[lkml]   [2011]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 0/5] OMAP3EVM: Add support for MT9T111 sensor
    Date
    This patchset
    -adds support for MT9T111 sensor on omap3evm.
    Currently the sensor driver supports only
    VGA resolution.
    -enables MT9T111 sensor in omap2plus_defconfig.

    This is applied on top of the following patchset
    http://www.spinics.net/lists/linux-media/msg37270.html
    which adds YUYV input support for OMAP3ISP.
    ---

    Deepthy Ravi (2):
    ispccdc: Configure CCDC_SYN_MODE register for UYVY8_2X8 and
    YUYV8_2X8 formats
    omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers

    Vaibhav Hiremath (3):
    omap3evm: Enable regulators for camera interface
    [media] v4l: Add mt9t111 sensor driver
    omap3evm: Add Camera board init/hookup file

    arch/arm/configs/omap2plus_defconfig | 10 +
    arch/arm/mach-omap2/Makefile | 5 +
    arch/arm/mach-omap2/board-omap3evm-camera.c | 185 ++++
    arch/arm/mach-omap2/board-omap3evm.c | 25 +
    drivers/media/video/Kconfig | 7 +
    drivers/media/video/Makefile | 1 +
    drivers/media/video/mt9t111.c | 793 ++++++++++++++++
    drivers/media/video/mt9t111_reg.h | 1367 +++++++++++++++++++++++++++
    drivers/media/video/omap3isp/ispccdc.c | 11 +-
    include/media/mt9t111.h | 45 +
    10 files changed, 2446 insertions(+), 3 deletions(-)
    create mode 100644 arch/arm/mach-omap2/board-omap3evm-camera.c
    create mode 100644 drivers/media/video/mt9t111.c
    create mode 100644 drivers/media/video/mt9t111_reg.h
    create mode 100644 include/media/mt9t111.h



    \
     
     \ /
      Last update: 2011-09-20 16:59    [W:0.071 / U:0.872 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site