lkml.org 
[lkml]   [2011]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: [PATCH v2] dmaengine: add CSR SiRFprimaII DMAC driver
From
Date
On Mon, 2011-09-19 at 09:56 +0000, Barry Song wrote:
> > > > Not sure why you support this, there seem to be no DMA_SLAVE
> support in
> > > > this version ate least
> > >
> > > Not. I support dma_slave. But I have no prep_slave_sg function
> since I can
> > use the gen xfer to replace it.
> > Yes thats okay...
> >
> > Then I have questions on genxfer function...
> > where are you copying either src or dstn_start address, you seem to
> > completely ignore them?
>
> Since I only support memory->device or device ->memory, and channel
> number is fixed to every device. Then I actually don't care device
> address at all. Either src or dst is fixed to the device's address.
peripheral address can be fixed, not the memory, where do you copy the
memory address?
>
> >
> > Do you support only slave transfers or M2M as well for this driver?
> > If only slave you might want to check if dma_config_slave is set for
> > this channel or not.
>
> I support only slave transfer. Actually I have dma_config_slave. do
> you mean I need to check whether slave config cmd is really called
> before executing dma?
Yes


--
~Vinod



\
 
 \ /
  Last update: 2011-09-19 13:21    [W:0.078 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site