lkml.org 
[lkml]   [2011]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCHv4 00/19] First round in OTG rework
    On 09/12/11 15:12, Heikki Krogerus wrote:
    > Hi guys,
    >
    > On Wed, Sep 07, 2011 at 10:15:53AM +0300, Heikki Krogerus wrote:
    >> There were no comments in two weeks, so I'm dropping the RFC.
    >> Otherwise this is the same as the previous, no changes.
    >>
    >> Quick summary:
    >> This introduces struct usb_phy and struct usb_otg that
    >> replace struct otg_transceiver. The transceiver and phy
    >> members from struct otg_transceiver are left in struct
    >> usb_phy and otg specific members are moved to struct
    >> usb_otg.
    >>
    >> So the idea is simply to separate USB PHY handling from OTG.
    >>
    >> Heikki Krogerus (19):
    >> usb: otg: Rename otg_transceiver to usb_phy
    >> usb: otg: Rename usb_otg and usb_xceiv to usb_phy
    >> usb: otg: Separate otg members from usb_phy
    >> usb: otg: ab8500: Start using struct usb_otg
    >> usb: otg: fsl: Start using struct usb_otg
    >> usb: otg: gpio_vbus: Start using struct usb_otg
    >> usb: otg: isp1301_omap: Start using struct usb_otg
    >> usb: otg: msm: Start using struct usb_otg
    >> usb: otg: langwell: Start using struct usb_otg
    >> usb: otg: nop: Start using struct usb_otg
    >> usb: otg: twl4030: Start using struct usb_otg
    >> usb: otg: twl6030: Start using struct usb_otg
    >> usb: otg: ulpi: Start using struct usb_otg
    >> arm: imx: Start using struct usb_otg
    >> usb: musb: Start using struct usb_otg
    >> power_supply: Convert all users to new usb_phy
    >> usb: Convert all users to new usb_phy
    >> usb: otg: Remove OTG specific members from usb_phy
    >> usb: otg: Convert all users to pass struct usb_otg for OTG functions
    >
    > You guys are maintainers of the tranceiver/otg drivers. Can you test
    > these and ACK the patch for your driver if you feel there is nothing
    > wrong with these? I would much appreciate.
    >

    Currently, I cannot test this on my PXA3xx board, but I went through
    the patches and it looks fine.
    So,

    Acked-by: Igor Grinberg <grinberg@compulab.co.il>

    for:
    pxa3xx and drivers/usb/otg/ulpi.c

    Would be nice to have the Acked/Tested-by from iMX guys.

    --
    Regards,
    Igor.


    \
     
     \ /
      Last update: 2011-09-13 09:59    [W:0.026 / U:0.940 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site