lkml.org 
[lkml]   [2011]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 3/5] staging:iio:magnetometer:ak8975 Don't use irq_to_gpio()
Date
Tegra doesn't have irq_to_gpio() any more, and ak8975 is included in
tegra_defconfig. This causes a build failure.

Instead, obtain the GPIO ID corresponding to the chip's IRQ from the new
i2c_client field irq_gpio.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
drivers/staging/iio/magnetometer/ak8975.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index a17fa9f..14076da 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -477,7 +477,7 @@ static int ak8975_probe(struct i2c_client *client,
int err;

/* Grab and set up the supplied GPIO. */
- eoc_gpio = irq_to_gpio(client->irq);
+ eoc_gpio = client->irq_gpio;

/* We may not have a GPIO based IRQ to scan, that is fine, we will
poll if so */
--
1.7.0.4


\
 
 \ /
  Last update: 2011-09-02 00:09    [W:0.977 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site