lkml.org 
[lkml]   [2011]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH RFC] ata_piix: ignore disks in a hyper-v guest
On Wed, Aug 31, Olaf Hering wrote:

> After some more testing it looks like the hv_blkvsc driver claimed the
> ide major #3, so the ide_core could not bind to the emulated IDE
> hardware. The modprobe.conf rules prevented that ata_piix gets loaded.
> If I force a module load order of 'ata_piix ;hv_blkvsc' both ata_piix
> and hv_blkvsc will bind to the same drive, just as shown in my previous
> mail. So there is appearently no way to shutdown the IDE ports like it
> is done with xen_emul_unplug= option for Xen guests.
>
> Maybe some hack is needed for a hyper-v specific unplug if Windows does
> indeed lack that feature. Now that ata_piix is compiled into the kernel,
> there is nothing to a modprobe.conf rule can "fix".

Here is an attempt to ignore disks in a hyper-v disks, and let ata_piix
handle only the configured cdrom devices (iso of physical).
If the disks are not ignored, they will appear twice, once through
ata_piix and once through hv_storvsc.

Once hv_storvsc can also handle the configured cdrom devices, the added
piix_pata_read_id() function can be removed again. Only the check in
piix_init() or something similar needs to be done.

Maybe there is a better way enable only ATA_DEV_ATAPI?


Signed-off-by: Olaf Hering <olaf@aepfle.de>

---
drivers/ata/ata_piix.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)

--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -98,6 +98,10 @@
#define DRV_NAME "ata_piix"
#define DRV_VERSION "2.13"

+#if defined(CONFIG_HYPERV_STORAGE) || defined(CONFIG_HYPERV_STORAGE_MODULE)
+#define PIIX_IGNORE_ATA_ON_HYPERV 1
+#endif
+
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
ICH5_PMR = 0x90, /* port mapping register */
@@ -164,6 +168,7 @@ struct piix_host_priv {
static int piix_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
static void piix_remove_one(struct pci_dev *pdev);
+static unsigned int piix_pata_read_id(struct ata_device *adev, struct ata_taskfile *tf, u16 *id);
static int piix_pata_prereset(struct ata_link *link, unsigned long deadline);
static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
@@ -346,6 +351,7 @@ static struct ata_port_operations piix_p
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
.prereset = piix_pata_prereset,
+ .read_id = piix_pata_read_id,
};

static struct ata_port_operations piix_vmw_ops = {
@@ -619,6 +625,24 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
MODULE_VERSION(DRV_VERSION);

+#if defined(PIIX_IGNORE_ATA_ON_HYPERV)
+static int piix_msft_hyperv(void)
+{
+ static const struct dmi_system_id hv_dmi_ident[] = {
+ {
+ .ident = "Hyper-V",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+ DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
+ },
+ },
+ { } /* terminate list */
+ };
+ return !!dmi_check_system(hv_dmi_ident);
+}
+#endif
+
struct ich_laptop {
u16 device;
u16 subvendor;
@@ -702,6 +726,29 @@ static int piix_pata_prereset(struct ata
return ata_sff_prereset(link, deadline);
}

+/**
+ *
+ */
+static unsigned int piix_pata_read_id(struct ata_device *adev, struct ata_taskfile *tf, u16 *id)
+{
+ unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
+#if defined(PIIX_IGNORE_ATA_ON_HYPERV)
+ /*
+ * Ignore disks in a hyper-v guest.
+ * There is no unplug protocol like it is done with xen_emul_unplug= option.
+ * Emulate the unplug by ignoring disks when the hv_storvsc driver is enabled.
+ * If the disks are not ignored, they will appear twice: once through piix and once through hv_storvsc.
+ * Because hv_storvsc does not handle ATAPI devices, the piix driver is still required.
+ * Once hv_storvsc handles all devices, this function can be removed and the whole driver should be disabled in a hyper-v guest.
+ */
+ if (ata_id_is_ata(id) && piix_msft_hyperv()) {
+ ata_dev_printk(adev, KERN_WARNING, "ATA device ignored in Hyper-V guest\n");
+ id[ATA_ID_CONFIG] |= (1 << 15);
+ }
+#endif
+ return err_mask;
+}
+
static DEFINE_SPINLOCK(piix_lock);

/**
@@ -1679,6 +1726,13 @@ static int __init piix_init(void)
{
int rc;

+#if defined(PIIX_IGNORE_ATA_ON_HYPERV)
+ /* disabled until hv_storvsc drives also cdrom devices */
+ if (0 && piix_msft_hyperv()) {
+ printk(KERN_DEBUG "%s: hv_storvsc will bind to storage\n", __func__);
+ return -ENODEV;
+ }
+#endif
DPRINTK("pci_register_driver\n");
rc = pci_register_driver(&piix_pci_driver);
if (rc)

\
 
 \ /
  Last update: 2011-09-01 17:47    [W:0.105 / U:7.536 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site