lkml.org 
[lkml]   [2011]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [linux-pm] Crash when suspending Lenovo T510 laptop (2.6.39.3)
On Fri, 5 Aug 2011, Alan Stern wrote:

> On Fri, 5 Aug 2011, Rafael J. Wysocki wrote:
>
> > > You're right, sorry. System suspend was not involved, so the problem
> > > was triggerend by runtime suspend alone, resulting from unplugging the
> > > Ethernet cable.
> > >
> > > It looks like the crash started in pci_disable_msi().
> >
> > OTOH, I'm not sure how pci_legacy_suspend_late() was called.
> > In theory it is only called by the system suspend code and it surely
> > is not called for e1000e.
>
> The ? indicates that pci_legacy_suspend_late() wasn't necessarily on
> the task's call stack; it may simply have been a leftover pointer from
> some other operation, sitting somewhere in the middle of the stack
> page.
>

Not sure if it helps, but I've been trying to reproduce the crash and
although I've not succeeded doing that yet, I've got something else.

While trying to reproduce by unplugging/replugging ethernet and
resuming/suspending a lot I found the following in dmesg after one of the
resumes - the system seems to be working fine though and network works
as well, so it's not the same complete crash but it looks
potentially related :

[ 6564.921192] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100103, writing 0x100107)
[ 6564.921222] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[ 6564.921240] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2828000)
[ 6564.921247] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 6564.937545] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6564.937554] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6564.937708] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[ 6564.937805] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010b)
[ 6564.937815] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 6564.937820] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf250f250)
[ 6564.937824] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
[ 6564.937832] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 6564.937838] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 6564.937872] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[ 6564.937890] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2828400)
[ 6564.937897] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 6564.937915] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6564.937918] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6564.938019] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 6564.938085] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[ 6564.938107] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[ 6564.938674] PM: early resume of devices complete after 17.784 msecs[ 6564.939048] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6564.939053] iwlagn 0000:03:00.0: RF_KILL bit toggled to disable radio.
[ 6564.939118] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 6564.942219] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6564.942229] pci 0000:00:1e.0: setting latency timer to 64
[ 6564.942236] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6564.942246] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6564.942253] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6564.942261] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6564.942265] ahci 0000:00:1f.2: setting latency timer to 64
[ 6564.942276] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 6564.942344] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6564.942360] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6564.942436] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6564.942444] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6564.942452] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6564.942456] sd 0:0:0:0: [sda] Starting disk
[ 6564.942458] i915 0000:00:02.0: power state changed by ACPI to D0
[ 6564.942463] i915 0000:00:02.0: power state changed by ACPI to D0
[ 6564.942466] i915 0000:00:02.0: setting latency timer to 64
[ 6564.997449] firewire_ohci 0000:0d:00.3: irq 45 for MSI/MSI-X
[ 6564.997785] firewire_core: skipped bus generations, destroying all nodes
[ 6565.123881] usb 2-1.1: reset full speed USB device number 3 using ehci_hcd
[ 6565.256738] ata6: SATA link down (SStatus 0 SControl 300)
[ 6565.256782] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6565.259348] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 6565.259563] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 6565.263747] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 6565.263990] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 6565.265544] ata2.00: configured for UDMA/66
[ 6565.276723] ata5: SATA link down (SStatus 0 SControl 300)
[ 6565.439619] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 6565.439631] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 6565.463009] usb 1-1.2: reset low speed USB device number 3 using ehci_hcd
[ 6565.496163] firewire_core: rediscovered device fw0
[ 6565.802321] usb 1-1.3: reset full speed USB device number 4 using ehci_hcd
[ 6565.951782] usb 1-1.6: reset high speed USB device number 6 using ehci_hcd
[ 6566.014871] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6566.021871] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6566.021877] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6566.022178] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6566.022183] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6566.024813] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6566.024819] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6566.025080] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6566.025085] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6566.026327] ata1.00: configured for UDMA/100
[ 6566.104911] usb 2-1.1.4: reset full speed USB device number 4 using ehci_hcd
[ 6566.190354] PM: resume of devices complete after 1254.565 msecs
[ 6566.191321] PM: Finishing wakeup.
[ 6566.191323] Restarting tasks ... done.
[ 6566.199706] video LNXVIDEO:00: Restoring backlight state
[ 6566.661832] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[ 6566.661839] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 6566.662160] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6568.525731] e1000e 0000:00:19.0: PME# enabled
[ 6568.551863] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf2600000-0xf261ffff] (PCI address [0xf2600000-0xf261ffff])
[ 6568.551876] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf2625000-0xf2625fff] (PCI address [0xf2625000-0xf2625fff])
[ 6568.551886] e1000e 0000:00:19.0: BAR 2: set to [io 0x1820-0x183f] (PCI address [0x1820-0x183f])
[ 6568.551909] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 6568.551936] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 6568.551999] e1000e 0000:00:19.0: PME# disabled
[ 6568.645183] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 6568.698271] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 6568.699163] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6568.814811] e1000e 0000:00:19.0: PME# enabled
[ 6568.844535] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf2600000-0xf261ffff] (PCI address [0xf2600000-0xf261ffff])
[ 6568.844548] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf2625000-0xf2625fff] (PCI address [0xf2625000-0xf2625fff])
[ 6568.844558] e1000e 0000:00:19.0: BAR 2: set to [io 0x1820-0x183f] (PCI address [0x1820-0x183f])
[ 6568.844580] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 6568.844607] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 6568.844668] e1000e 0000:00:19.0: PME# disabled
[ 6568.937809] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 6568.990871] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 6568.991756] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6569.991674] ------------[ cut here ]------------
[ 6569.991694] WARNING: at drivers/net/e1000e/netdev.c:5221 __e1000_shutdown+0x43f/0x4c0 [e1000e]()
[ 6569.991698] Hardware name: 4384GJG
[ 6569.991699] Modules linked in: snd_seq snd_seq_device aesni_intel cryptd aes_x86_64 aes_generic ipv6 uvcvideo videodev media v4l2_compat_ioctl32 usbhid hid snd_hda_codec_hdmi btusb bluetooth snd_hda_codec_conexant arc4 ecb snd_hda_intel snd_hda_codec snd_hwdep e1000e i915 snd_pcm iwlagn ehci_hcd snd_timer drm_kms_helper usbcore snd_page_alloc sdhci_pci sdhci pcspkr mmc_core sg drm vboxnetadp vboxnetflt evdev tpm_tis i2c_algo_bit mac80211 serio_raw psmouse iTCO_wdt vboxdrv firewire_ohci firewire_core i2c_i801 crc_itu_t i2c_core iTCO_vendor_support cfg80211 battery thermal intel_ips wmi tpm intel_agp video ac tpm_bios button intel_gtt cpufreq_ondemand msr acpi_cpufreq freq_table processor mperf thinkpad_acpi rfkill snd soundcore nvram ext4 mbcache jbd2 crc16 sr_mod sd_mod cdrom ahci libahci libata scsi_mod
[ 6569.991778] Pid: 7847, comm: kworker/1:0 Not tainted 2.6.39-ARCH #1
[ 6569.991781] Call Trace:
[ 6569.991792] [<ffffffff8105b90f>] warn_slowpath_common+0x7f/0xc0
[ 6569.991797] [<ffffffff8105b96a>] warn_slowpath_null+0x1a/0x20
[ 6569.991804] [<ffffffffa064df7f>] __e1000_shutdown+0x43f/0x4c0 [e1000e]
[ 6569.991816] [<ffffffff81012fc9>] ? sched_clock+0x9/0x10
[ 6569.991819] [<ffffffffa064e039>] e1000_runtime_suspend+0x39/0x50 [e1000e]
[ 6569.991823] [<ffffffff8100a6cf>] ? __switch_to+0xbf/0x2f0
[ 6569.991828] [<ffffffff812392dd>] pci_pm_runtime_suspend+0x4d/0x100
[ 6569.991830] [<ffffffff81239290>] ? pci_legacy_suspend_late+0x100/0x100
[ 6569.991834] [<ffffffff812e7d52>] rpm_callback+0x42/0x80
[ 6569.991837] [<ffffffff813e4faf>] ? schedule+0x33f/0xad0
[ 6569.991839] [<ffffffff812e82fa>] rpm_suspend+0x1da/0x3f0
[ 6569.991843] [<ffffffff8107701c>] ? queue_delayed_work_on+0xbc/0x150
[ 6569.991846] [<ffffffff812e9380>] ? pm_schedule_suspend+0xe0/0xe0
[ 6569.991848] [<ffffffff812e941a>] pm_runtime_work+0x9a/0xc0
[ 6569.991850] [<ffffffff81077f6e>] process_one_work+0x11e/0x4c0
[ 6569.991852] [<ffffffff810788ff>] worker_thread+0x15f/0x350
[ 6569.991854] [<ffffffff810787a0>] ? manage_workers.isra.29+0x230/0x230
[ 6569.991857] [<ffffffff8107d6ec>] kthread+0x8c/0xa0
[ 6569.991860] [<ffffffff813e9fe4>] kernel_thread_helper+0x4/0x10
[ 6569.991862] [<ffffffff8107d660>] ? kthread_worker_fn+0x190/0x190
[ 6569.991864] [<ffffffff813e9fe0>] ? gs_change+0x13/0x13
[ 6569.991865] ---[ end trace c54917cde5791882 ]---
[ 6570.221032] e1000e 0000:00:19.0: PME# enabled
[ 6570.464118] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 6570.466279] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 6570.644945] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 6571.823780] e1000e 0000:00:19.0: BAR 0: set to [mem 0xf2600000-0xf261ffff] (PCI address [0xf2600000-0xf261ffff])
[ 6571.823791] e1000e 0000:00:19.0: BAR 1: set to [mem 0xf2625000-0xf2625fff] (PCI address [0xf2625000-0xf2625fff])
[ 6571.823800] e1000e 0000:00:19.0: BAR 2: set to [io 0x1820-0x183f] (PCI address [0x1820-0x183f])
[ 6571.823821] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 6571.823847] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[ 6571.823885] e1000e 0000:00:19.0: PME# disabled
[ 6571.823965] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 6571.826445] e1000e 0000:00:19.0: eth0: PHY Wakeup cause - Link Status Change
[ 6573.521494] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[ 6573.521500] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 6573.521814] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

The kernel is still the same 2.6.39.3

Hope that helps.

I'll keep trying to reproduce the crash - will probably build a 3.0.1 with
lots of debug options enabled and try to reproduce with that.

--
Jesper Juhl <jj@chaosbits.net> http://www.chaosbits.net/
Don't top-post http://www.catb.org/jargon/html/T/top-post.html
Plain text mails only, please.



\
 
 \ /
  Last update: 2011-08-06 10:59    [W:0.396 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site