lkml.org 
[lkml]   [2011]   [Aug]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] config: Update device configurations for MID generic devices
Date
From: Alan Cox <alan@linux.intel.com>

Some of our support is not Moorestown specific. We can now use the new
symbols to untangle this.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

arch/x86/Kconfig | 4 ++--
arch/x86/include/asm/fixmap.h | 2 +-
arch/x86/include/asm/setup.h | 2 +-
arch/x86/pci/Makefile | 2 +-
arch/x86/platform/mrst/Makefile | 4 ++--
drivers/platform/x86/Kconfig | 2 +-
drivers/rtc/Kconfig | 4 ++--
drivers/staging/gma500/mrst_lvds.c | 1 -
8 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5c2b225..ac036fa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -663,8 +663,8 @@ config HPET_EMULATE_RTC
depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)

config APB_TIMER
- def_bool y if MRST
- prompt "Langwell APB Timer Support" if X86_MRST
+ def_bool y if X86_INTEL_MID
+ prompt "Intel MID platform APB Timer Support" if X86_INTEL_MID
select DW_APB_TIMER
help
APB timer is the replacement for 8254, HPET on X86 MID platforms.
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 460c74e..4da3c0c 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -117,7 +117,7 @@ enum fixed_addresses {
#endif
FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */
FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
-#ifdef CONFIG_X86_MRST
+#ifdef CONFIG_X86_INTEL_MID
FIX_LNW_VRTC,
#endif
__end_of_permanent_fixed_addresses,
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 9756551..d0f19f9 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -47,7 +47,7 @@ extern void reserve_standard_io_resources(void);
extern void i386_reserve_resources(void);
extern void setup_default_timer_irq(void);

-#ifdef CONFIG_X86_MRST
+#ifdef CONFIG_X86_INTEL_MID
extern void x86_mrst_early_setup(void);
#else
static inline void x86_mrst_early_setup(void) { }
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 6b8759f..75b06f3 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_X86_VISWS) += visws.o

obj-$(CONFIG_X86_NUMAQ) += numaq_32.o

-obj-$(CONFIG_X86_MRST) += mrst.o
+obj-$(CONFIG_X86_INTEL_MID) += mrst.o

obj-y += common.o early.o
obj-y += amd_bus.o bus_numa.o
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index ddeec73..7baed51 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_X86_MRST) += mrst.o
-obj-$(CONFIG_X86_MRST) += vrtc.o
+obj-$(CONFIG_X86_INTEL_MID) += mrst.o
+obj-$(CONFIG_X86_INTEL_MID) += vrtc.o
obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_mrst.o
obj-$(CONFIG_X86_MRST) += pmu.o
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 91d0d4b..ac38495 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -637,7 +637,7 @@ config ACPI_CMPC

config INTEL_SCU_IPC
bool "Intel SCU IPC Support"
- depends on X86_MRST
+ depends on X86_INTEL_MID
default y
---help---
IPC is used to bridge the communications between kernel and SCU on
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 5a538fc..ae1b922 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -499,8 +499,8 @@ config RTC_DRV_CMOS

config RTC_DRV_VRTC
tristate "Virtual RTC for Moorestown platforms"
- depends on X86_MRST
- default y if X86_MRST
+ depends on X86_INTEL_MID
+ default y if X86_INTEL_MID

help
Say "yes" here to get direct support for the real time clock
diff --git a/drivers/staging/gma500/mrst_lvds.c b/drivers/staging/gma500/mrst_lvds.c
index e7999a2..133401e 100644
--- a/drivers/staging/gma500/mrst_lvds.c
+++ b/drivers/staging/gma500/mrst_lvds.c
@@ -348,7 +348,6 @@ void mrst_lvds_init(struct drm_device *dev,
*/

i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus);
-
if (i2c_adap == NULL)
dev_err(dev->dev, "No ddc adapter available!\n");
/*


\
 
 \ /
  Last update: 2011-08-26 12:29    [W:0.041 / U:42.780 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site