lkml.org 
[lkml]   [2011]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/5] writeback: dirty position control
From
Date
On Wed, 2011-08-24 at 08:12 +0800, Wu Fengguang wrote:
> > You somehow directly jump to
> >
> > balanced_rate = task_ratelimit_200ms * write_bw / dirty_rate
> >
> > without explaining why following will not work.
> >
> > balanced_rate_(i+1) = balance_rate(i) * write_bw / dirty_rate
>
> Thanks for asking that, it's probably the root of confusions, so let
> me answer it standalone.
>
> It's actually pretty simple to explain this equation:
>
> write_bw
> balanced_rate = task_ratelimit_200ms * ---------- (1)
> dirty_rate
>
> If there are N dd tasks, each task is throttled at task_ratelimit_200ms
> for the past 200ms, we are going to measure the overall bdi dirty rate
>
> dirty_rate = N * task_ratelimit_200ms (2)
>
> put (2) into (1) we get
>
> balanced_rate = write_bw / N (3)
>
> So equation (1) is the right estimation to get the desired target (3).
>
>
> As for
>
> write_bw
> balanced_rate_(i+1) = balanced_rate_(i) * ---------- (4)
> dirty_rate
>
> Let's compare it with the "expanded" form of (1):
>
> write_bw
> balanced_rate_(i+1) = balanced_rate_(i) * pos_ratio * ---------- (5)
> dirty_rate
>
> So the difference lies in pos_ratio.
>
> Believe it or not, it's exactly the seemingly use of pos_ratio that
> makes (5) independent(*) of the position control.
>
> Why? Look at (4), assume the system is in a state
>
> - dirty rate is already balanced, ie. balanced_rate_(i) = write_bw / N
> - dirty position is not balanced, for example pos_ratio = 0.5
>
> balance_dirty_pages() will be rate limiting each tasks at half the
> balanced dirty rate, yielding a measured
>
> dirty_rate = write_bw / 2 (6)
>
> Put (6) into (4), we get
>
> balanced_rate_(i+1) = balanced_rate_(i) * 2
> = (write_bw / N) * 2
>
> That means, any position imbalance will lead to balanced_rate
> estimation errors if we follow (4). Whereas if (1)/(5) is used, we
> always get the right balanced dirty ratelimit value whether or not
> (pos_ratio == 1.0), hence make the rate estimation independent(*) of
> dirty position control.
>
> (*) independent as in real values, not the seemingly relations in equation


The assumption here is that N is a constant.. in the above case
pos_ratio would eventually end up at 1 and things would be good again. I
see your argument about oscillations, but I think you can introduce
similar effects by varying N.


\
 
 \ /
  Last update: 2011-08-24 18:15    [W:0.558 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site