Messages in this thread |  | | Date | Thu, 18 Aug 2011 11:30:32 +0800 | | From | Wanlong Gao <> | | Subject | Re: [PATCH 6/6] Input: elantech - add v3 hardware support |
| |
On 08/18/2011 09:57 AM, JJ Ding wrote: > v3 hardware's packet format is almost identical to v2 (one/three finger touch), > except when sensing two finger touch, the hardware sends 12 bytes of data. > > Signed-off-by: JJ Ding<jj_ding@emc.com.tw> > --- > Documentation/input/elantech.txt | 104 ++++++++++++++++-- > drivers/input/mouse/elantech.c | 218 ++++++++++++++++++++++++++++++++++--- > drivers/input/mouse/elantech.h | 11 ++ > 3 files changed, 303 insertions(+), 30 deletions(-)
> +The packet format is exactly the same for two finger touch, except the hardware > +sends two 6 byte packets. The first packet contains data for the first finger, > +the second packet has data for the second finger. So for two finger touch a > +total of 12 bytes are sent. > diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c > index ddd40eb..e13a719 100644 > --- a/drivers/input/mouse/elantech.c > +++ b/drivers/input/mouse/elantech.c > @@ -108,6 +108,16 @@ static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg, > rc = -1; > } > break; > + > + case 3: > + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || > + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || > + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || > + elantech_ps2_command(psmouse, NULL, reg) || > + elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) { > + rc = -1; > + } Prefer to remove these big brace ? also with "case 1, case 2 "? > + break; > } > > if (rc) > @@ -154,6 +164,18 @@ static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg, > rc = -1; > } > break; > + > + case 3: > + if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || > + elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) || > + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || > + elantech_ps2_command(psmouse, NULL, reg) || > + elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) || > + elantech_ps2_command(psmouse, NULL, val) || > + elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) { > + rc = -1; > + } ditto
-- Thanks Wanlong Gao
|  |