lkml.org 
[lkml]   [2011]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drivers/misc: introduce Freescale Data Collection Manager driver
On Mon, Aug 01, 2011 at 11:58:00PM +0000, Tabi Timur-B04825 wrote:
> Mark Brown wrote:
> > On Mon, Aug 01, 2011 at 04:48:54PM -0500, Timur Tabi wrote:

> >> PowerPC reference boards that can read temperature, current, and voltage
> >> settings from the sensors on those boards. This driver exposes the DCM via a
> >> sysfs interface (/sys/devices/platform/fsl-ocm.0).

> > This sounds like it should be a hwmon driver.

> I didn't see any way to interface the hardware to the hwmon layer in a
> manner that provides the information that our customers went using this
> hardware.

Even if that's the case I can't see that it is a good reason for adding
a driver out of any subsystem with a completely non-standard interface.

> > Though this is a bit odd for the subsystem I don't think it's too far
> > out of what other hwmon chips can do, some of them do have longer term
> > stats than just instantaneous readings.

> Can you show an example or some documentation? I couldn't find anything
> remotely like that. I don't even see anything that lets me start/stop
> monitoring of sensors.

I'd expect that things like the _lowest, _highest and _average
attributes which a number of drivers have are what you're looking for.
At the very least it seems obvious how you might extend the interface if
some features you need are missing. The subsystem has fairly extensive
documentation in Documentation/hwmon.


\
 
 \ /
  Last update: 2011-08-02 03:59    [W:0.053 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site