lkml.org 
[lkml]   [2011]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] regmap: Add I2C bus support
Date
We initialise at postcore_initcall() so that we are available before users
- some users such as PMICs initialise very early. We won't actually try to
use any of the bus until a device initialises a register map.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
---
drivers/base/regmap/Makefile | 2 +-
drivers/base/regmap/regmap-i2c.c | 113 ++++++++++++++++++++++++++++++++++++++
2 files changed, 114 insertions(+), 1 deletions(-)
create mode 100644 drivers/base/regmap/regmap-i2c.c

diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index 1e5037e..641c20a 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_REGMAP) += regmap.o
-
+obj-$(CONFIG_I2C) += regmap-i2c.o
diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c
new file mode 100644
index 0000000..19d0739
--- /dev/null
+++ b/drivers/base/regmap/regmap-i2c.c
@@ -0,0 +1,113 @@
+/*
+ * Register map access API - I2C support
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+static int regmap_i2c_write(struct device *dev, const void *data, size_t count)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+ int ret;
+
+ ret = i2c_master_send(i2c, data, count);
+ if (ret == count)
+ return 0;
+ else if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+static int regmap_i2c_gather_write(struct device *dev,
+ const void *reg, size_t reg_size,
+ const void *val, size_t val_size)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct i2c_msg xfer[2];
+ int ret;
+
+ /* If the I2C controller can't do a gather tell the core, it
+ * will substitute in a linear write for us.
+ */
+ if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_PROTOCOL_MANGLING))
+ return -ENOTSUPP;
+
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = reg_size;
+ xfer[0].buf = (void *)reg;
+
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_NOSTART;
+ xfer[1].len = val_size;
+ xfer[1].buf = (void *)val;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ if (ret == 2)
+ return 0;
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+static int regmap_i2c_read(struct device *dev,
+ const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct i2c_msg xfer[2];
+ int ret;
+
+ if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_PROTOCOL_MANGLING))
+ return -ENOTSUPP;
+
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = reg_size;
+ xfer[0].buf = (void *)reg;
+
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = val_size;
+ xfer[1].buf = val;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ if (ret == 2)
+ return 0;
+ else if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+}
+
+static struct regmap_bus regmap_i2c = {
+ .type = &i2c_bus_type,
+ .write = regmap_i2c_write,
+ .gather_write = regmap_i2c_gather_write,
+ .read = regmap_i2c_read,
+ .owner = THIS_MODULE,
+};
+
+static int __init regmap_i2c_init(void)
+{
+ regmap_add_bus(&regmap_i2c);
+ return 0;
+}
+postcore_initcall(regmap_i2c_init);
+
+static void __exit regmap_i2c_exit(void)
+{
+ regmap_del_bus(&regmap_i2c);
+}
+module_exit(regmap_i2c_exit);
--
1.7.5.4


\
 
 \ /
  Last update: 2011-07-09 06:53    [W:0.101 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site