lkml.org 
[lkml]   [2011]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH RFCv3 09/17] [media] nxt6000: i2c bus error should return -EIO
-EFAULT is used to indicate that there were a problem when copying
data from/to userspace. Don't mix it with I2C bus error (-EIO).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c
index a763ec7..6599b8f 100644
--- a/drivers/media/dvb/frontends/nxt6000.c
+++ b/drivers/media/dvb/frontends/nxt6000.c
@@ -50,7 +50,7 @@ static int nxt6000_writereg(struct nxt6000_state* state, u8 reg, u8 data)
if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1)
dprintk("nxt6000: nxt6000_write error (reg: 0x%02X, data: 0x%02X, ret: %d)\n", reg, data, ret);

- return (ret != 1) ? -EFAULT : 0;
+ return (ret != 1) ? -EIO : 0;
}

static u8 nxt6000_readreg(struct nxt6000_state* state, u8 reg)
--
1.7.1



\
 
 \ /
  Last update: 2011-07-06 20:07    [W:0.031 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site