lkml.org 
[lkml]   [2011]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] gpio/mxc: add device tree probe support
Date
The patch adds device tree probe support for gpio-mxc driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
---
.../devicetree/bindings/gpio/fsl-imx-gpio.txt | 22 +++++++++++++
drivers/gpio/gpio-mxc.c | 34 ++++++++++++++++---
2 files changed, 50 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt

diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
new file mode 100644
index 0000000..4363ae4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
@@ -0,0 +1,22 @@
+* Freescale i.MX/MXC GPIO controller
+
+Required properties:
+- compatible : Should be "fsl,<soc>-gpio"
+- reg : Address and length of the register set for the device
+- interrupts : Should be the port interrupt shared by all 32 pins, if
+ one number. If two numbers, the first one is the interrupt shared
+ by low 16 pins and the second one is for high 16 pins.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify optional parameters (currently
+ unused).
+
+Example:
+
+gpio0: gpio@73f84000 {
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+};
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 310a46d..b7ff0a5 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -27,6 +27,8 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/basic_mmio_gpio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm-generic/bug.h>

enum mxc_gpio_hwtype {
@@ -120,6 +122,13 @@ static struct platform_device_id mxc_gpio_devtype[] = {
}
};

+static const struct of_device_id mxc_gpio_dt_ids[] = {
+ { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], },
+ { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
+ { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
+ { /* sentinel */ }
+};
+
/*
* MX2 has one interrupt *for all* gpio ports. The list is used
* to save the references to all ports, so that mx2_gpio_irq_handler
@@ -302,7 +311,13 @@ static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port)

static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)
{
- enum mxc_gpio_hwtype hwtype = pdev->id_entry->driver_data;
+ const struct of_device_id *of_id =
+ of_match_device(mxc_gpio_dt_ids, &pdev->dev);
+ enum mxc_gpio_hwtype hwtype;
+
+ if (of_id)
+ pdev->id_entry = of_id->data;
+ hwtype = pdev->id_entry->driver_data;

if (mxc_gpio_hwtype) {
/*
@@ -324,6 +339,7 @@ static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)

static int __devinit mxc_gpio_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct mxc_gpio_port *port;
struct resource *iores;
int err;
@@ -334,8 +350,6 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
if (!port)
return -ENOMEM;

- port->virtual_irq_start = MXC_GPIO_IRQ_START + pdev->id * 32;
-
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iores) {
err = -ENODEV;
@@ -365,9 +379,6 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
writel(0, port->base + GPIO_IMR);
writel(~0, port->base + GPIO_ISR);

- /* gpio-mxc can be a generic irq chip */
- mxc_gpio_init_gc(port);
-
if (mxc_gpio_hwtype == IMX21_GPIO) {
/* setup one handler for all GPIO interrupts */
if (pdev->id == 0)
@@ -398,6 +409,16 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
if (err)
goto out_bgpio_remove;

+ /*
+ * In dt case, we use gpio number range dynamically
+ * allocated by gpio core.
+ */
+ port->virtual_irq_start = MXC_GPIO_IRQ_START + (np ? port->bgc.gc.base :
+ pdev->id * 32);
+
+ /* gpio-mxc can be a generic irq chip */
+ mxc_gpio_init_gc(port);
+
list_add_tail(&port->node, &mxc_gpio_ports);

return 0;
@@ -418,6 +439,7 @@ static struct platform_driver mxc_gpio_driver = {
.driver = {
.name = "gpio-mxc",
.owner = THIS_MODULE,
+ .of_match_table = mxc_gpio_dt_ids,
},
.probe = mxc_gpio_probe,
.id_table = mxc_gpio_devtype,
--
1.7.4.1



\
 
 \ /
  Last update: 2011-07-06 18:49    [W:0.220 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site