lkml.org 
[lkml]   [2011]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: serial/pch_uart: AT command behavior
On Wed, 20 Jul 2011 09:14:42 +0900
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> wrote:

> (2011/07/19 18:06), Alan Cox wrote:
> > On Tue, 19 Jul 2011 13:15:57 +0900
> > Tomoya MORINAGA<tomoya-linux@dsn.okisemi.com> wrote:
> >
> >> Hi,
> >>
> >> I have a question for UART driver AT command behavior.
> >> When installing pch_uart, AT command "AT+GCAP^M" are sent for 4 times.
> >> This command is sent first install only.
> >> (After the above, removing pch_uart and installing pch_uart again,
> >> this command is not sent.)
> >>
> >> Let me know the behavior is normal or not ?
> >
> > As your distribution, it isn't the kernel.
> >
> Thank you for your information.
> The above behavior looks Fedora's.
> In fact,I confirmed MeeGo doesn't send any AT command message.

AT+GCAP is apparently 'serial plug and play' so I assume this is part of
the Fedora autodetection/udev logic.


\
 
 \ /
  Last update: 2011-07-20 14:49    [W:0.157 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site