lkml.org 
[lkml]   [2011]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/1] Fixup write permission of TLB on powerpc e500 core
On 07/18/2011 12:01 PM, Benjamin Herrenschmidt wrote:
> On Mon, 2011-07-18 at 09:14 +1000, Benjamin Herrenschmidt wrote:
>
>> In fact, with such a flag, we could probably avoid the ifdef entirely, and
>> always go toward the PTE fixup path when called in such a fixup case, my gut
>> feeling is that this is going to be seldom enough not to hurt x86 measurably
>> but we'll have to try it out.
>>
>> That leads to that even less tested patch:
> And here's a version that builds and fixes a bug or two
> (still not tested :-)
>
> Shan, can you verify whether that fixes the problem for you ?
>

It could not fix the problem, refer the following reply for
the reasons.

> I also had a cursory glance at the ARM code and it seems to rely on the
> same stuff as embedded powerpc does for dirty/young updates, so in
> theory it should exhibit the same problem.
>
> I suspect the scenario is rare enough in practice in embedded workloads
> that nobody noticed until now.
>
> Cheers,
> Ben.
>
> mm/futex: Fix use of gup() to "fixup" failing atomic user accesses
>
> The futex code uses atomic (page fault disabled) accesses to user space,
> and when they fail, uses get_user_pages() to "fixup" the PTE and try again.
>
> However, on arch with SW tracking of the dirty and young bits, this will
> not work properly as neither of the above will perform the necessary fixup
> of those bits.
>
> There's also a possible corner cases with archs who rely on
> handle_pte_fault() to invalidate the TLB for "spurrious" faults (though
> I don't know which arch actually needs that). Those would break the
> same way.
>
> This fixes it by factoring out the fixup code from handle_pte_fault() into
> a separate function, and use it from within gup as well, whenever the
> FOLL_FIXFAULT flag has been passed to it. The futex code is modified to
> pass that flag.
>
> This doesn't change the "normal" gup case (and thus avoids the overhead
> of doing that tracking)
>
> Signed-off-by: Benjamin Herrenschmidt<benh@kernel.crashing.org>
> ---
>
> diff --git a/include/linux/mm.h b/include/linux/mm.h
> index 9670f71..8a76694 100644
> --- a/include/linux/mm.h
> +++ b/include/linux/mm.h
> @@ -1546,6 +1546,7 @@ struct page *follow_page(struct vm_area_struct *, unsigned long address,
> #define FOLL_MLOCK 0x40 /* mark page as mlocked */
> #define FOLL_SPLIT 0x80 /* don't return transhuge pages, split them */
> #define FOLL_HWPOISON 0x100 /* check page is hwpoisoned */
> +#define FOLL_FIXFAULT 0x200 /* fixup after a fault (PTE dirty/young upd) */
>
> typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr,
> void *data);
> diff --git a/kernel/futex.c b/kernel/futex.c
> index fe28dc2..02adff7 100644
> --- a/kernel/futex.c
> +++ b/kernel/futex.c
> @@ -355,8 +355,8 @@ static int fault_in_user_writeable(u32 __user *uaddr)
> int ret;
>
> down_read(&mm->mmap_sem);
> - ret = get_user_pages(current, mm, (unsigned long)uaddr,
> - 1, 1, 0, NULL, NULL);
> + ret = __get_user_pages(current, mm, (unsigned long)uaddr, 1,
> + FOLL_WRITE | FOLL_FIXFAULT, NULL, NULL, NULL);

the FOLL_FIXFAULT is filtered out at the following code
get_user_pages()
if (write)
flags |= FOLL_WRITE;

> up_read(&mm->mmap_sem);
>
> return ret< 0 ? ret : 0;
> diff --git a/mm/memory.c b/mm/memory.c
> index 40b7531..3c4d502 100644
> --- a/mm/memory.c
> +++ b/mm/memory.c
> @@ -1419,6 +1419,29 @@ int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
> }
> EXPORT_SYMBOL_GPL(zap_vma_ptes);
>
> +static void handle_pte_sw_young_dirty(struct vm_area_struct *vma,
> + unsigned long address,
> + pte_t *ptep, int write)
> +{
> + pte_t entry = *ptep;
> +
> + if (write)
> + pte_mkdirty(entry);
> + entry = pte_mkyoung(entry);
> + if (ptep_set_access_flags(vma, address, ptep, entry, write)) {
> + update_mmu_cache(vma, address, ptep);
> + } else {
> + /*
> + * This is needed only for protection faults but the arch code
> + * is not yet telling us if this is a protection fault or not.
> + * This still avoids useless tlb flushes for .text page faults
> + * with threads.
> + */
> + if (write)
> + flush_tlb_fix_spurious_fault(vma, address);
> + }
> +}
> +
> /**
> * follow_page - look up a page descriptor from a user-virtual address
> * @vma: vm_area_struct mapping @address
> @@ -1514,6 +1537,10 @@ split_fallthrough:
>
> if (flags& FOLL_GET)
> get_page(page);
> +
> + if (flags& FOLL_FIXFAULT)
> + handle_pte_sw_young_dirty(vma, address, ptep,
> + flags& FOLL_WRITE);
> if (flags& FOLL_TOUCH) {
> if ((flags& FOLL_WRITE)&&
> !pte_dirty(pte)&& !PageDirty(page))

call handle_pte_sw_young_dirty before !pte_dirty(pte)
might has problems.

> @@ -1525,6 +1552,7 @@ split_fallthrough:
> */
> mark_page_accessed(page);
> }
> +
> if ((flags& FOLL_MLOCK)&& (vma->vm_flags& VM_LOCKED)) {
> /*
> * The preliminary mapping check is mainly to avoid the
> @@ -3358,21 +3386,8 @@ int handle_pte_fault(struct mm_struct *mm,
> if (!pte_write(entry))
> return do_wp_page(mm, vma, address,
> pte, pmd, ptl, entry);
> - entry = pte_mkdirty(entry);
> - }
> - entry = pte_mkyoung(entry);
> - if (ptep_set_access_flags(vma, address, pte, entry, flags& FAULT_FLAG_WRITE)) {
> - update_mmu_cache(vma, address, pte);
> - } else {
> - /*
> - * This is needed only for protection faults but the arch code
> - * is not yet telling us if this is a protection fault or not.
> - * This still avoids useless tlb flushes for .text page faults
> - * with threads.
> - */
> - if (flags& FAULT_FLAG_WRITE)
> - flush_tlb_fix_spurious_fault(vma, address);
> }
> + handle_pte_sw_young_dirty(vma, address, pte, flags& FAULT_FLAG_WRITE);
> unlock:
> pte_unmap_unlock(pte, ptl);
> return 0;
>
>

So what about the following?
diff --git a/mm/memory.c b/mm/memory.c
index 9b8a01d..fb48122 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1442,6 +1442,7 @@ struct page *follow_page(struct vm_area_struct
*vma, unsig
spinlock_t *ptl;
struct page *page;
struct mm_struct *mm = vma->vm_mm;
+ int fix_write_permission = false;

page = follow_huge_addr(mm, address, flags & FOLL_WRITE);
if (!IS_ERR(page)) {
@@ -1519,6 +1520,11 @@ split_fallthrough:
if ((flags & FOLL_WRITE) &&
!pte_dirty(pte) && !PageDirty(page))
set_page_dirty(page);
+
+#ifdef CONFIG_FIXUP_WRITE_PERMISSION
+ if ((flags & FOLL_WRITE) && !pte_dirty(pte))
+ fix_write_permission = true;
+#endif
/*
* pte_mkyoung() would be more correct here, but atomic
care
* is needed to avoid losing the dirty bit: it is
easier to use
@@ -1551,7 +1557,7 @@ split_fallthrough:
unlock:
pte_unmap_unlock(ptep, ptl);
out:
- return page;
+ return (fix_write_permission == true) ? NULL: page;

bad_page:
pte_unmap_unlock(ptep, ptl);


From the CONFIG_FIXUP_WRITE_PERMISSION and
(flags & FOLL_WRITE) && !pte_dirty(pte) the follow_page()
could figure out that the caller want to write to the
(present && writable && non-dirty) pte, and the architecture
want to fixup the problem by indicating CONFIG_FIXUP_WRITE_PERMISSION,
so let the follow_page() return NULL to the __get_user_pages, and
let the handle_mm_fault to fixup dirty/young tracking.

Checking the following code we can conclude that the handle_mm_fault
is ready to handle the faults and the write permission violation is
a kind of fault, so why don't we let the handle_mm_fault to
handle that fault?

__get_user_pages()
while (!(page = follow_page(vma, start, foll_flags))) {
...
ret = handle_mm_fault(mm, vma, start,
fault_flags);
...
}
Thanks
Shan Hai


\
 
 \ /
  Last update: 2011-07-18 08:47    [W:0.095 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site